Answer:
m=6.25kg
Explanation:
Force= mass × acceleration
50=m×8
make m subject of the formula...
m=50/8
m=6.25kg
Answer:
[tex]\boxed {\boxed {\sf 6.25 \ kilograms}}[/tex]
Explanation:
According to Newton's Second Law of Motion, force is the product of mass and acceleration.
[tex]F= m \times a[/tex]
We know the force is 50 Newtons and the acceleration is 8 meters per second squared. Let's convert the units to make the problem and unit cancellation easier.
1 Newton is equal to 1 kilogram meter per square second (1 kg*m/s²), so the force of 50 N is equal to 50 kg*m/s².
Now we know 2 values:
F= 50 kg*m/s²a= 8 m/s²Substitute the values into the formula.
[tex]50 \ kg *m/s^2= m \times 8 \ m/s^2[/tex]
Since we are solving for the mass, we must isolate the variable, m. It is being multiplied by 8 meters per square second and the inverse of multiplication is division. Divide both sides by 8 m/s².
[tex]\frac {50 \ kg *m/s^2}{8 \ m/s^2}= \frac{m \times 8 \ m/s^2}{8 \ m/s^2}[/tex]
[tex]\frac {50 \ kg *m/s^2}{8 \ m/s^2}= m[/tex]
The units of meters per square second (m/s²) cancel.
[tex]\frac {50 \ kg }{8 }=m[/tex]
[tex]6.25 \ kg =m[/tex]
The mass is 6.25 kilograms.
46. Nuclear generating plants use the potential
energy stored in
to generate electrical
energy. (12.5)
Answer:
nuclear battery to generate energy
A force of 20 N acted on a 5 kg object, moving it a distance of 4 m. How much work was done on the object?
Answer:
400J
Explanation:
The work done by the force on the object is 80 J.
What is work ?The work is defined by the product of force and displacement. Its unit of measurement is joule. And the formula is,
Work = Force ×Displacement
Or mathematically it is W = F.d
In the question given data ,[tex]F = 20N , d = 4m\\[/tex]
putting in the above formula ,W = 20 × 4
W = 80 J
Hence the work done by the force is 80J.
Find out more information about work here:
https://brainly.com/question/11367798
#SPJ2
A 27 kg disk with a radius of 1.3m is spinning at an angular speed of 15 rad/s. What is the rotational kinetic energy of the disk?
Answer:
the rotational kinetic energy of the disk is 5,133.375 J
Explanation:
Given;
mass of the disk, m = 27 kg
radius of the disk, r = 1.3 m
angular speed, ω = 15 rad/s
The rotational kinetic energy of the disk is calculated as;
[tex]K.E_{rot} = \frac{1}{2}I \omega^2\\\\ where;\\I \ is \ moment \ of \ inertia\\\\K.E_{rot} = \frac{1}{2} \times (mr^2) \times \omega ^2\\\\ K.E_{rot} = \frac{1}{2} \times (27\times 1.3^2) \times \ 15^2\\\\K.E_{rot} = 5,133.375 \ J[/tex]
Therefore, the rotational kinetic energy of the disk is 5,133.375 J
True or false? Potential difference is measured in joules
[tex]\huge\colorbox{purple}A\colorbox{blue}n\colorbox{purple}s\colorbox{blue}w\colorbox{purple}e\colorbox{blue}r [/tex]
[tex]\color{Violet}\rm{Hopeithelps!シ︎}[/tex]
uhm i think TRUE✨
I'm not sure hehe.
If one joule of energy is required to move one coulomb of charge through a component in a circuit, then the potential difference across the component is one volt (or 1 joule per coulomb).__________________________________
“The Lord your God is in your midst — a warrior bringing victory. He will create calm with his love; he will rejoice over you with singing.” — Zephaniah 3:17 ❤
__________________________________
Potential difference is measured in joules is true statement.
What is potential difference?The difference in charge carriers' energy between two places in a circuit is known as the potential difference.
Voltage is another name for potential difference (p.d.), which is expressed in volts (V). When charge carriers move through electrical components in a circuit, energy is delivered to those parts. To determine the potential difference, we use a voltmeter (or voltage).
The amount of current multiplied by the resistance equals the potential difference, which is the same as voltage. One Coulomb of charge uses one Joule of energy to move between two points in a circuit, which is equal to a potential difference of one Volt.
Therefore, Potential difference is measured in joules is true statement.
To learn more about potential difference, refer to the link:
https://brainly.com/question/15126283
#SPJ2
How long does it take you to create 200 Watts of power if you use 1000 J of
work?
Answer:200,000
Explanation:
p=w/t
200=1000/t
t=200*1000
time=200,000
What is moment? Write down the law of moment.A long spanner is used to unscrew the tight nut.Why?
Answer:
Moment is the product of force and its perpendicular distance from a point along its line of action.
The net moments on clockwise and anticlockwise is zero at a point.
The net force applied on a spanner handle is equal to the moment of the rotation
Multiple Choice Identify the letter of the choice that best completes the statement or answers the question. The best type of graph to illustrate the change in air temperature over a period of time would be a _________ graph. a. circle b. line c. bar d. all of these Please select the best answer from the choices provided A B C D
Answer:
B line graph
Explanation:
sorry if I am wrong
Answer:
b
Explanation:
A force of 120N acts on 200g of an object. Calculate the acceleration of the object
Answer:
Explanation:
This is very straightforward, except that we need the mass in kg and it's in g. So we have to convert first, using the fact that there are 1000g in 1 kg:
[tex]200g*\frac{1kg}{1000g}=.200kg[/tex] and now we're ready to solve your problem.
F = ma and
120 = .200a so
a = 6.0 × 10² (which is 600 m/s/s)
An organism that is only one cell big and has a nucleus is most likely a member of which kingdom?
Answer:
Protista
Explanation:
Taxonomy can be defined as the process of naming, classification and description of living organisms such as plants and animals. Thus, the biological classification of living organisms based on similarities or characteristics such as eyes, number of legs, etc., is generally referred to as taxonomy.
Basically, taxonomy helps scientist to have a good understanding and knowledge when studying various organisms.
Furthermore, the eight (8) biological classification (taxonomy) used for grouping and organizing organisms are; kingdom, domain, phylum, family, order, class, species and genus.
An organism that has only one cell, big and has a nucleus is most likely a member of Protista. Thus, a Protista such as euglena, paramecium, amoeba, etc., have a nucleus and are unicellular.
A unicellular organism refers to a living organism that possess a single-cell while a multicellular organism has many (multiple) cells.
Atoms are attracted to each other because____
A) electrons are attracted to protons because they have opposite charges
B) magnets pull them together
C) the protons are attracted to each other because they have the same charge
D) they have some energy
Answer:
A
Explanation:
Opposite attract. Since electrons are negative they will be attracted to the protons because they a positive
aehaeheahsdnesrthwahweahaw
At what point will the electric field of a charged object be strongest?
A where the electric field lines are perpendicular to the equipotential line
B. where the electric field lines are farthest apart
C. where the electric field lines are closest together
D. where the electric field lines are parallel to the equipotential line
Answer:
The answer is C because they have to be close to be able to interact
Answer:
C. where the electric field lines are closest together
Explanation:
A ball is rolling along a straight and level path. The ball is traveling at a constant speed of 2.0 m/s. The mass of the ball is 3.0 kg. What is the kinetic energy of the ball?
A. 6.0 J
B. 9.0 J
C. 12.0 J
D. 3.0 J
goodie morning
—————————
what is nitric acid?
Answer:
Nitric acid, also known as aqua fortis and spirit of niter, is a highly corrosive mineral acid. The pure compound is colorless, but older samples tend to acquire a yellow cast due to decomposition into oxides of nitrogen and water. Most commercially available nitric acid has a concentration of 68% in water.
Explanation:
Good morning...
Nitric acid production is mainly driven by fertilizer industry. Nitric acid is used in the production of ammonium nitrate and calcium ammonium nitrate which find applications as fertilizers.
Some people can roll the tongue into a tube shape, while others cannot. Practicing is not likely to help because tongue-rolling is an inherited trait. The allele for rolling the tongue (R) is dominant to the allele for not being able to roll the tongue (r). Look at the Punnett square. It shows a cross between two parents with at least one R allele. Drag each option to its spot to correctly finish the Punnett square.
Hope this helps you.
hmkjiji8gjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
Date:
Page:
# Excercise.
7.
A very short answer questions.
what is acceleration due to gravity? what is
value of 'g’ on equatorial region and
polar region of the earth?
the
Answer:
See the answer below
Explanation:
Acceleration due to gravity (g) is the accelerational force experienced by a body as a result of the influence of the earth's gravitational force. It is a vector quantity, that is, it has both magnitude and direction.
The acceleration due to gravity is inversely proportional to the square of the radius of the earth. Hence, g at the equatorial region is slightly lesser (9.780 m/s2) than that of the polar regions (9.832 m/s2) of the earth because the earth bulges at the equator leading to a higher radius than at the poles.
what is electricity?write any two defects of a simple cell.
Answer:
Electricity is the set of physical phenomena associated with the presence and motion of matter that has a property of electric charge. Electricity is related to magnetism, both being part of the phenomenon of electromagnetism, as described by Maxwell's equations.
Un campo eléctrico es creado por una carga eléctrica de 5 microcoulomb, a 35 cm se coloca una carga de prueba la cual es atraída por una fuerza de 1,5 N. Determinar:
Answer:
Supongo que queremos determinar la carga de la carga de prueba.
Sabemos que la fuerza culombiana entre dos cargas q₁ y q₂, separadas por una distancia R, está dada por:
[tex]F = k_c*\frac{|q_1*q_2|}{R^2}[/tex]
Aislandolo para una de las cargas, obtenemos:
[tex]\frac{F*R^2}{kc*|q_1|} =|q_2|[/tex]
En este caso sabemos:
fuerza atractiva, por lo que los signos de las cargas son opuestos.
q₁ = 5 mC
R = 35cm
F = 1.5 N
Kc = 9*10^9 N*m^2/C^2
Un primer paso, seria reescribir todos los valores en las mismas unidades.
Sabiendo que:
100cm = 1m
R = 35cm = (35/100) m = 0.35m
Y sabiendo que:
1mc = 1*10^(-6) C
Entonces:
q₁ = 5 mC = 5*1*10^(-6) C = 5*10^(-6) C
Ahora podemos reemplazar esos valores en la ecuación de la fuerza, para obtener el valor de la otra carga:
[tex]\frac{15N*(0.35m)^2}{(9*10^9 N*m^2/C^2)*5*10^{-6}C} =|q_2| = 4.08*10^{-5} C[/tex]
Y recordar que las cargas tienen signo opuesto, entonces la carga de la carga de prueba es:
q₂ = -4.08*10^-5 C
A 15.0 kg crate, initially at rest, slides down a ramp 2.0 m long and inclined at an angle of 20.0° with the horizontal. Using the work-kinetic energy theorem and disregarding friction, find the
velocity of the crate at the bottom of the ramp. (g = 9.81 m/s?)
The component of the crate's weight that is parallel to the ramp is the only force that acts in the direction of the crate's displacement. This component has a magnitude of
F = mg sin(20.0°) = (15.0 kg) (9.81 m/s^2) sin(20.0°) ≈ 50.3 N
Then the work done by this force on the crate as it slides down the ramp is
W = F d = (50.3 N) (2.0 m) ≈ 101 J
The work-energy theorem says that the total work done on the crate is equal to the change in its kinetic energy. Since it starts at rest, its initial kinetic energy is 0, so
W = K = 1/2 mv ^2
Solve for v :
v = √(2W/m) = √(2 (101 J) / (2.0 m)) ≈ 10.0 m/s
A 14300 kg airplane is flying at an altitude of 147 m at a speed of 214 m/s. determine the airplane's total mechanical energy.
Answer:
Mechanical energy in Joules:
348,041,980
The total mechanical energy of the airplane is equal to 348,041,980 Joules.
Given the following data:
Mass = 14300 kgHeight = 147 meters.Velocity = 214 m/s.Scientific data:
Acceleration due to gravity on Earth = 9.8 [tex]m/s^2[/tex]To calculate the total mechanical energy of the airplane:
How to calculate total mechanical energy.The total mechanical energy possessed by this airplane is equal to the sum of both the potential energy and kinetic energy at the given altitude.
Mathematically, the total mechanical energy is given by this formula:
[tex]E = \frac{1}{2}mv^2 + mgh[/tex]
Substituting the given parameters into the formula, we have;
[tex]E = \frac{1}{2}\times 14300 \times 214^2 + 14300 \times 9.8 \times 147\\\\E=7150 \times 45796 + 20600580\\\\E= 327441400 + 20600580[/tex]
E = 348,041,980 Joules.
Read more on mechanical energy here: brainly.com/question/17081653
The rate at which electric
charges flow through a
circuit
Answer:
The answer is Current.
A standing wave measures 12 m between its first and fourth node and its frequency 325 Hz. What is the standing wave's speed?
1300 m/s
380 m/s
1500 m/s
750 m/s
Answer:
1300 m/s
Explanation:
Applying,
v = λf/2............... Equation 1
Where v = velocity or speed of wave, f = frequency of wave, λ = wavelength of wave.
From the question,
Given: f = 325 Hz, λ = (12×2/3) = 8 m
Substitute these values into equation 2
v = 325(8)/2
v = 1300 m/s.
Hence the standing wave speed is 1300 m/s
The right option is 1300 m/s
Accuracy of physical balance is dash
Answer:
the answer for this is my.
How to find the total displacement of an object ?
Answer:
it can be calculated by measuring the final distance away from a point, and then subtracting the initial distance
If two students push a box with a force of 3N in the same direction, and there is no other unbalanced force on the box, what is the magnitude of the net force on the box? *
0N
3N
6N
9N
Answer:
SILEM B
Explanation:
ERILAQNQJJQKIQKQJNDJKIDJKS
A function is defined by f(x)= 6x+1.5. What is f(2.5)?
Answer:
f(2.5) = 16.5
General Formulas and Concepts:
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightAlgebra I
FunctionsFunction NotationExplanation:
Step 1: Define
Identify
[Function] f(x) = 6x + 1.5
[Given] f(2.5) is x = 2.5 for function f(x)
Step 2: Evaluate
Substitute in x [Function f(x)]: f(2.5) = 6(2.5) + 1.5Multiply: f(2.5) = 15 + 1.5Add: f(2.5) = 16.5Which statements describe acceleration? Check all that apply.
Negative acceleration occurs when an object slows down in the positive direction.
Negative acceleration occurs when an object slows down in the negative direction
Negative acceleration occurs when an object speeds up in the negative direction.
O Positive acceleration occurs when an object speeds up in the positive direction.
Positive acceleration occurs when an object speeds up in the negative direction.
Positive acceleration occurs when an object slows down in the negative direction.
Answer:
Negative acceleration occurs when an object slows down in the positive direction.
Negative acceleration occurs when an object speeds up in the negative direction.
Positive acceleration occurs when an object speeds up in the positive direction.
Positive acceleration occurs when an object slows down in the negative direction.
Explanation:
Basically same sign is speeding up and different sign is slowing down
Which statement best describes science?
Answer:
Science is a collection of knowledge about the natural world, but it is also the process of discovering how the natural world works. It is supported by evidence.
Answer: The correct answer is C). Science is a collection of knowledge about the natural world, but it is also the process of discovering how the natural world works.
Explanation:
Many scientific discoveries are made by chance. While studying one phenomenon, a scientist may discover a different one. Such was the case when William Herschel discovered the planet Uranus in 1781. Herschel was charting faint stars in the sky, when he discovered something that was not a star. How can astronomers tell the difference between a star and a planet
Answer:
One simple explanation is that planets move, while stars remained fixed in the sky. You can observe a planet's orbit, but a star will stay in the same position.
Explanation:
Stars emit their own light due to thermonuclear fusion while planets have fixed orbits and they do not have their own light.
What are the differences between a planet and a star?A star can be described as an astronomical body that possesses a light that causes it to reflect the light. A planet can be described as a fixed celestial body with a fixed path that spins on its own axis and reflects the light from an external source. Planets do not have an internal light source and receive light from external sources such as the Sun.
Stars have incredibly hot high temperatures while planets have relatively low temperatures. Stars produce their own light but planets are incapable of producing their own light.
Stars exhibit the unique effect of twinkling in the sky while planets do not exhibit the twinkling effect. The position of stars changes but can be seen only after a long time while planets in orbits change their positions constantly.
Learn more about stars and planets, here:
https://brainly.com/question/14412087
#SPJ5