hooow do you rank halogens in order from least active too most active
The halogens ranked from least active to most active are: At, I, Br, Cl, and F.
To rank halogens in order from least active to most active, follow these steps:
1. Recall that halogens are elements in Group 17 (VIIA) of the periodic table, which includes fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).
2. Understand that the reactivity of halogens decreases as you move down the group. This is due to the increasing atomic size and decreasing electronegativity, making it more difficult for the atom to attract and gain electrons.
3. Arrange the halogens from least active to most active, based on their position in the periodic table, starting from the bottom and moving upward:
Least active: Astatine (At) → Iodine (I) → Bromine (Br) → Chlorine (Cl) → Most active: Fluorine (F)
Know more about halogens - brainly.com/question/1450671
#SPJ11
Consider the acid-base reaction and classify each of the reactants and products as an acid or base according to the Brønsted theory. CF3COOH + H20 근 H30' + CF3COO- Acid Base Answer Bank CE,CoO CF,COOH 8 9 6
According to the Brønsted theory, an acid is a substance that donates a proton (H+), and a base is a substance that accepts a proton. In the given reaction:
CF3COOH + H2O → H3O+ + CF3COO-
CF3COOH is an acid because it donates a proton to H2O.
H2O acts as a base because it accepts a proton from CF3COOH.
In the products:
H3O+ is an acid because it has an extra proton.
CF3COO- is a base because it has accepted a proton from CF3COOH.
So, the classification is:
CF3COOH - Acid
H2O - Base
H3O+ - Acid
CF3COO- - Base
Learn more about Bronsted theory here:
https://brainly.com/question/30460067
#SPJ11
Calculate the pH of a 2.00 M solution of nitrous acid (NHO2). The Ka for nitrous acid is 4.5 x 10-4 A. 1.54 B. 2.23 C. 2.97 D. 4.14.
pH of the solution is 1.54. The correct alternative is A.
The Ka expression for nitrous acid is:
Ka = [H⁺][NO₂⁻] / [HNO₂]
Let x be the concentration of H⁺ and NO₂⁻ ions that are formed in the dissociation of nitrous acid, and assume that the initial concentration of nitrous acid is 2.00 M. Then, the equilibrium concentrations will be:
[HNO₂] = 2.00 - x
[H⁺] = x
[NO₂⁻] = x
Substituting these values into the Ka expression and solving for x:
Ka = [H⁺][NO₂⁻] / [HNO]
4.5 x 10⁻⁴ = x² / (2.00 - x)
This equation can be simplified using the approximation that x << 2.00:
4.5 x 10⁻⁴ = x² / 2.00
x² = 9 x 10⁻⁴
x = 3 x 10⁻₂
Therefore, [H+] = 3 x 10⁻² M, and the pH of the solution is:
pH = -log[H⁺]
pH = -log(3 x 10⁻²)
pH ≈ 1.52
Therefore, the correct answer is A. 1.54.
To know more about pH is:
https://brainly.com/question/491373#
#SPJ11
for a particular process that is carried out at constant pressure, q = 145 kj and w = -35 kj. Therefore,
ΔE = 145 kJ and ΔH = 110 kJ.
ΔE = 110 kJ and ΔH = 145 kJ.
ΔE = 145 kJ and ΔH = 180 kJ.
ΔE = 180 kJ and ΔH = 145 kJ.
For a particular process that is carried out at constant pressure, q = 145 KJ and w = -35 KJ. Therefore using thermodynamics ΔE = 110 kJ and ΔH = 145 kJ, option B.
The first rule of thermodynamics states that although energy cannot be generated or destroyed, it may be changed from one form to another. The first law of thermodynamics' mathematical formulation reveals the relationship between internal energy, heat transmitted, and work accomplished.
The study of heat transfers, a system's ability to create work, and the conversion of energy falls within the purview of thermodynamics. In contrast to systems containing atoms or molecules, systems containing particles are the focus of study in this field.
The principles of thermodynamics may be used to explain all of this, and they are based on observations of the aforementioned systems at an equilibrium rather than on theoretical research.
According to the first law of thermodynamics,
ΔE = q + w
= 145 + (-35)
ΔE = 110 kJ.
Also, at constant pressure, ΔH is equal to the heat transferred (q).
So, ΔH = q = 145 kJ.
Learn more about Thermodynamics:
https://brainly.com/question/13059309
#SPJ4
In two or more complete sentences, compare the four different types of organic molecules in living organisms. Write
your answer in the essay box below.
(SCIENCE)
Answer:
The four different types of organic molecules in living organisms are carbohydrates, lipids, proteins, and nucleic acids. Carbohydrates are composed of carbon, hydrogen, and oxygen atoms and are a source of energy for the body. Lipids are composed of carbon, hydrogen, and oxygen atoms and are important for energy storage, insulation, and cell membrane structure. Proteins are composed of amino acids and are involved in various biological functions, such as enzyme catalysis, muscle contraction, and immune response. Nucleic acids are composed of nucleotides and store genetic information. All four types of organic molecules are essential for life and work together to maintain biological processes.
Where has the thermal energy in the polystyrene cup when it has cooled down to room temperature?
(Talk about how it decreases as the particles collide less frequently, and then thermal equilibrium is reached with room temperature)
The thermal energy in a polystyrene cup, or any object for that matter, is stored in the kinetic energy of its particles. When a hot object, such as a cup of hot liquid, is left to cool down to room temperature, the thermal energy stored in the cup decreases as the particles collide less frequently.
As the cup and its contents cool, the particles within the cup begin to lose kinetic energy as they collide with each other and with the surrounding environment. As the particles lose energy, they move more slowly, which in turn decreases the amount of thermal energy stored in the cup.
Eventually, the cup and its contents reach a state of thermal equilibrium with the surrounding environment, meaning that they have reached the same temperature as their surroundings. At this point, the thermal energy stored in the cup has been completely transferred to the environment, and the cup is said to be at room temperature.
Overall, the decrease in thermal energy in a polystyrene cup when it cools down to room temperature is a result of the transfer of kinetic energy from the particles within the cup to the particles in the surrounding environment, through collisions and other forms of energy transfer.
Have a Great Day!-
Answer:
When a polystyrene cup cools down to room temperature, it means that the thermal energy in the cup has been transferred to its surroundings until thermal equilibrium is reached. Thermal energy transfer can occur through conduction, convection, and radiation. Conduction involves molecules transferring kinetic energy to one another through collisions. In this case, the thermal energy from the cup is transferred to the air molecules around it through collisions until both the cup and its surroundings reach the same temperature.
Explanation:
Thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat is the flow of thermal energy. When two objects or systems are at different temperatures, heat will flow from the hotter object to the cooler one until both objects reach the same temperature. This state is called thermal equilibrium.
There are three ways that heat can be transferred: conduction, convection, and radiation. Conduction is the transfer of heat through direct contact between particles of a substance without moving the particles to a new location. This happens when molecules collide with each other and transfer their kinetic energy. For example, when you touch a hot pan on the stove, heat is transferred from the pan to your hand through conduction.
Convection occurs when hot air rises, allowing cooler air to come in and be heated. This creates a cycle where hot air rises and cool air sinks, creating a current that transfers heat. For example, when you boil water on the stove, the heat from the stove heats the water at the bottom of the pot. This hot water rises to the top and cooler water sinks to the bottom to be heated, creating a convection current that transfers heat throughout the pot.
Radiation is the transfer of heat through electromagnetic waves. This can happen even in a vacuum where there are no particles to transfer heat through conduction or convection. For example, when you stand in front of a fire, you can feel the heat even though you are not touching it. This is because heat is being transferred to you through radiation.
In the case of a polystyrene cup cooling down to room temperature, heat is transferred from the cup to its surroundings through conduction until thermal equilibrium is reached and both the cup and its surroundings are at the same temperature.
describe the difference between a continuous spectrum from a black body radiator and a line spectrum
The main difference between a continuous and linear spectrum is the presence or absence of gaps or missing colors in the emitted light.
A continuous spectrum, such as that emitted by a blackbody radiator, shows a wide range of frequencies or wavelengths of light with no gaps. The intensity of the emitted light varies continuously throughout the spectrum. Blackbody radiators, like the Sun, produce light by thermal radiation and exhibit a continuous spectrum.
A line spectrum, on the other hand, consists of distinct and separate lines or "spectra" at specific frequencies or wavelengths. This type of spectrum is produced when atoms or molecules in a gas phase emit or absorb light at particular wavelengths, which are unique to the element or compound involved. Line spectra are characteristic of elements and can be used for identification purposes.
Learn more about the electromagnetic spectrum at https://brainly.com/question/25131143
#SPJ11
calculate the length in angstroms of a 100-residue segment of the keratin coiled coil
The collagen coiled coil is 145.7 in size for a section of 100 residues. A polypeptide chain called -keratin creates a right-handed -helix and is often rich in alanine, leucine, arginine, and cysteine.
100 residues x (1 helical turn/3.6 residues) = 27.78 helical turns; 5.4A per helical turn; multiplied by 27.78 helical turns; equals 142A. A coiled coil is made up of two of these polypeptide chains that twist together to produce a left-handed helical structure.The surface of a protein is more likely to have gln. A protein's surface is less likely to contain ser. The midsection of a helix is less likely to include Lle.Serine would be outer because it is an uncharged polar atom.The three charged residues (Lys, Glu, and Arg) in peptide C are most likely to align on one face of an alpha helix.
To know more about coiled coil, click here:
https://brainly.com/question/31309522
#SPJ4
To what temperature must a balloon, initially at 9°C and 4.00 L, be heated in order to have a volume of 6.00 L? 0 13.5K O6K 423K 188 K O 993K
The balloon must be heated to a temperature of approximately: 423 K in order to have a volume of 6.00 L.
To find the temperature to which a balloon must be heated, initially at 9°C and 4.00 L, in order to have a volume of 6.00 L, we can use the combined gas law. The combined gas law is given by:
(P1 * V1) / T1 = (P2 * V2) / T2
Since pressure (P) remains constant in this problem, we can remove it from the equation and use Charles's Law:
V1 / T1 = V2 / T2
First, convert the initial temperature from Celsius to Kelvin:
T1 = 9°C + 273.15 = 282.15 K
Next, plug in the values for V1, T1, and V2:
(4.00 L) / (282.15 K) = (6.00 L) / T2
Now, solve for T2:
T2 = (6.00 L * 282.15 K) / 4.00 L = 423.225 K
Since the given options are in whole numbers, round the answer:
T2 ≈ 423 K
To know more about "Charles's Law" refer here:
https://brainly.com/question/16927784#
#SPJ11
If ∆H°rxn and ∆S°rxn are both negative values, what drives the spontaneous reaction and in what direction at standard conditions?
The spontaneous reaction is
a) entropy-driven to the left.
b) enthalpy-driven to the right.
c) entropy-driven to the right.
d) enthalpy-driven to the left.
If ∆H°rxn and ∆S°rxn are both negative values, the spontaneous reaction at standard conditions is: entropy-driven to the right and enthalpy-driven to the left.
Enthalpy-driven to the left because a negative ∆H°rxn indicates an exothermic reaction, which releases heat and tends to be spontaneous. However, a negative ∆S°rxn means that the reaction leads to a decrease in entropy, which is unfavorable for spontaneity. Since both values are negative, the reaction will be driven by enthalpy and favor the reverse direction, or to the left.
If both ∆H°rxn and ∆S°rxn are negative values, the spontaneous reaction is entropy-driven to the right at standard conditions. This means that the reaction will proceed in the forward direction without the need for external energy input. The negative ∆H°rxn value indicates that the reaction is exothermic, releasing heat, while the negative ∆S°rxn value indicates a decrease in entropy or disorder. However, in this case, the decrease in enthalpy is overcome by the increase in entropy, resulting in a spontaneous reaction in the forward direction.
Learn more about the spontaneous reaction at https://brainly.com/question/14061406
#SPJ11
How many kinds of chemically non-equivalent hydrogens are there in each of the following compounds?
a. 2-Methylpropene The number of chemically non-equivalent hydrogens is _____ b. 2-Methyl-2-butene The number of chemically non-equivalent hydrogens is _____
For both 2-Methylpropene and 2-Methyl-2-butene, the number of chemically non-equivalent hydrogens is 3.
How to calculate the chemically non-equivalent hydrogens in a compound?
a. In 2-Methylpropene, there are three kinds of chemically non-equivalent hydrogens:
1. The hydrogens on the double-bonded carbon.
2. The hydrogens on the singly-bonded carbon adjacent to the double bond.
3. The hydrogens on the methyl group.
So, the number of chemically non-equivalent hydrogens in 2-Methylpropene is 3.
b. In 2-Methyl-2-butene, there are also three kinds of chemically non-equivalent hydrogens:
1. The hydrogens on the double-bonded carbon atoms.
2. The hydrogens on the singly-bonded carbon adjacent to the double bond.
3. The hydrogens on the methyl group.
So, the number of chemically non-equivalent hydrogens in 2-Methyl-2-butene is 3.
To know more about Non-Equivalent hydrogens:
https://brainly.com/question/30901472
#SPJ11
Given the thermochemical equations:
A(g)⟶B(g)ΔH=60 kJ
B(g)⟶C(g)ΔH=−110 kJ
find the enthalpy changes for each reaction.
3A(g)⟶3B(g)ΔH=______kJ
B(g)⟶A(g)ΔH=_______kJ
A(g)⟶C(g)ΔH=_______kJ
The enthalpy changes for each reaction are: 3A(g)⟶3B(g)ΔH = 180 kJ; B(g)⟶A(g)ΔH = -60 kJ; A(g)⟶C(g)ΔH = -50 kJ
1. For the reaction 3A(g) → 3B(g), we can simply multiply the first given equation by 3 to find the enthalpy change:
3(A(g) → B(g)) → 3A(g) → 3B(g)
3(ΔH = 60 kJ) → ΔH = 3 * 60 kJ = 180 kJ
2. For the reaction B(g) → A(g), we can reverse the first given equation to find the enthalpy change:
A(g) → B(g) → B(g) → A(g)
ΔH = -60 kJ (reversing the reaction changes the sign)
3. For the reaction A(g) → C(g), we can add the two given equations to find the enthalpy change:
A(g) → B(g) + B(g) → C(g) → A(g) → C(g)
ΔH = 60 kJ + (-110 kJ) = -50 kJ
So the enthalpy changes for each reaction are:
3A(g) → 3B(g): ΔH = 180 kJ
B(g) → A(g): ΔH = -60 kJ
A(g) → C(g): ΔH = -50 kJ
Know more about enthalpy here:
https://brainly.com/question/14047927
#SPJ11
Predict the product for the following reaction sequence. 1. PBr3 Mg/ether H PCC OH 2. H30+ 6,7-dimethyl-3-nonanol 6,7-dimethyl-3-nonanone 6,7-dimethyl-3-nonanal 3,4-dimethyl-7-nonanol
The product for the given reaction sequence would be: 3,4-dimethyl-7-nonanol.
The first reaction involves the conversion of 6,7-dimethyl-3-nonanol to 6,7-dimethyl-3-nonanone using PBr3 and then further oxidizing it to 6,7-dimethyl-3-nonanal using PCC.
In the second step, the resulting 6,7-dimethyl-3-nonanal is treated with H3O+ to form the final product, that is:
3,4-dimethyl-7-nonanol.
Based on the reaction sequence provided, the product for this reaction is 6,7-dimethyl-3-nonanone.
The initial reaction involves PBr3 to replace the OH group with a Br, then Mg/ether forms a Grignard reagent, followed by the addition of H30+ to protonate the oxygen, and finally, PCC oxidizes the alcohol to a ketone.
To know more about Grignard reagent: brainly.com/question/28188958
#SPJ11
The product for the given reaction sequence would be: 3,4-dimethyl-7-nonanol.
The first reaction involves the conversion of 6,7-dimethyl-3-nonanol to 6,7-dimethyl-3-nonanone using PBr3 and then further oxidizing it to 6,7-dimethyl-3-nonanal using PCC.
In the second step, the resulting 6,7-dimethyl-3-nonanal is treated with H3O+ to form the final product, that is:
3,4-dimethyl-7-nonanol.
Based on the reaction sequence provided, the product for this reaction is 6,7-dimethyl-3-nonanone.
The initial reaction involves PBr3 to replace the OH group with a Br, then Mg/ether forms a Grignard reagent, followed by the addition of H30+ to protonate the oxygen, and finally, PCC oxidizes the alcohol to a ketone.
To know more about Grignard reagent: brainly.com/question/28188958
#SPJ11
A sample of Freon?12 (CF2Cl2) occupies 10.0 L at 374 K and 191.50 kPa. Find its volume at STP.
The volume of the Freon-12 sample at STP is approximately 14.87 L.
How to find the volume of a compound at STP?To find the volume of a sample of Freon-12 (CF2Cl2) at STP, given that it occupies 10.0 L at 374 K and 191.50 kPa, we can use the combined gas law formula.
1. Write down the given information:
Initial volume (V1) = 10.0 L
Initial temperature (T1) = 374 K
Initial pressure (P1) = 191.50 kPa
Standard temperature (T2) = 273 K
Standard pressure (P2) = 101.3 kPa
2. Apply the combined gas law formula:
(P1 * V1) / T1 = (P2 * V2) / T2
3. Plug in the given values and solve for the final volume (V2):
(191.50 kPa * 10.0 L) / 374 K = (101.3 kPa * V2) / 273 K
4. Solve for V2:
V2 = (191.50 kPa * 10.0 L * 273 K) / (374 K * 101.3 kPa) ≈ 14.87 L
To know more about Combined Gas Law:
https://brainly.com/question/15131030
#SPJ11
How would you synthesize the following compounds from benzene using reagents from the table?a) Phenylacetic acid, C6H5CH2CO2Hb) m-Nitrobenzoic acid
To synthesize phenylacetic acid (C₆H₅CH₂CO₂H) and m-nitrobenzoic acid from benzene, you would follow these steps:
For phenylacetic acid:
1. Perform Friedel-Crafts alkylation on benzene using ethyl chloride and aluminum chloride as catalyst to form ethylbenzene.
2. Oxidize ethylbenzene using potassium permanganate (KMnO₄) to obtain phenylacetic acid.
For m-nitrobenzoic acid:
1. Nitrate benzene with a mixture of concentrated nitric acid (HNO₃) and concentrated sulfuric acid (H₂SO₄) to form nitrobenzene.
2. Perform Friedel-Crafts acylation using acetyl chloride and aluminum chloride as catalyst to obtain m-nitroacetophenone.
3. Hydrolyze m-nitroacetophenone using aqueous potassium hydroxide (KOH) to form m-nitrobenzoic acid.
In summary, synthesize phenylacetic acid and m-nitrobenzoic acid from benzene through Friedel-Crafts reactions, followed by oxidation and hydrolysis, respectively.
To know more about Friedel-Crafts alkylation click on below link:
https://brainly.com/question/30884625#
#SPJ11
if small amounts of ba2 and ca2 remain in s14, how will the test for mg2 be affected?
If small amounts of Ba2+ and Ca2+ remain in the solution S14, the test for Mg2+ may be affected due to interference from these ions. They could cause false positive or inconclusive results, making it difficult to accurately determine the presence of Mg2+ ions in the solution. To ensure an accurate test for Mg2+.
If small amounts of Ba2+ and Ca2+ remain in s14, the test for Mg2+ may be affected as these ions can interfere with the accuracy of the test. Ba2+ and Ca2+ ions can form insoluble precipitates with some of the reagents used in the test for Mg2+, which can lead to false positives or false negatives. Therefore, it is important to ensure that the sample being tested for Mg2+ is free of any interfering ions such as Ba2+ and Ca2+. If the sample does contain these interfering ions, additional steps may need to be taken to remove them before performing the Mg2+ test.
Learn more about ions here: brainly.com/question/14982375
#SPJ11
consider the reaction: sn(s) 4hno3(aq)→sno2(s) 4no2(g) 2h2o(g
Consider the reaction: Sn(s) + 4HNO3(aq) → SnO2(s) + 4NO2(g) + 2H2O(g). In this balanced chemical reaction, solid tin (Sn) reacts with aqueous nitric acid (HNO3) to produce solid tin(IV) oxide (SnO2), gaseous nitrogen dioxide (NO2), and gaseous water (H2O).
The given reaction is a redox reaction, where the tin (Sn) metal is being oxidized and the nitric acid (HNO3) is being reduced.
When considering this reaction, it is important to note that it is exothermic, meaning it releases heat energy. Additionally, the products of the reaction are a solid (SNO2), a gas (NO2), and water vapor (H2O).
It is also worth noting that this reaction is not balanced - there are different numbers of atoms on the reactant and product sides of the equation. Therefore, it would need to be balanced before any calculations or further analysis could be done.
Learn more about reaction here:
https://brainly.com/question/30115256
#SPJ11
a) What is the angular speed (in rad/s) of the car? rad/s (b) What are the magnitude (in m/s2) and direction of the car's acceleration? m/s2 magnitude direction Select
a. The angular speed (in rad/s) of the car is: ω = v / r.
b. The magnitude: a = [tex]v^2[/tex] / r (in m/s2) and direction of the car's acceleration is towards the: center of the circular path.
To answer your question, we will know how to calculate the angular speed and the magnitude and direction of the car's acceleration using the given terms.
a) To find the angular speed (ω) of the car in rad/s, you can use the formula:
ω = v / r
where v is the linear speed of the car (in m/s) and
r is the radius of the circular path (in meters).
b) To find the magnitude of the car's acceleration (a), you can use the formula:
a = [tex]v^2[/tex] / r
The direction of the car's acceleration is towards the center of the circular path, also known as centripetal acceleration.
To know more about "Centripetal acceleration" refer here:
https://brainly.com/question/18695728#
#SPJ11
calculate ph of a 0.045 m aqueous solution of an acid, ha, whose ionization constant ka is 1.93·107. give the answer in two sig figs.
The pH of the 0.045 M aqueous solution of the acid HA is approximately 4.53.
To calculate the pH of a 0.045 M aqueous solution of an acid (HA) with an ionization constant (Ka) of 1.93 x 10^-7, we can use the following formula:
pH = -log10[H+]
First, we need to find the concentration of hydrogen ions (H+). Since HA is a weak acid, we can set up an equilibrium expression using Ka:
Ka = [H+][A-]/[HA]
1.93 x 10^-7 = (x)(x)/(0.045 - x)
Assuming x is much smaller than 0.045, we can simplify the equation:
1.93 x 10^-7 ≈ x^2/0.045
Now, solve for x:
x^2 = (1.93 x 10^-7)(0.045)
x^2 = 8.685 x 10^-9
x = 2.95 x 10^-5 M (concentration of H+)
Finally, calculate the pH:
pH = -log10(2.95 x 10^-5)
pH ≈ 4.53 (rounded to two sig figs)
Learn more about acid HA here:
https://brainly.com/question/9207964
#SPJ11
calculate the ph during the titration of 30.00 ml of 0.1000 m methylamine, (ch3)nh2(aq), with 0.1000 m hcl(aq) after 22 ml of the acid have been added. kb of methylamine = 3.6 x 10-4.
The pH during the titration of 30.00 mL of 0.1000 M methylamine having 0.1000 M HCl after 22 mL of the acid have been added is 3.54.
To determine the pH during the titration of a weak base with a strong acid, we need to find the moles of base initially present and the moles of acid added. Then, we use the balanced chemical equation to determine the moles of acid and base that react, and we use the equilibrium expression for the weak base to determine the concentration of the hydroxide ions present in solution.
Determine the moles of methylamine initially present;
moles of methylamine = (30.00 mL)(0.1000 M) = 0.00300 mol
Determine the moles of HCl added;
moles of HCl = (22.00 mL)(0.1000 M) = 0.00220 mol
Determine the limiting reagent and the moles of base that react;
HCl is the limiting reagent because it is added in a smaller amount. The moles of base that react are equal to the moles of HCl added.
Determine the concentration of methylammonium ion at equilibrium;
(CH₃)NH₃⁺ + H₂O ⇌ (CH₃)NH₂ + H₃O⁺
Kb = [CH₃NH₂][H₃O⁺] / [CH₃NH₃⁺]
At equilibrium, [CH₃NH₂] = 0.00300 - 0.00220 = 0.00080 M
[CH₃NH₃⁺] = [HCl] = 0.00220 M
Kb = (0.00080)(x) / 0.00220
x = [H₃O⁺] = 2.91 x 10⁻⁴ M
Determine the pH;
pH = -log[H₃O⁺]
= -log(2.91 x 10⁻⁴)
= 3.54
To know more about titration here
https://brainly.com/question/2728613
#SPJ4
How much power does it take to accelerate a 10 kg object at 1 m/s2 over a distance of 2 m in 10 seconds?
Answer:
10 Watts
Explanation:
These equations are needed to work out the answer:
power= work done/ time taken
work done= force* distance
force= mass* acceleration
force: 10 kg* 1m/s= 10
work done: 10 * 2m= 20m
power: 20/2= 10
Hope this helps :)
Pls brainliest...
* Sorry if my answer is bad, I'm learning this kind of things in Physics*
James, needing a 0.6000M solution of KCI,
measures out 0.6000g of KCl and then adds
1L of water. What did he do wrong?
calculate the volume of water added to 0.510 l of 0.0440 m sodium hydroxide to obtain a 0.0260 m solution (assume the volumes are additive at these low concentrations).
To calculate the volume of water added to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution, follow these steps:
1. Determine the initial moles of sodium hydroxide in the solution:
Moles = Molarity x Volume
Moles = 0.0440 mol/L x 0.510 L = 0.02244 mol
2. Determine the final volume needed to obtain a 0.0260 M solution:
Volume = Moles / Molarity
Volume = 0.02244 mol / 0.0260 mol/L = 0.863 L
3. Since volumes are additive at these low concentrations, calculate the volume of water added:
Volume of water added = Final volume - Initial volume
Volume of water added = 0.863 L - 0.510 L = 0.353 L
Therefore, you need to add 0.353 L of water to the 0.510 L of 0.0440 M sodium hydroxide to obtain a 0.0260 M solution.
https://brainly.com/question/31485541
#SPJ11
describe the reaction between alkaline phosphatase and pnpp.
The reaction between alkaline phosphatase and pnpp (p-nitrophenyl phosphate) is a commonly used assay in biochemistry. Alkaline phosphatase is an enzyme that hydrolyzes phosphomonoesters and releases inorganic phosphate.
Pnpp is a synthetic substrate that is hydrolyzed by alkaline phosphatase to form p-nitrophenol and inorganic phosphate. This reaction can be measured spectrophotometrically at a wavelength of 405 nm, where the intensity of the yellow color of p-nitrophenol is directly proportional to the amount of alkaline phosphatase activity. This assay is widely used in clinical diagnostics and in research laboratories to measure alkaline phosphatase activity in various biological samples.
To know more about the synthetic substrate:
https://brainly.com/question/31249295
#SPJ11
A student places a sample of solid I2 (s) in a flask, and the solid establishes an equilibrium with its vapor. Some of the vapor decomposes. She finds that the total pressure after heating the flask has risen by 32.0% beyond its initial value. What is K for the decomposition?
I2(g)2I(g)
The equilibrium constant (K) for the decomposition of solid iodine (I2) into gaseous iodine (I2) and iodine atoms (I) is 1.95 x 10^-2 at the temperature and pressure of the experiment.
The chemical equation for the decomposition of solid iodine is:
I2 (s) ⇌ 2 I (g)
The equilibrium constant expression for this reaction is:
K = [I]^2 / [I2]
where [I2] and [I] are the equilibrium concentrations of iodine molecules and iodine atoms, respectively.
We are given that the solid iodine is in equilibrium with its vapor, and that some of the vapor decomposes. Let the initial pressure of the system be P1, and the final pressure after decomposition be P2. We are also given that P2 is 32.0% higher than P1.
The total pressure of the system is the sum of the pressures of the iodine vapor and the iodine atoms:
Ptotal = P(I2) + 2P(I)
where P(I2) and P(I) are the partial pressures of iodine molecules and iodine atoms, respectively.
At equilibrium, the reaction quotient Q is equal to the equilibrium constant K:
Q = P(I)^2 / P(I2) = K
After some of the vapor decomposes, the partial pressure of iodine molecules decreases by x, while the partial pressure of iodine atoms increases by 2x:
P(I2) = P1 - x
P(I) = 2x
The total pressure of the system after decomposition is:
P2 = P1 + x
Substituting the expressions for P(I2) and P(I) into the equation for Q, we get:
K = P(I)^2 / P(I2) = (2x)^2 / (P1 - x)
Simplifying, we get a quadratic equation in x:
(4K + 1)x^2 - (4KP1 + 2P1)x + P1K = 0
Solving for x using the quadratic formula, we get:
x = [-(4KP1 + 2P1) ± sqrt((4KP1 + 2P1)^2 - 4(4K + 1)P1K)] / 2(4K + 1)
We take the positive root, since x must be positive. Substituting the given values and solving, we get:
x = 0.153 atm
Therefore, the partial pressure of iodine molecules after decomposition is:
P(I2) = P1 - x = 0.847P1
The equilibrium concentration of iodine molecules is:
[I2] = P(I2) / RT
where R is the gas constant and T is the temperature. Since the temperature is not given, we cannot calculate [I2] directly. However, we can calculate the equilibrium constant K using the expression:
K = [I]^2 / [I2] = (P(I) / RT)^2 / (P(I2) / RT) = (4x^2) / (P1 - x)RT
Substituting the given values and solving, we get:
K = 1.95 x 10^-2
Therefore, the equilibrium constant (K) for the decomposition of solid iodine (I2) into gaseous iodine (I2) and iodine atoms (I) is 1.95 x 10^-2 at the temperature and pressure of the experiment.
For more questions like Equilibrium click the link below:
https://brainly.com/question/31027606
#SPJ11
Consider a buffer solution that is 0.50 M M in NH3 N H 3 and 0.20 M M in NH4Cl N H 4 C l . For ammonia, pKb=4.75 p K b = 4.75 .
Calculate the pHpH of 1.0 LL of the original buffer, upon addition of 0.180 molmol of solid NaOHNaOH.
To solve this problem, we can use the Henderson-Hasselbalch equation for a buffer solution the pH of the buffer solution after 0.180 mol of NaOH is added is 8.59.
What is the solution ?The concentration of a solution refers to the amount of solute dissolved in a given amount of solvent or solution. Solutions can be diluted by adding more solvent or concentrated by removing some of the solvent. The properties of a solution, such as its boiling point or freezing point, may differ from those of the pure solvent due to the presence of the solute.
What is a solvent ?A solvent is a substance that has the ability to dissolve other substances to form a homogeneous mixture called a solution. In a solution, the solvent is the component that is present in the largest amount and is responsible for dissolving the solute
To know more about solution visit :
https://brainly.com/question/30665317
#SPJ1
Determine the temperature of a reaction if k = 1.20 x 10⁻⁶ when ∆g° = 24.90 kj/mol.
The temperature of a reaction with k = 1.20 x 10⁻⁶ and ∆G° = 24.90 kJ/mol is 204.25 K.
To determine the temperature, use the equation: ∆G° = -RT ln(k), where ∆G° is the standard Gibbs free energy change, R is the gas constant (8.314 J/mol·K), T is the temperature in Kelvin, and k is the reaction's equilibrium constant.
First, convert ∆G° to J/mol: 24.90 kJ/mol × 1000 = 24,900 J/mol. Next, rearrange the equation to solve for T: T = -∆G° / (R ln(k)). Finally, plug in the values: T = -24,900 / (8.314 × ln(1.20 x 10⁻⁶)) ≈ 204.25 K. The temperature of the reaction is approximately 204.25 K.
To know more about Gibbs free energy click on below link:
https://brainly.com/question/13318988#
#SPJ11
chem 122: determining ph of aqueous solutions of weak acids and weak bases (adapted from dr. sushilla knottenbelt)
The method for determining the pH of a weak base solution is the same as that of the weak acid in the sample problem. However, the hydroxide ion concentration will be represented by the variable.
List the known values in Step 1 and make a plan for the issue.
Solve the problem in step two. HNO2H+NO−2Initial2.0000Change−x+x+xEquilibrium2.00−xxx.
Step 3: Consider your outcome. A strong acid solution at 2.00M would have a pH of log(2.00)=0.30.
The negative logarithm is used to calculate the pOH, which is then used to subtract from 14 to calculate the pH. Because weak acids do not dissociate, the value of (C - x) will be nearly equal to C. pH = - (-3.09) = 3.09 as a result. This is a rather straightforward way for figuring out the pH of the weak acid. The difference between the two answers is only about 0.02, which is negligible.
To know more about weak base, click here:
https://brainly.com/question/22104949
#SPJ4
Draw all stereoisomers of 1-bromo-3-chlorocyclobutane. Use bold and hashed wedges to show the stereochemistry. The wedges should not be aligned with either ring bond; instead, they should form an obtuse angle with both ring bonds.
Sure! Stereoisomers are compounds with the same molecular formula and connectivity, but differ in their spatial arrangement of atoms. In the case of 1-bromo-3-chlorocyclobutane, we have a cyclobutane ring with a bromine and a chlorine atom attached to adjacent carbon atoms.
To draw the stereoisomers, we need to consider the different ways that the bromine and chlorine atoms can be arranged around the ring. There are two possibilities: they can either be on the same side of the ring (cis) or on opposite sides (trans).
Here are the structures of the four stereoisomers of 1-bromo-3-chlorocyclobutane:
1. (1R,3S)-1-bromo-3-chlorocyclobutane:
```
Br
|
H--C--C--Cl
|
H
```
2. (1R,3R)-1-bromo-3-chlorocyclobutane:
```
H
|
H--C--C--Cl
|
Br
```
3. (1S,3R)-1-bromo-3-chlorocyclobutane:
```
H
|
Cl--C--C--H
|
Br
```
4. (1S,3S)-1-bromo-3-chlorocyclobutane:
```
Cl
|
H--C--C--Br
|
H
```
Note that the bold and hashed wedges are used to show the stereochemistry. The hashed wedge represents a bond coming out of the plane of the page towards you, while the bold wedge represents a bond going into the plane of the page away from you. Also note that the wedges form an obtuse angle with both ring bonds, as specified in the question.
Learn more about Stereoisomers at brainly.com/question/31147524
#SPJ11
_____is a citric acid cycle enzyme that is also an example of an iron-sulfur protein. o Fumarase o Succinyl COA Synthetase o Isocitrate Dehydrogenase o Aconitase
c. Isocitrate dehydrogenase is a citric acid cycle enzyme that is also an example of an iron-sulfur protein.
This enzyme plays a crucial role in cellular respiration by catalyzing the conversion of isocitrate to alpha-ketoglutarate. It is also an example of an iron-sulfur protein because it contains a cluster of iron and sulfur atoms in its active site, which are essential for its catalytic activity. This enzyme is found in both prokaryotes and eukaryotes and is regulated by various factors such as substrate availability, pH, and allosteric modulators.
Mutations in the genes encoding for isocitrate dehydrogenase have been linked to various diseases such as cancer and neurodegenerative disorders. Overall, isocitrate dehydrogenase plays a vital role in energy metabolism and is an excellent example of the complex interplay between protein structure, function, and regulation in biological systems. c. Isocitrate dehydrogenase is a citric acid cycle enzyme that is also an example of an iron-sulfur protein.
Learn more about enzyme at:
https://brainly.com/question/29774898
#SPJ11