52 times 20% minus 52

Answers

Answer 1

The result for this percentage question is deducting 52 from 10.4 is -41.6.

How much is a percentage?

A rate, number, or amount in each hundred is referred to as a percentage. Although "pct," "pct," and occasionally "pc" are also used as abbreviations, the percent symbol "%" is most usually used to denote it.

A % lacks a measurement unit and is a dimensionless (pure) number

What does measurement unit mean?

An accepted quantity that is used to represent a physical quantity is called a measurement unit. The factor used to represent how many instances of a given physical property there are is the standard quantity of that property.

You may get 10.4 by multiplying 52 by 0.2 (20% as a decimal),

20/100=0.2

which is 52 times 20%.

The result of deducting 52 from 10.4 is -41.6.

Complete question given below:

To know more about percentage visit:

brainly.com/question/31060287

#SPJ1

What is the value of 52 times 20% minus 52?


Related Questions

Let A and B be square matrices. Show that even though AB and BA may not be equal, it is always true that det AB = det BA

Answers

Since these matrices have the same eigenvalues, their products will be the same. Therefore, det AB = det BA

To show that det AB = det BA, we can use the fact that the determinant of a product of matrices is equal to the product of the determinants of those matrices. That is, det AB = det A det B and det BA = det B det A.

Now, let's consider the matrices AB and BA. Even though they may not be equal, they have the same set of eigenvalues. This means that the determinant of AB and the determinant of BA have the same factors. We can see this by considering the characteristic polynomials of these matrices, which are the same up to a sign.

Therefore, we can write det AB as the product of the eigenvalues of AB, and det BA as the product of the eigenvalues of BA. Since these square matrices have the same eigenvalues, their products will be the same. Thus, det AB = det BA.

Learn more about square matrix: https://brainly.com/question/13179750

#SPJ11

estimate the number of peas that fit inside a 1 gallon jar

Answers

Our estimate is that around 40,514 peas can fit inside a 1 gallon jar under these assumptions.

The number of peas that fit inside a 1 gallon jar can vary depending on a few factors, such as the size of the peas, the packing density, and the shape of the jar. However, we can make a rough estimate based on some assumptions and calculations.

Assuming that the peas are spherical and have an average diameter of 0.5 cm, we can calculate the volume of each pea using the formula for the volume of a sphere:

[tex]V = (4/3)πr^3[/tex]

where r is the radius of the sphere, which is half the diameter. Thus, for a pea with a diameter of 0.5 cm, the radius is 0.25 cm, and the volume is:

V = (4/3)π(0.25 cm)^3 ≈ 0.0654 [tex]cm^3[/tex]

Next, we need to estimate the volume of the 1 gallon jar. One gallon is equal to 3.78541 liters, or 3785.41 cubic centimeters (cc). However, the jar may not be filled to its full volume due to its shape and the presence of the peas, so we need to make an assumption about the packing density. Let's assume that the peas occupy 70% of the volume of the jar, leaving 30% as empty space. This gives us an estimated volume of:

V_jar = 0.7(3785.41 cc) ≈ 2650.79 cc

To find the number of peas that fit inside the jar, we can divide the estimated volume of the jar by the volume of each pea:

N = V_jar / V ≈ 40,514

Therefore, our estimate is that around 40,514 peas can fit inside a 1 gallon jar under these assumptions. It's important to note that this is only an approximation, and the actual number may vary depending on the factors mentioned earlier.

To know more about gallon refer here:

https://brainly.com/question/19638640

#SPJ11

The distribution of blood types for 100 Americans is Isted in the table. If one donor is selected at random, find the probability of selecting a person with blood type AB Blood Type 0 0-A+ A- B+BAB AB- Number 37 6 34 6 10 2 4A. 001B. 0.10C. 0.99D. 0.05

Answers

To find the probability of selecting a person with blood type AB from a random distribution of 100 Americans, some steps need to be followed.


Steps are:
Step 1: Identify the total number of people (100 Americans in this case) and the number of people with blood type AB from the table (AB+ and AB-).

Step 2: Add the number of people with AB+ and AB- blood types:
AB+ (2) + AB- (4) = 6

Step 3: Calculate the probability by dividing the number of people with blood type AB (6) by the total number of people (100):
Probability = (Number of AB blood types) / (Total number of people)
Probability = 6 / 100

Step 4: Simplify the fraction to get the final probability:
Probability = 0.06

So, the probability of selecting a person with blood type AB from a random distribution of 100 Americans is 0.06 or 6%.

To learn more about “probability” refer to the https://brainly.com/question/13604758

#SPJ11

In order for the characteristics of a sample to be generalized to the entire population, the sample should be: O symbolic of the population O atypical of the population representative of the population illustrative of the population

Answers

In order for the characteristics of a sample to be generalized to the entire population, the sample should be option (c)  representative of the population

For a sample to be able to generalize to the entire population, it must be selected in such a way that it accurately reflects the characteristics of the population from which it was drawn. This means that the sample should be representative of the population in terms of the relevant characteristics that are being studied.

If the sample is not representative of the population, then any conclusions drawn from the sample may not be applicable to the larger population, which can lead to inaccurate or misleading results.

Therefore, it is important to use proper sampling methods to ensure that the sample is representative of the population. This can be done through techniques such as random sampling or stratified sampling, which aim to select a sample that accurately reflects the population characteristics of interest.

Therefore, the correct option is (c) representative of the population.

Learn more about sampling methods here

brainly.com/question/12902833

#SPJ4

Write the differential equation y4 - 27y' = x2 + x in the form L (y) = g(x), where L is a linear differential operator with constant coefficients. If possible, factor L.A. D(D+3) (D2 - 3D+9)y=x2+xB. D(D-3) (D2+3D+9)y=x2+xC. (D-3) (D+3) (D2+9)y=x2+xD. D(D+3) (D2 - 6D+9)y=x2+xE. D(D-3) (D2+6D+9)y=x2+x

Answers

The differential equation y4 - 27y' = x2 + x in the form L (y) = g(x) is D(D - 3)(D^2 + 3D + 9)y = x^2 + x. So, the answer is option B.

Explanation:

The given differential equation is y4 - 27y' = x2 + x.

To write it in the form L(y) = g(x), where L is a linear differential operator with constant coefficients, we need to express y4 and y' in terms of differential operators.

We can write y4 as (D^4)y, where D is the differential operator d/dx.

To express y' in terms of differential operators, we can use the product rule:

y' = dy/dx = (D)(y)

Therefore, the given differential equation can be written as:

(D^4)y - 27(D)y = x^2 + x

Now, we need to factor the linear differential operator L = (D^4) - 27D.

We can factor out D from the second term:

L = D(D^3 - 27)

Next, we can factor the cubic polynomial D^3 - 27 using the difference of cubes formula:

D^3 - 27 = (D - 3)(D^2 + 3D + 9)

Therefore, we can express L as:

L = D(D - 3)(D^2 + 3D + 9)

Finally, we can write the differential equation in the desired form:

D(D - 3)(D^2 + 3D + 9)y = x^2 + x

So, the answer is option B.

Know more about the linear differential operator click here:

https://brainly.com/question/31476689

#SPJ11

Find the Taylor series for f centered at 8 if f^(n) (8) = (-1)^n n!/4^n(n + 2) What is the radius of convergence R of the Taylor series?

Answers

The radius of convergence R, we use the Ratio Test: R = lim (n→∞) |(aₙ₊₁ / aₙ)|.

The Taylor series for f centered at 8 is given by the formula:

Σ[(-1)ⁿ * (n! * (x-8)ⁿ) / (4ⁿ * (n+2)ⁿ)], where n ranges from 0 to infinity.

The radius of convergence R is 1/4.

To find the Taylor series, we use the general formula for Taylor series expansion:

Σ[(fⁿ(8) * (x-8)ⁿ) / n!], where n ranges from 0 to infinity.

Given that fⁿ(8) = (-1)ⁿ * n! / 4ⁿ * (n+2)ⁿ, we substitute this into the Taylor series formula:

Σ[((-1)ⁿ * n! / 4ⁿ * (n+2)ⁿ) * (x-8)ⁿ / n!] = Σ[(-1)ⁿ * (x-8)ⁿ / (4ⁿ * (n+2)ⁿ)].

To find the radius of convergence R, we use the Ratio Test:

R = lim (n→∞) |(aₙ₊₁ / aₙ)|.

To know more about Taylor series click on below link:

https://brainly.com/question/29733106#

#SPJ11

SERIOUS HELP 9. If AXYZ-ARST, find RS.
5r - 3
X
Y
60
Z
T
R
40
A
S
3x + 2

Answers

Answer:

  RS = 38

Step-by-step explanation:

Given ∆XYZ ~ ∆RST with XY=5x-3, XZ=60, RS=3x+2, RT=40, you want the length of RS.

Similar triangles

Corresponding sides of similar triangles have the same ratios:

  XY/XZ = RS/RT

  (5x -3)/60 = (3x +2)/40 . . . substitute given lengths

  2(5x -3) = 3(3x +2) . . . . . . . multiply by 120

  10x -6 = 9x +6 . . . . . . . . . . . eliminate parentheses

  x = 12 . . . . . . . . . . . . . . . add 6-9x to both sides

Side RS

Using this value of x we can find RS:

  RS = 3x +2

  RS = 3(12) +2

  RS = 38

__

Additional comment

The value of XY is 5(12)-3 = 57, and the above ratio equation becomes ...

  57/60 = 38/40 . . . . . both ratios reduce to 19/20.

for h ( x , y ) = sin − 1 ( x 2 y 2 − 16 ) h(x,y)=sin-1(x2 y2-16) the domain of the function is the area between two circles. show your answers to 4 decimals if necessary.

Answers

The domain of the function [tex]h(x, y) = sin^{-1} (x^{2}+ y^{2} - 16)[/tex] is the area between two circles with radii √15 and √17, centered at the origin. The larger circle has a radius of √17 and the smaller circle has a radius of √15.

For the given function [tex]h(x, y) = sin^{-1} (x^{2}+ y^{2} - 16)[/tex] , we need to determine the domain of the function, which is the area between two circles.  To find the domain, we need to consider the range of the arcsine function, which is between -π/2 and π/2.

This means that the expression inside the arcsine function, [tex](x^{2} + y^{2} - 16)[/tex] , must be between -1 and 1.
[tex]-1 \leq x^{2}+ y^{2}- 16 \leq 1[/tex]

Adding 16 to all sides of the inequality, we get:
[tex]15 \leq x^{2} + y^{2}\leq 17[/tex]

This means that the domain of the function is the area between two circles with radii √15 and √17, centered at the origin.  The larger circle has a radius of √17, which is the maximum value of [tex]x^{2}+ y^{2}[/tex] in the domain of the function. To see why, assume that [tex]x^{2} + y^{2} > \sqrt{17}[/tex]. Then,

[tex]sin^{-1} (x^{2} + y^{2}- 16) > sin^{-1} (\sqrt{17}- 16) > \pi /2[/tex]
which is outside the range of the arcsine function. Therefore, the maximum radius of the larger circle is √17.

Similarly, the smaller circle has a radius of √15, which is the minimum value of [tex]x^{2}+ y^{2}[/tex] in the domain of the function. To see why, assume that[tex]x^{2}+ y^{2} < \sqrt{15}[/tex]. Then,

[tex]sin^{-1}(x^{2}+ y^{2} - 16) < sin^{-1}(\sqrt{15}- 16) < -\pi /2[/tex]
which is also outside the range of the arcsine function. Therefore, the minimum radius of the smaller circle is √15.

In conclusion, the domain of the function [tex]h(x, y) = sin^{-1} (x^{2}+ y^{2} - 16)[/tex]  is the area between two circles with radii √15 and √17, centered at the origin. The larger circle has a radius of √17 and the smaller circle has a radius of √15.

To know more about function refer here:

https://brainly.com/question/12431044#

#SPJ11

Complete Question:

For [tex]h(x, y) = sin^{-1} (x^{2}+ y^{2} - 16)[/tex]

the domain of the function is the area between two circles.

The larger circle has a radius of __.

The smaller circle has a radius of __.

Which expression is equivalent to 32 + 12?
O4(8 + 3)
O 8(4 + 3)
O 4(8+12)
O 3(11+4)

Answers

Answer:

4(8+3)

Step-by-step explanation:

Because if you break 4(8+3) down by using the FOIL method, it would be 4(8)+4(3) which is equal to 32+12.

The coordinate of an object is given as a function of time by 0 = 7t-3t2, where is in radians and t is in seconds. Its angular velocity att = 3 sis: O-11 rad/s 0 -3.7 rad/s O 1.0 rad/s O 3.7 rad/s O 11 rad/s

Answers

If the coordinate of an object is given as a function of time by 0 = 7t-3t2, where is in radians and t is in seconds, The angular velocity at t = 3 s is -11 rad/s. The answer is (a) -11 rad/s.

The angular velocity is the derivative of the position function with respect to time. Therefore, we need to find the derivative of the given function:

θ = 7t - 3t^2

ω = dθ/dt = 7 - 6t

Now we can find the angular velocity at t = 3 s by plugging in t = 3 into the equation for ω:

ω = 7 - 6(3) = -11

Therefore, The answer is (a) -11 rad/s.

To learn more about velocity click on,

https://brainly.com/question/31413395

#SPJ4

If the coordinate of an object is given as a function of time by 0 = 7t-3t2, where is in radians and t is in seconds, The angular velocity at t = 3 s is -11 rad/s. The answer is (a) -11 rad/s.

The angular velocity is the derivative of the position function with respect to time. Therefore, we need to find the derivative of the given function:

θ = 7t - 3t^2

ω = dθ/dt = 7 - 6t

Now we can find the angular velocity at t = 3 s by plugging in t = 3 into the equation for ω:

ω = 7 - 6(3) = -11

Therefore, The answer is (a) -11 rad/s.

To learn more about velocity click on,

https://brainly.com/question/31413395

#SPJ4

assume that z=f(w), w=g(x,y), x=2r3−s2, and y=res. if gx(2,1)=−2, gy(2,1)=3, f′(7)=−1, and g(2,1)=7, find the following. ∂z∂r|r=1,s=0

Answers

The value of ∂z/∂r at r=1 and s=0 is -9.

To find ∂z/∂r at r=1 and s=0, we need to use the chain rule:

∂z/∂r = ∂z/∂w * ∂w/∂x * ∂x/∂r

First, let's find ∂z/∂w:

f'(w) = dz/dw

Since f'(7) = -1, we know that dz/dw = -1 when w = 7.

Next, let's find ∂w/∂x and ∂x/∂r:

[tex]w = g(x,y) = g(2r^3 - s^2, res)[/tex]

∂w/∂x = ∂g/∂x = g_x = -2 (given)

∂x/∂r = [tex]6r^2[/tex](chain rule)

Now we can put it all together:

∂z/∂r = ∂z/∂w * ∂w/∂x * ∂x/∂r
    [tex]= (-1) * (-2) * 6r^2[/tex]
      [tex]= 12r^2[/tex]
So, at r=1 and s=0, we have:

[tex]∂z/∂r|r=1,s=0 = 12(1)^2 = 12[/tex]
To find ∂z/∂r at r=1 and s=0, we need to apply the chain rule. First, let's find the derivatives of x and y with respect to r and s:

∂x/∂r = 6r, ∂x/∂s = -2s
[tex]∂y/∂r = e^s, ∂y/∂s = re^s[/tex]

Now, we'll use the chain rule to find ∂z/∂r:

∂z/∂r = ∂z/∂w * (∂w/∂x * ∂x/∂r + ∂w/∂y * ∂y/∂r)

We have the following information:

gx(2,1) = ∂w/∂x = -2
gy(2,1) = ∂w/∂y = 3
f'(7) = ∂z/∂w = -1
g(2,1) = 7

Now, substitute the values for r=1 and s=0:

∂x/∂r = 6(1) = 6
∂y/∂r = e^(0) = 1

Plug in the given values:

∂z/∂r = (-1) * ((-2) * 6 + 3 * 1)

Calculate the result:

∂z/∂r = (-1) * (9)

∂z/∂r = -9

To learn more about derivatives visit;

brainly.com/question/30365299

#SPJ11

find the differential dy of the function y=2x4 54−4x.

Answers

The differential dy of the function y = 2x^4 - 54 - 4x is dy = (8x^3 - 4)dx.

How to find the differential?

To find the differential dy of the function y = 2x^4 - 54 - 4x, we first need to differentiate y with respect to x.

Step 1: Identify the terms in the function. The terms are 2x^4, -54, and -4x.

Step 2: Differentiate each term with respect to x.
- For 2x^4, using the power rule (d/dx (x^n) = n*x^(n-1)), we get (4)(2x^3) = 8x^3.
- For -54, since it's a constant, its derivative is 0.
- For -4x, using the power rule, we get (-1)(-4x^0) = -4.

Step 3: Combine the derivatives to get the derivative of the entire function.
dy/dx = 8x^3 - 4.

Step 4: The differential dy is the derivative multiplied by dx.
dy = (8x^3 - 4)dx.

So, the differential dy of the function y = 2x^4 - 54 - 4x is dy = (8x^3 - 4)dx.

Learn more about differentiation

brainly.com/question/24898810

#SPJ11

50 POINTS ANSWER ASAP!!!!!
In a board game, you must roll two 6-sided number cubes. You can only start the game if you roll a 3 on at least one of the number cubes.
[Part A] Make a list of all the different possible outcomes when two number cubes are rolled.
[Part B] What fraction of the possible outcomes is favorable?
[Part C] Suppose you rolled the two number cubes 100 times, would you expect at least one 3 more or less than 34 times? Explain.
I'm a little bad at probabilities

Answers

[Part A] There are 36 possible outcomes when two number cubes are rolled. Here's the list:

1-1, 1-2, 1-3, 1-4, 1-5, 1-6
2-1, 2-2, 2-3, 2-4, 2-5, 2-6
3-1, 3-2, 3-3, 3-4, 3-5, 3-6
4-1, 4-2, 4-3, 4-4, 4-5, 4-6
5-1, 5-2, 5-3, 5-4, 5-5, 5-6
6-1, 6-2, 6-3, 6-4, 6-5, 6-6

[Part B] There are 11 favorable outcomes (3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 1-3, 2-3, 4-3, 5-3, 6-3) out of 36 possible outcomes. So the fraction of the possible outcomes that is favorable is 11/36.

[Part C] The probability of rolling at least one 3 in a single roll is 11/36. So the probability of not rolling any 3s in 100 rolls is (25/36)^100. Using a calculator, we get that this probability is about 0.0002. Therefore, we would expect to roll at least one 3 more than 34 times.

Suppose a category of runners are known to run a marathon in an average of 142 minutes with a standard deviation of 8 minutes. Samples of size n = 40 are taken. Let X = the average length of time, in minutes, it takes a sample of size n=40 runners in the given category to run a marathon Find the value that is 1.5 standard deviations above the expected value of the sample mean (ie, 1.5 standard deviations above the mean of the means). Round your answer to 2 decimal places.

Answers

The answer is 143.90. We used the formula for the standard error of the mean to find the expected value of the sample mean, then added 1.5 standard deviations to that value to find the answer.

To begin, we can use the formula for the standard error of the mean to calculate the expected value of the sample mean. The formula is as follows:

standard error of the mean = standard deviation / √(sample size)

In this case, the standard deviation is 8 minutes and the sample size is 40, so we can plug those values into the formula:

standard error of the mean = 8 / √(40)
standard error of the mean = 1.2649

Next, we can use the formula for the mean of the means to find the expected value of the sample mean:
mean of the means = average

In this case, the average is given as 142 minutes, so the mean of the means is also 142 minutes.

Now we can find the value that is 1.5 standard deviations above the expected value of the sample mean:

1.5 standard deviations = 1.5 * standard error of the mean
1.5 standard deviations = 1.5 * 1.2649
1.5 standard deviations = 1.8974

Finally, we add this value to the mean of the means to find the answer:

[tex]\bar{X} + 1.5\; standard \; deviations = 142 + 1.8974[/tex]


[tex]\bar{X} + 1.5 \;standard \;deviations = 143.8974[/tex]

Rounding to 2 decimal places, the answer is 143.90.

In summary, we used the formula for the standard error of the mean to find the expected value of the sample mean, then added 1.5 standard deviations to that value to find the answer. This calculation helps us understand the range of values we might expect to see in a sample of runners in this category.

To know more about standard deviations refer here:

https://brainly.com/question/23907081#

#SPJ11

At West High School, 10% of the students participate in
sports. A student wants to simulate the act of randomly
selecting 20 students and counting the number of
students in the sample who participate in sports. The
student assigns the digits to the outcomes.
0 student participates in sports
=
1-9 student does not participate in sports
How can a random number table be used to simulate
one trial of this situation?
O Select a row from the random number table. Count
the number of digits until you find 20 zeros.
O Select a row from the random number table. Count
the number of digits until you find 10 zeros.
O Select a row from the random number table. Read 20
single digits. Count the number of digits that are
zeros.
O Select a row from the random number table. Read 10
single digits. Count the number of digits that are
zeros.

Answers

Option C is the correct answer: Select a row from the random number table. Read 20 single digits. Count the number of digits that are zeros.

How to use Number Table?

Here's how you can use a random number table to simulate one trial of this situation:

Choose a random number table that has enough rows and columns to accommodate the number of digits you need. For this problem, you need 20 digits, so make sure your table has at least 20 columns.Randomly select a row from the table to use for your trial.Read the first digit in the row. If the digit is 0, count it as a student who participates in sports. If the digit is 1-9, count it as a student who does not participate in sports.Repeat step 3 for the next 19 digits in the row, until you have counted the number of students who participate in sports in your sample of 20 students.Record the number of students who participate in sports in your sample.Repeat steps 2-5 for as many trials as you need to get a sense of the distribution of outcomes.

By using a random number table, you can simulate this situation and get a sense of the likelihood of different outcomes. Keep in mind that the more trials you run, the more accurate your estimate of the actual distribution will be.

Learn more about number table here: https://brainly.com/question/30242913

#SPJ1

8.7. let s = {x ∈ z : ∃y ∈ z,x = 24y}, and t = {x ∈ z : ∃y,z ∈ z,x = 4y∧ x = 6z}. prove that s 6= t.

Answers

since we have found an element (48) in S that is not in T, we can conclude that S is not equal to T.

To prove that S is not equal to T, we need to show that there I an element in either S or T that is not in the other set.

Let's first look at the elements in S. We know that S is the set of all integers that can be expressed as 24 times some other integer. So, for example, 24, 48, 72, -24, -48, -72, etc. are all in S.

Now, let's look at the elements in T. We know that T is the set of all integers that can be expressed as 4 times some integer and 6 times some integer. We can find some examples of numbers in T by finding the multiples of the LCM of 4 and 6, which is 12. So, for example, 12, 24, 36, -12, -24, -36, etc. are all in T.

Now, let's consider the number 48. We know that 48 is in S, since it can be expressed as 24 times 2. However, 48 is not in T, since it cannot be expressed as 4 times some integer and 6 times some integer. This is because the only common multiple of 4 and 6 is 12, and 48 is not a multiple of 12.

Learn more about S: https://brainly.com/question/14453211

#SPJ11

the diagram shows a bridge that that can be lifted to allow ships to pass below. what is the distance AB when the bridge is lifted to the position shown in the diagram (note that the bridge divides exactly in half when it lifts open)​

Answers

Therefore, the distance AB when the bridge is lifted to the position shown in the diagram is approximately 17.32 units.

What is distance?

Distance refers to the numerical measurement of the amount of space between two points, objects, or locations. It is a scalar quantity that has magnitude but no direction, and it is usually expressed in units such as meters, kilometers, miles, or feet. Distance can be measured in a straight line, or it can refer to the length of a path or route taken to travel from one point to another. It is an important concept in mathematics, physics, and other fields, and it has many practical applications in daily life, such as in navigation, transportation, and sports.

Here,

In the diagram, we can see that the bridge is divided into two halves and pivots around point B. When the bridge is lifted, it forms a right triangle with legs AB and BC, and hypotenuse AC. Since the bridge divides exactly in half, we can see that angle BCD is a right angle and angle ACD is equal to 30 degrees.

Using trigonometry, we can find the length of AB as follows:

tan(30) = AB/BC

tan(30) = AB/30

AB = 30 * tan(30)

AB ≈ 17.32

To know more about distance,

https://brainly.com/question/15172156

#SPJ1

A cylinder just fits inside a hollow cube with sides of length mcm

Answers

The value of k is 4 when volume of cylinder is [tex]\pi[/tex] .

To solve this problem, we need to use the formulas for the volumes of a cylinder and a cube.

The volume of a cylinder is given by V_cylinder = π[tex]r^{2}[/tex]h, where r is the radius and h is the height.

The volume of a cube is given by V_cube = [tex]s^{3}[/tex], where s is the length of a side.

In this problem, the cylinder just fits inside the cube, which means that the diameter of the cylinder is equal to the length of a side of the cube, or 2r = m. Therefore, the radius of the cylinder is m/2 cm, and the height of the cylinder is m cm.

Substituting these values into the formula for the volume of the cylinder, we get:

V_cylinder = π[tex](m/2)^{2}[/tex](m) = π[tex]m^{3/4}[/tex]

Substituting the value for the volume of the cylinder into the given ratio, we get:

k : π = V_cube : V_cylinder = [tex]m^{3}[/tex] : (π[tex]m^{3/4}[/tex] ) = 4 : π

Therefore, the value of k is 4.

Correct Question:

A cylinder just fits inside a hollow cube with sides of length m cm. The radius of the cylinder is m/2 cm. The height of the cylinder is m cm. The ratio of the volume of the cube to the volume of the cylinder is given by volume of cube : volume of cylinder = k : [tex]\pi[/tex], where k is a number. Find the value of k.

To learn more about volume here:

https://brainly.com/question/30403969

#SPJ1

A rectangular floor has a length of 16 3/4 feet and a width of 15 1/2 feet. What is the area of the floor ?

Answers

Answer:

To find the area of the rectangular floor, we need to multiply its length by its width.

First, we need to convert the mixed numbers to improper fractions.

16 3/4 = (4 x 16 + 3)/4 = 67/4

15 1/2 = (2 x 15 + 1)/2 = 31/2

So, the area of the floor is:

67/4 x 31/2 = (67 x 31)/(4 x 2) = 2077/8 square feet

Therefore, the area of the floor is 2077/8 square feet.

find the infinite sum (if it exists): ∑i=0[infinity]10⋅(9)i if the sum does not exists, type dne in the answer blank.

Answers

The infinite sum ∑i=0[infinity]10⋅(9)i does not exist(DNE).

To determine whether the infinite sum ∑i=0[infinity]10⋅(9)i exists, we can use the formula for the sum of an infinite geometric series, which is given by:

S = a/(1-r)

where a is the first term of the series and r is the common ratio between consecutive terms.

In this case, a = 10 and r = 9. Substituting these values into the formula, we get:

S = 10/(1-9) = -10

Since the denominator of the formula is negative, the infinite sum diverges to negative infinity. This means that the sum does not exist in the traditional sense, since the terms of the series do not approach a finite value as the number of terms increases.

Therefore, we can conclude that the infinite sum ∑i=0[infinity]10⋅(9)i does not exist (DNE).

Know more about infinite sum here:

https://brainly.com/question/30763189

#SPJ11

An electrician 498656 volts box where found valid 6768 12 to square found in in well done and 83 865% did not get how many votes of the literated in all

Answers

The total number of votes registered in all is 571289.

To find out how many votes were registered in all, we need to add the number of valid votes, invalid votes, and the number of people who did not cast their votes.

So, the total number of votes registered in all is:

The problem asks to find out how many votes were registered in all in an election given the number of valid votes, invalid votes, and the number of people who did not cast their votes.

We can start by adding the number of valid votes and invalid votes because those are the votes that were cast, regardless of whether they were valid or not.

This gives us:

498656 (valid votes) + 6768 (invalid votes)

= 505424 votes.

498656 (valid votes) + 6768 (invalid votes) + 83865 (people who did not vote)

= 571289 votes.

The total number of votes registered in all is 571289

However, we also need to add the number of people who did not cast their votes, which is given as 83865.

Therefore, the total number of votes registered in all is:

505424 (valid and invalid votes) + 83865 (people who did not vote)

= 571289 votes.

For similar question on votes registered:

brainly.com/question/17045370

#SPJ11

find an equation of the tangent line to the curve y = √ 3 x 2 that is parallel to the line x − 2y = 1

Answers

The equation of the tangent line is y = (x/2) + (√3/2).

How to find the equation of the tangent line?

To find an equation of the tangent line to the curve y = √(3x²) that is parallel to the line x - 2y = 1, we need to follow these steps:

Rewrite the curve y = √(3x²) as y = ±√(3)x.Take the derivative of y with respect to x: dy/dx = ±√3.Since the tangent line is parallel to the given line x - 2y = 1, its slope is also 1/2. Therefore, we want to find the value of x where dy/dx = 1/2.Set √3 = 1/2 and solve for x: x = (√3)/2.Substitute x = (√3)/2 into the original equation y = ±√(3)x to get the corresponding y-value: y = ±√3/2.Choose one of the two possible values of y and use the point-slope form of the equation of a line to write the equation of the tangent line: y - y1 = m(x - x1), where m is the slope and (x1, y1) is the point on the curve where the tangent line touches it. For example, if we choose y = √3/2, then the point on the curve is (x1, y1) = ((√3)/2, √3/2), and the slope is m = 1/2. Substituting these values, we get:

        y - √3/2 = (1/2)(x - √3/2)

        y = (1/2)x + (√3/4)

Therefore, the equation of the tangent line to the curve y = √(3x²) that is parallel to the line x - 2y = 1 is y = (1/2)x + (√3/4).

Learn more about Tangent line

brainly.com/question/31326507

#SPJ11

Find the surface area of the region Slon the plane z=2x+3y such that 0 ≤x≤ 25 and 0 ≤ y ≤ 15 by finding a parameterization of the surface and then calculating the surface area.

Answers

The surface area of the region S is 75√14.

How to find the surface area of the region?

Find the surface area of the region Slon the plane z=2x+3y such that 0 ≤x≤ 25 and 0 ≤ y ≤ 15 by finding a parameterization of the surface and then calculating the surface area.

The region S is the part of the plane z = 2x + 3y that lies in the rectangular region 0 ≤ x ≤ 25 and 0 ≤ y ≤ 15. To find the surface area of S, we need to parameterize the surface and then calculate the surface area using the formula:

S =∫∫√[tex](1 + (fx)^2 + (fy)^2)dA[/tex]

where fx and fy are the partial derivatives of z with respect to x and y, respectively, evaluated at the point (x,y).

To parameterize the surface, we can use the following equations:

x = u

y = v

z = 2u + 3v

where (u,v) ∈ R² is a point in the rectangular region 0 ≤ u ≤ 25 and 0 ≤ v ≤ 15.

To calculate the surface area, we need to find the partial derivatives fx and fy:

fx = 2

fy = 3

Then, the surface area of S is given by:

S = ∫∫√[tex](1 + (fx)^2 + (fy)^2)dA[/tex]

= ∫∫√[tex](1 + 2^2 + 3^2)dudv[/tex]

= ∫∫√(1 + 13)dudv

= ∫₀²⁵ ∫₀¹⁵ √14 dudv

= √14 ∫₀²⁵ ∫₀¹⁵ 1 dudv

= √14 ∫₀²⁵ v|₀¹⁵ du

= √14 ∫₀¹⁵ 25 dv

= √14 * 25 * 15

= 75√14

Therefore, the surface area of the region S is 75√14.

Learn more about  surface area

brainly.com/question/16560289

#SPJ11

The slope of a curve is equal to y divided by 4 more than x^2 at any point (x,y) on the curve.
A) Find a differential equation that represents this:
I got dy/dx=y/(4+x^2)
B) Solve this differential equation:
I got y=sqrt((x^4+8x^2+16)/2x)+C
Here is where I really need help!
C) Suppose its known that as x goes to infinity on the curve, y goes to 1. Find the equation for the curve by using part B and determining the constant. Explain all reasoning.

Answers

We used the fact that y goes to 1 as x goes to infinity to determine the value of the constant C in the equation we got from part B. This allowed us to find the equation for the curve.

C) To find the equation for the curve given the condition that as x goes to infinity, y goes to 1, we need to use the solution obtained in part B and determine the constant C. Here's how to do it:

As x approaches infinity, we have:
1 = sqrt((x^4 + 8x^2 + 16) / (2x)) + C

Since x is going to infinity, we can consider x^4 to be dominant over the other terms in the numerator, so:
1 ≈ sqrt((x^4) / (2x)) + C

Simplifying the above expression, we get:
1 ≈ sqrt(x^3 / 2) + C

As x goes to infinity, the term sqrt(x^3 / 2) also goes to infinity. For the equation to hold true, C must be equal to negative infinity. However, since C is a constant and not a variable, we cannot consider it to be equal to negative infinity.

Thus, there seems to be a mistake in the solution obtained in part B, as it does not satisfy the given condition in part C. Please double-check the solution and steps taken in part B to ensure the correctness of the answer.

Learn more about variables here: brainly.com/question/2466865

#SPJ11

use an integral to estimate the sum from∑ i =1 to 10000 √i

Answers

The fact that the sum can be approximated by an integral. we can approximate the sum as the area under the curve y=√x from x=1 to x=10000. This can be written as: ∫1^10000 √x dx

Using integration rules, we can evaluate this integral to get:
(2/3) * (10000^(3/2) - 1^(3/2))
This evaluates to approximately 66663.33. Therefore, an estimate for the sum ∑ i=1 to 10000 √i is 66663.33.

In mathematics, integrals are continuous combinations of numbers used to calculate areas, volumes, and their dimensions. Integration, which is the process of calculating compounds, is one of the two main operations of computation, [a] the other being derivative. Integration was designed as a way to solve math and physics problems like finding the area under a curve or determining velocity. Today, integration is widely used in many fields of science.

To estimate the sum of ∑ from i=1 to 10000 of √i using an integral, we'll approximate the sum with the integral of the function f(x) = √x from 1 to 10000.

The integral can be written as:

∫(from 1 to 10000) √x dx

To solve this integral, we first find the antiderivative of √x:

Antiderivative of √x = (2/3)x^(3/2)

Now, we'll evaluate the antiderivative at limits 1 and 10000:

(2/3)(10000^(3/2)) - (2/3)(1^(3/2))

(2/3)(100000000) - (2/3)

= (200000000/3) - (2/3)

= 199999998/3

Thus, the integral estimate of the sum from i=1 to 10000 of √i is approximately 199999998/3.

Learn more about Integral:

brainly.com/question/18125359

#SPJ11

Chloe will role a numbered die and flip a coin for a probability experiment. The faces of the numbered die are labeled 1 through 6. The coin can land on heads or tails. If Chloe rolls the number cube twice and flips the coin once, how many possible outcomes are there?

Answers

Answer:If Chloe rolls the number cube twice and flips the coin once, there are 2 possible outcomes for the coin flip (heads or tails) and 6 possible outcomes for each roll of the number cube.

To find the total number of possible outcomes, we can use the multiplication principle of counting. The total number of possible outcomes is given by the product of the number of outcomes for each event.

Therefore, the total number of possible outcomes is:

2 x 6 x 6 = 72

So, there are 72 possible outcomes when Chloe rolls the number cube twice and flips the coin once.

Step-by-step explanation:

Put the domestic gross income​ ($ millions) in order from smallest to largest.
Find the median by averaging the two middle numbers. Interpret the median in context. Select the correct choice below and fill in the answer box within your choice.
​(Type an integer or a decimal. Do not​ round.)
A.The median is
nothing
million dollars. This means that about​ 25% of these 6 Marvel movies made more than this much money.

Answers

By averaging the two middle numbers, we can determine that the median is $75 million.

Based on the information provided, we know that there are six Marvel movies and we need to put their domestic gross income in order from smallest to largest. However, we're also given a specific piece of information about the median, which is that it's a certain amount of million dollars and that about 25% of the movies made more than this amount.

To start, let's define what the median is.

The median is a measure of central tendency that represents the middle value in a set of data. In this case, we have six Marvel movies, so the median would be the third value when the movies are arranged in order from smallest to largest. If we arrange the movies by their domestic gross income, we can determine the median and use that information to put them in order.

So, let's say the six Marvel movies are:

Movie A: $50 million
Movie B: $60 million
Movie C: $70 million
Movie D: $80 million
Movie E: $90 million
Movie F: $100 million

Using these values, we can determine that the median is $75 million. This means that about 25% of the movies made more than $75 million and the remaining 75% made less than $75 million. To put the movies in order from smallest to largest, we can use this information and arrange them as follows:

Movie A: $50 million
Movie B: $60 million
Movie C: $70 million
Movie D: $80 million
Movie E: $90 million
Movie F: $100 million

So, the movies are now arranged in order from smallest to largest based on their domestic gross income. This information can be useful for analyzing trends and making predictions about future movie releases.

To know more about median refer here:

https://brainly.com/question/21396105

#SPJ11

AC + F = BC +D

Solve for C

Answers

The value of C in the equation is C = (D - F)/(A - B).

We have,

We need to isolate the variable C on one side of the equation, which we can do by moving all the other terms to the other side:

So,

AC + F = BC + D

Subtract BC from both sides:

AC - BC + F = D

Factor out C on the left-hand side:

C(A - B) + F = D

Subtract F from both sides:

C(A - B) = D - F

Divide both sides by (A - B):

C = (D - F)/(A - B)

Therefore,

The value of C in the equation is C = (D - F)/(A - B)

Learn more about equations here:

https://brainly.com/question/17194269

#SPJ1

find the length of the arc formed by y=1/8 (1x^2-8ln(x)) from x = 2 to x = 8

Answers

The length of the arc formed by using Simpson's rule by y=1/8 (1x^2-8ln(x)) from x = 2 to x = 8 is approximately 8.386.

To find the length of the arc formed by y=1/8 (1x^2-8ln(x)) from x = 2 to x = 8, we need to use the formula for arc length:

L = ∫a to b sqrt[1 + (dy/dx)^2] dx

First, let's find dy/dx:

y = 1/8 (x^2-8ln(x))
dy/dx = 1/4 x - 2/x

Now, let's plug in the values for a and b:

a = 2
b = 8

Now we can find the arc length:

L = ∫2 to 8 sqrt[1 + (dy/dx)^2] dx
L = ∫2 to 8 sqrt[1 + (1/16 x^2 - 1/x + 4) dx
L = ∫2 to 8 sqrt[1/16 x^2 + 1/x + 5] dx

This integral is not easy to solve, so we can use a numerical method such as Simpson's rule to approximate the value of the integral.

Using Simpson's rule with n=4 (subdividing the interval [2,8] into 4 equal subintervals), we get:

L ≈ 8.386


To find the length of the arc formed by the curve y = 1/8(1x^2 - 8ln(x)) from x = 2 to x = 8, we need to use the arc length formula:

Arc length = ∫√(1 + (dy/dx)^2) dx from a to b

First, let's find the derivative dy/dx of y:

y = 1/8(x^2 - 8ln(x))
dy/dx = 1/8(2x - 8/x)

Now, find (dy/dx)^2 and add 1:

(1/8(2x - 8/x))^2 + 1

Next, find the square root of the expression:

√((1/8(2x - 8/x))^2 + 1)

Now, integrate the expression with respect to x from 2 to 8:

Arc length = ∫√((1/8(2x - 8/x))^2 + 1) dx from 2 to 8

Unfortunately, the integral doesn't have a simple closed-form solution, so you would need to use numerical integration methods (e.g., Simpson's rule or trapezoidal rule) or software (like Wolfram Alpha or a graphing calculator) to find the approximate value of the arc length.

Visit here to learn more about Integration:

brainly.com/question/22008756

#SPJ11

answer this math question for 10 points

Answers

Answer:

a, b, and d

Step-by-step explanation:

A, B, and D are Pythagorean triples (the sum of the squares of the first two numbers is equal to the square of the third number).

The Pythagorean theorem states that in a right triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides. Using this theorem, we can check which sets of measures will make a triangle a right triangle.

a) 6, 8, 10
Using the Pythagorean theorem:
6^2 + 8^2 = 36 + 64 = 100
10^2 = 100
Since 6^2 + 8^2 = 10^2, this set of measures will make a right triangle.

b) 12, 16, 20
Using the Pythagorean theorem:
12^2 + 16^2 = 144 + 256 = 400
20^2 = 400
Since 12^2 + 16^2 = 20^2, this set of measures will make a right triangle.

c) 5, 10, 15
Using the Pythagorean theorem:
5^2 + 10^2 = 25 + 100 = 125
15^2 = 225
Since 5^2 + 10^2 is not equal to 15^2, this set of measures will not make a right triangle.

d) 10, 24, 26
Using the Pythagorean theorem:
10^2 + 24^2 = 100 + 576 = 676
26^2 = 676
Since 10^2 + 24^2 = 26^2, this set of measures will make a right triangle.

Therefore, the sets of measures that will make a triangle a right triangle are a) 6, 8, 10 and d) 10, 24, 26. The answer is (a) and (d).
Other Questions
calculate the probability that a randomly selected college will have an in-state tuition of less than $5,000. type all calculations needed to find this probability and your answer in your solution Decision making under risk means the decision maker:A. has no data on which to base his or her decision.B. is risk-averse, avoiding risky investments.C. knows all the risks involved in the decision.D. can estimate decision data with some probability. .This assignment introduces you to the concept of the heap, also referred to as the "free store." Dynamic memory allocation is used for requesting an arbitrarily sized chuck of memory from the system for which you do not know the exact size until the program runs.This assignment uses a rubric. Please review the rubric prior to beginning the assignment to become familiar with the expectations for successful completion.Refer to "CST-211 Technical Report" to complete this assignment.Write a program in C that does the following:Using the command "malloc," dynamically allocate a block of memory capable of storing a user-input quantity of floating point variables.Handle malformed user input appropriately.After allocating the memory, use pointers to step through the array and print the values encountered at each slot.What values do you see? The numbers should seem garbled or random. Explain why this is.Use pointers to step through the array again and, at each location, store a random floating point number between 1 and 10. Verify that this was successful by stepping through the array a third time and printing the numbers from the dynamic array to the screen.De-allocate the array when complete. Which of the following Rh factor combinations could cause agglutination of an infant's red blood cells? O a Mother+, father-, infant+ O b. Mother+, father+, infant- c Mother-, father-infant- O d. Mother-, father+, infant+ a 90:10 nicu alloy is heavily cold worked. it will be used in a structural design that is occasionally subjected to 200c temperatures for as much as 1 hour. do you expect annealing effects to occur? to set a tax rate at the appropriate level to maximize its tax revenues, a government must engage ina. debt-free tax analysis.b. dynamic tax analysis.c. static tax analysis.d. ad valorem tax analysis. If you could switch any state or federal power, which one would you switch and why? tetrodotoxin acts by blocking sodium channels. how does it lead to a loss of excitatory conduction in neurons? what is student centered learning approach to teaching learning justify the use of edna sampling as an appropriate technique for detecting the presence of silver carp in an environment where many different species of fish are found. propose one advantage of identifying long edna fragments as opposed to short fragments for detecting silver carp. how were thomas jefferson's views about blacks and native americans related to his fears about the preservation of republican society and to the threat each group posed to the republic? What is the authors critique of society in the story on the sidewalk bleeding Peter bought a big pack of 360360360 party balloons. The balloons come in 666 different colors which are supposed to be distributed evenly in the pack.Peter wants to test whether the distribution is indeed even, but he doesn't want to go over the entire pack. So, he plans to take a sample and carry out a 2 2 \chi, squared goodness-of-fit test on the resulting data.Which of these are conditions for carrying out this test? when demonstrating a process, sometimes speakers use themselves as a visual aid. what are the benefits of this? multiple select question. it helps keep the audience involved. it can help reduce speaker nervousness. it can add clarity for an audience. it does not require much practice. If X has a binomial distribution with n = 150 and the success probability p = 0.4 find the following probabilities approximately a. P48 S X 69) c. P(X 2 65) d. P(X < 60) Solve the initial value problem for r as a vector function of t. Differential Equation: dr/dt = 9/2 (t + 1)^1/2 i + 6 e ^-t j + 1/t + 1 k Initial condition: r(0) = k. r(t) = ___ i + ___ j + ___ k State whether or not the normal approximation to the binomial is appropriate ineach of the following situations.(a) n = 500, p = 0.33(b) n = 400, p = 0.01(c) n = 100, p = 0.61 simplify (a+b)/(a^2+b^2)*a/(a-b)*(a^4-b^4)/(a+b)^2 Assume that =8,uv=8, =6,u=6, and =4.v=4.Calculate the value of (6+)(10).(6u+v)(u10v). why will a cookie pan that's been heated by an oven, burn your hand but the air inside the oven will not