The human population which grows by about 2 percent each year, is showing linear growth.
What is linear increment?
A linear increment occurs when a sequence increases gradually with a constant value.
If a population increases at the rate of 2%, the incremental rate or constant factor is 2%, thus, we can conclude that the human population which grows by about 2 percent each year, is showing linear growth.
Learn more about linear increment here: https://brainly.com/question/2511791
#SPJ1
Norma kicks a soccer ball with an initial velocity of 10.0 meters per second at an angle of 30.0°.
If the ball moves through the air for 3.2 seconds, what is the horizontal distance traveled by the ball? Round your answer to the nearest tenth.
Answer: 30
Explanation:
Calculate the energy used by a radio of power 30W in 1 minute.
Answer:
1.8kJ
Explanation:
Formula :
Energy used = Power x time
===============================================================
Given :
⇒ Power = 30 W
⇒ Time = 1 minute = 60 seconds
=============================================================
Solving :
⇒ Energy used = 30 W × 60 s
⇒ Energy used = 1,800 J
⇒ Energy used = 1.8kJ
Answer:
1800 joule (1.8kJ)
Explanation:
Formula:
Power = Work / Time
30 = Work / 60
Work = 1800 joule
Work = 1.8kJ
Energy = Work done = 1.8kJ
Hence, Energy used is 1.8kJ.
There are uniform cubes in a toy box, a child makes a pillar using these cubes on a rough plane which is inclined to the horizontal at angle theta. The cubes do not slide on each other. If tan theta = 1/8, the max no. of cubes that can be stacked is,
A. 4
B. 5
C. 8
D. 16
Please explain the methods of obtaining the ans . Will mark the brainliest for the best ans
The maximum number of cubes that can be stacked on the inclined plane without sliding is determined as 8.
Net force on the box
The net force on the box can be used to determine the maximum number of cubes that can be stacked without sliding.
The stack cubes must be at equilibrium.
∑Fx = 0
nW - μFₙ = 0
where;
n is number of the cubesFₙ is the normal force of the cubesW is the weight of the cubes acting parallel to the planen(mg)sinθ - μmgcosθ = 0
n(mg)sinθ = μmgcosθ
nsinθ = μcosθ
let the coefficient of friction = 1nsinθ = cosθ
n = cosθ/sinθ
n = 1/tanθ
n = (1)/(1/8)
n = 8
Thus, the maximum number of cubes that can be stacked on the inclined plane without sliding is determined as 8.
Learn more about cubes here: https://brainly.com/question/1972490
#SPJ1
A scientist claims that a certain type of fabric is better able to repel water than another. Which option describes an experiment that will produce evidence that will support or refute her claim?
A. Test groups of each kind of fabric by exposing them to the same amount of water for the same amount of time.
B. Test groups of each kind of fabric by exposing them to the same amount of water for different amounts of time?
C. Test a group of one kind of fabric by spraying water on it, and a group of the other fabric by submerging it.
D. Test a group of one fabric by spraying it with distilled water, and a group of the other fabric by spraying it with salt water.
The best way would be to test groups of each kind of fabric by exposing them to the same amount of water for the same amount of time. The correct option is A.
Scientific experimentsIn conducting scientific experiments to compare test subjects such as the fabrics mentioned in the illustration, the test subjects must be subjected to the same conditions.
The outcome of the experiment will no longer be scientifically valid if the test subjects are not exposed to the same condition.
Thus, the two fabrics must be exposed to the same amount of water for the same amount of time in order to come to a valid conclusion about which is a better water repeller among the two.
More on scientific experiments can be found here: https://brainly.com/question/2449529
#SPJ1
The 85-lb force P is applied to the 200-lb crate, which is stationary before the force is applied. Determine the magnitude and direction of the friction force F exerted by the horizontal surface on the crate.
The direction of the friction force F exerted by the horizontal surface on the crate will be in the left direction.
How to depict the force?From the information given, the 85-lb force P is applied to the 200-lb crate, which is stationary before the force is applied.
mg = 200 × 0.2248 × 9.8 = 440.608
The static friction force will be:
= 0.5 × 440.608
= 220.304N
Therefore, the static friction is greater than the force applied. Therefore, there'll be a static friction acting on the box on the left direction.
Learn more about force on:
brainly.com/question/12970081
#SPJ4
A bicyclist moving at a constant speed takes 10.0 seconds to travel 500 meters down a path inclined 30.0° downward from the horizontal. what is the vertical velocity of this motion? a. 18.3 meters/second b. 43.3 meters/second c. 25.0 meters/second d. 28.9 meters/second e. 32.1 meters/second
A bicyclist moving at a constant speed takes 10.0 seconds to travel 500 meters down a path inclined 30.0° downward from the horizontal. the vertical velocity of this motion is mathematically given as
V' = 25 m/s. Option C.
What is the vertical velocity of this motion?Generally, the equation for the Inclined Component is mathematically given as
V=d/s
Therefore
V = 500/10
V= 50 m/s
In conclusion, for the vertical Component
[tex]V'= dsin \theta[/tex]
V'= 50Sin30
V' = 25 m/s
Read more about Motion
https://brainly.com/question/605631
#SPJ1
8. A round tube weighs 30 kg. If the tube is stood on end, it pushes down on the floor with a pressure of 20 N/m². How many square inches is the end of the tube
Answer:
22785 square inches
Explanation:
As the mass of the tube is 30kg, therefore it is exerting a force of 30g N(30g = 30 × 9.8 = 294)So the force is 294 N.Pressure is 20 N/m², as given.As we know Pressure is equal to the force exerted per unit area (P=F/A).Therefore, A=F/PA = 294 ÷ 20 = 14.7 m²
As 1 m² = 1550 square inches. Therefore, 14.7 m² = 14.7 × 1550 square inches = 22785 square inchesIf you want to know something more about pressure, force, and area, you can refer to this link:
https://brainly.in/question/1440079
Determine the force p required to (a) raise and (b) lower the 40-kg cylinder at a slow, steady speed. the coefficient of friction between the cord and its supporting surface is 0.30.
Answer:
T - M g - Ff = M a describes the acceleration of the object
T = M g + Ff if the object moves at constant speed (a = zero)
Ff = μ M g = .3 * 40 * 9.8 = 118 N the force of friction
Ff will be in a direction opposite to the motion
M g = 40 kg * 9.8 m/s = 392 N
a) T = M g + Ff for an object moving upwards
T = 392 + 118 = 510 N
b) T = M g - Ff for an object moving downwards
T = 392 - 118 = 274 N
Pls help me l will make it brainlest
Answer:
0.04 °C⁻¹
Explanation:
First, we need to calculate linear expansivity, then after finding that value, we can move on to finding the area expansivity.
=============================================================
Finding Linear Expansivity :
⇒ α = Final length - Original length / (Original length × ΔT)
⇒ α = 9 - 4 / (4 × 70 - 20)
⇒ α = 5 / 5 × 50
⇒ α = 0.02
============================================================
Finding Area Expansivity :
⇒ Area Expansivity = 2 × Linear Expansivity
⇒ β = 2 × α
⇒ β = 2 × 0.02
⇒ β = 0.04 °C⁻¹
Calculate the value of the area expansion of a steel rod of lenght 4cm at 20°c after heating attains another length of 9cm at 70°c.
Area = 0.02
Area Expansity = [tex]0.0 {4}^{ - 1} [/tex]
Every summer I drive to Pennsylvania. It is 895 km to get there. If I average 100 km/hr, how much time will I spend driving?
Answer the time you bee spending driving iss 795 because 895-795=100
Explanation:
If the _ of the proteins changes, this is called a mutation
Answer:
If the DNA of the proteins changes, this is called a mutation.
Explanation: Hope it helps you :))))
Have a good day
Scientists are making plans to put a probe in orbit around Earth. They want the probe to enter the orbit shown below.
An illustration of the earth with a concentric circle around the earth with arrowheads in the counterclockwise direction. At the top of the circle is a black dot with a vector labeled Y away from the center of the circle, a vector labeled W toward the center of the circle, a vector tangent to the circle and clockwise labeled Z and a vector labeled X tangent to the circle and counterclockwise.
Which arrow shows the direction that the probe should be moving in order for it to enter the orbit?
An arrow which shows the direction that the probe should be moving in order for it to enter the orbit is X.
What is an orbit?An orbit can be defined as the curved path through which a astronomical (celestial) object such as planet Earth, in space move around a Moon, Sun, planet or star.
In this scenario, if the scientists want the probe to enter the orbit they should ensure that probe moves in direction X. This ultimately implies that, the probe must move in the same direction as the orbit, in order to enter it.
Read more on orbit here: https://brainly.com/question/18496962
#SPJ1
Answer:
(b)
Explanation:
X
A bungee jumper jumps off a bridge and bounces up and down several times.
She finally comes to rest 16 m below the bridge from which she just jumped.
If her mass is 50 kg and the spring constant of the bungee cord is 35 N/m,
how much energy was lost due to air resistance while she was bouncing?
(Recall that g = 9.8 m/s²)
OA. 5420 N
OB. 3360 N
OC. 4280 N
O D. 6550 N
The energy that was lost due to air resistance while she was bouncing is determined as 3,360 J.
Conservation of energyThe amount of energy lost due to air resistance while she was bouncing is determined from the principle of conservation of energy.
ΔE = P.E - Ux
ΔE = mgh - ¹/₂kx²
ΔE = (50)(9.8)(16) - ¹/₂(35)(16)²
ΔE = 3,360 J
Thus, the energy that was lost due to air resistance while she was bouncing is determined as 3,360 J.
Learn more about energy here: https://brainly.com/question/13881533
#SPJ1
Engineers are trying to improve a race car. Their goal is to increase the acceleration of the car using the same engine. Which change shows the best application of Newton’s laws of motion to achieve this goal?
increasing the inertia of the car
decreasing the reaction force
increasing the action force
decreasing the mass of the car
Decreasing the mass of the car will help increase the acceleration of the car using application of Newton’s laws of motion.
What is Newton's law of motion?
This law discusses the relationship between motion of a substance and the forces acting on it.
Heavy objects are more difficult to move which is why decrease in mass will help increase the acceleration.
Read more about Newton's law of motion here https://brainly.com/question/10454047
#SPJ1
Answer: decreasing the mass of the car
Explanation: this is for a TLDR trust
When the switch is closed electrons will flow from.
The statement is true, when the switch is closed electrons will flow.
What is current?Current can be defined as the rate of flow of charges or electrons in a given circuit.
Q = It
I = Q/t
where
Q is charget is timeI is currentWhat is a Closed circuit?A closed circuit is a type of circuit in which the wire connection of the circuit is complete and in which current flows.
Switch can be used close or open a circuit.
Thus, the statement is true, when the switch is closed electrons will flow.
Learn more about closed circuits here: https://brainly.com/question/2969220
#SPJ1
What type of motion a particle has if its velocity-time graph is as mentioned below? i) Graph is parallel to the time axis ii)Graph is a straight line passing through the origin and having a constant slope.
The velocity time graph is used to plot the velocity of a body against the time.
What is the velocity time graph?The velocity time graph is used to plot the velocity of a body against the time. The slope of this graph is called the velocity.
Now the following are true regarding the scenarios below;
Graph is parallel to the time axis - This is constant velocity
Graph is a straight line passing through the origin and having a constant slope. - There is a uniform acceleration.
Learn more about velocity time graph:https://brainly.com/question/11290682
#SPJ1
If a rock is thrown downward with an initial speed 6ms then what is the rocks velocity after 4 sec
Answer:
[tex]\huge\boxed{\sf V_f=45.2 \ m/s}[/tex]
Explanation:
Given Data:Initial velocity = [tex]V_i[/tex] = 6 m/s
Time = t = 4 sec
Acceleration due to gravity = g = 9.8 m/s²
Required:Final velocity = [tex]V_f[/tex] = ?
Formula:[tex]v_f=v_i+gt[/tex]
Solution:Put the givens in the formula
[tex]V_f=6 +(9.8)(4)\\\\V_f=6+39.2\\\\V_f=45.2 \ m/s\\\\\rule[225]{225}{2}[/tex]
If a 0.08 kg cell phone falls off a table at 15 m/s, then what is its kinetic energy right before it hits the ground?
The kinetic energy of the phone right before it hits the ground is 9J.
Kinetic energy of the phone
The kinetic energy of the phone right before it hits the ground is calculated as follows;
K.E = ¹/₂mv²
where;
m is mass of the phonev is velocity of the phoneK.E = ¹/₂(0.08)(15)²
K.E = 9 J
Thus, the kinetic energy of the phone right before it hits the ground is 9J.
Learn more about kinetic energy here: https://brainly.com/question/25959744
#SPJ1
What would happen if the atmosphere consisted of pure oxygen.
Answer:
Then our fires would become massive.
Explanation:
Hope this helps
The water in this pot is in the process of changing from a liquid to a gas. Thermal energy is still being added to the water as it vaporizes, but its temperature and the motion of its particles are not increasing. What do you think is happening to the extra energy?
The extra energy allows the molecules to convert states of molecules.
What is heating?When the temperature is increased , the body or particle is said to be heating.
The water in this pot is in the process of changing from a liquid to a gas. Thermal energy is still being added to the water as it vaporizes, but its temperature and the motion of its particles are not increasing.
When the liquid is converted to gas, the temperature reaches the boiling point of water. After boiling, the heat added up will only make the particles to convert its phase and go away in then atmosphere.
Thus, extra energy added helps molecules of water to change its state from liquid to solid.
Learn more about heating.
https://brainly.com/question/1429452
#SPJ1
Please select the word from the list that best fits the definition
the resistance of an object to moving or to stopping
a. gravity
b. inertia
c. gravitational force
Answer:
inertia
Explanation:
the resistance of an object to moving or to stopping
a. gravity
b. inertia
c. gravitational force
Two 1-kg objects, C and D, increase in temperature by the same amount, but the
thermal energy transfer of object C is greater than the thermal energy transfer of
object D. If object C has a specific heat of 235 J/kg-K, which material might object
D be made of?
(A) aluminum
(B) brass
(C) iron
(D) lead
The object D is made up of material Lead. The correct option is D.
What is specific heat?The specific heat is the amount of heat required to change the temperature by 1°C. It is denoted by C.
Two 1-kg objects, C and D, increase in temperature by the same amount, but the thermal energy transfer of object C is greater than the thermal energy transfer of object D. The object C has a specific heat of 235 J/kg-K.
Q = m C ΔT
Qc > Qd
The energy transfer is proportional to specific heat.
Specific heat of D must be less. The possible material with specific heat less than the given value is for Lead material.
Thus, the correct option is D.
Learn more about specific heat,
https://brainly.com/question/11297584
#SPJ1
A motor with a power of 7.0 × 104 watts lifts a loaded elevator to a height of 20.00 meters for 40 seconds. what is the force exerted by the motor on the elevator? a. 1.4 × 104 newtons b. 7.0 × 104 newtons c. 1.4 × 105 newtons d. 2.1 × 105 newtons e. 3.5 × 105 newtons
Answer:
c. 1.4×10^5 N
Explanation:
Work is the product of power and time. It is also the product of force and distance. We can equate these two products to find the distance.
__
Wt = Fd
(7.0×10^4 N·m/s)(40 s) = F(20 m)
F = (7.0×10^4)(40/20) N = 1.4×10^5 N
The force exerted by the motor is 1.4×10^5 newtons.
This diagram shows half of the magnetic field of a bar magnet. Carefully draw in the other
half of the field.
Which way does the magnetic field go? Tick the correct box.
From the north pole to the south pole of the magnet. From the south pole to the north pole of the magnet..
Answer:
Explanation:
3 What is the displacement of a satellite when it makes a complete round along its circular path?
Answer:
0
Explanation:
The displacement is zero since it goes in a full circle and ends up where it started.
When the defibrillator is in use, a potential difference of 4800 V is applied across the
person's chest.
A charge of 0.16 coulombs passes through the person's chest in 4.0 ms
Calculate the resistance of the person's chest.
If a defibrillator is in use with the given potential difference and charge in the given time, the resistance of the person's chest is 120 Ohms.
What is the resistance of the person's chest?From Ohm’s law;
V = I × R
Where V is the voltage or potential difference, potential difference, I is the current and R is the resistance.
Given that;
Potential difference v = 4800VCharge Q = 0.16CTime elapsed t = 4.0ms = ( 4/1000 )s = 0.004sResistance R = ?First, we calculate the current I.
Since current is the electric charge transferred per unit time.
I = Q/t
I = 0.16C / 0.004s
I = 40A
Now, the resistance of the person's chest will be;
V = I × R
R = V / I
R = 4800V / 40A
R = 120Ω
Therefore, If a defibrillator is in use with the given potential difference and charge in the given time, the resistance of the person's chest is 120 Ohms.
Learn more about potential difference: brainly.com/question/2364325
#SPJ1
Click this link to view O*NET’s Work Styles section for Postal Service Mail Carriers. (Common work styles are listed near the top and less-common work styles are near the bottom.) According to O*NET, which common work styles do Postal Service Mail Carriers need? Select four options.
dependability
creativity
leadership
integrity
self-control
attention to detail
The common work styles do Postal Service Mail Carriers need creativity, integrity, self-control and attention to detail.
They commonly sort mail and orchestrate it arranged by their conveyance course. They convey the mail by walking or any vehicle. They also gather mail and convey it to the post office. Mail transporters answer clients inquiries, provide forms, and look out for surprising conditions on their course.
Thus, the common workstyles they should need to have are creativity, integrity, self-control and attention to detail.
Learn more about postal mail service carriers.
https://brainly.com/question/23310980
#SPJ1
Answer:
1456
Explanation:
A car started its journey at point A. After 30 seconds, the car had reached point B. The car stops at point B for 10 seconds. Then, the car turned around and arrived at point A after 15 seconds. The car stopped at point A for 20 seconds. The car then went on his way and get to the point C after 10 seconds. Find the velocity from 30 to 40s
Since the displacement is equal to zero, the velocity from 30 to 40s will also be zero.
VelocityVelocity is the distance travelled by a body in a specific direction per time taken. It is measured in meter per second. That is, m/s
Given that a car started its journey at point A. After 30 seconds, the car had reached point B. The car stops at point B for 10 seconds. Then, the car turned around and arrived at point A after 15 seconds. The car stopped at point A for 20 seconds. The car then went on his way and get to the point C after 10 seconds.
To find the velocity from 30 to 40s, we must realize that velocity can also be defined as;
Velocity = displacement / time
The displacement from point A to B and back to A is equal to zero.
Therefore, The velocity from 30 to 40s is also zero.
Learn more about Velocity here: https://brainly.com/question/25749514
#SPJ1
the yacht shown below has a mass of 8300kg. determine its weight in air [ Acceleration due to gravity, g = 10 N kg¹
[tex]w = mg [/tex]
Answer:
83000kg
Explanation:
mass=8300kg
g=10
w=mg
8300×10=83000kg
How are distance and displacement related?
Answer: They both give us a notion about the position of an object
Explanation: