5) You pull a 10.0 kg wagon along a flat road. You exert a force of 80.0 N at an angle of 30.0 degrees above the horizontal while you move the wagon 10.0 m forward. The coefficient of friction between the wagon and road is 0.500. Calculate the work down by you and the work done by friction.

The internal energy after heating in terms of U is 100U.

The given parameters;

Assuming a constant pressure, the internal energy of the ideal gas is equal to the change in the enthalpy of the ideal gas.

[tex]\Delta H = U \times \Delta T\\\\\Delta H = U (200 - 100)\\\\\Delta H = 100 U[/tex]

Thus, we can conclude that the internal energy after heating in terms of U is 100U.

Learn more here:https://brainly.com/question/15517750

The only force opposing the block's sliding as it slows down is friction with magnitude f . By Newton's second law, the net force in this direction is

∑ F = -f = ma = (4.00 kg) a

Assuming constant acceleration a , the acceleration applied by friction is such that

(1.5 m/s)² - (11 m/s)² = 2a (4.00 m)

Solve for the acceleration :

a = ((1.5 m/s)² - (11 m/s)²) / (8.00 m) ≈ -14.8 m/s²

Then the frictional force exerted a magnitude of

-f = (4.00 kg) (-14.8 m/s²)

f ≈ 59.4 N

and was directed opposite the block's motion.

Answer:

[tex]E=mgh[/tex]

[tex]m=3kg[/tex]

[tex]h=4m[/tex]

[tex]g=9.8m/s^{2}[/tex]

[tex]E= 3*4*9.8=117.6J[/tex]

Explanation:

Only substitute amounts to formula.

Hope this helps ;)

Cheers :D

Answer:

Explanation:

Average speed is total distance traveled over the time needed to do so.

d = vt

v = (1.0(3.0) + 1.6(5.0) + 1.4(4.0) / (3.0 + 5.0 + 4.0)

v = 16.6 / 12

v = 1.383333333...

v = 1.4 m/s

The potential difference between the initial and final point is 3.0 V.

The given parameters:

The potential difference between the initial and final point is calculated as follows;

[tex]E = \frac{V}{d} \\\\\frac{V_1}{d_1} = \frac{V_2}{d_2}[/tex]

where:

[tex]d_2[/tex] is the distance of the electron between the positive and negative plate

[tex]0.1 + d_2 + 0.05 = 0.2\\\\d_2 + 0.15 = 0.2\\\\d_2 = 0.2 - 0.15\\\\d_2 = 0.05 \ m[/tex]

[tex]V_2 = \frac{V_1d_2}{d_1} \\\\V_2 = \frac{12 \times 0.05}{0.2} \\\\V_2 = 3.0 \ V[/tex]

Thus, the potential difference between the initial and final point is 3.0 V.

Learn more here:https://brainly.com/question/1494836

Following are the calculation to the friction force:

The substring tension force is provided as follows:  

[tex]\to T-m_{1}g=0 \\\\\to T = m_{1}g \\\\[/tex]

       [tex]= (68\ kg) (9.81 \ \frac{m}{s^2} ) (\frac{ 1\ N}{ 1\ kg \cdot \frac{m}{s^2}}) \\\\ = (68 ) (9.81 ) ( 1\ N) \\\\= 667.08\ N \\\\[/tex]

Therefore, the friction force on the box is "667 N".

Learn more:

brainly.com/question/2285391

Answer:

Con el cielo del agua

Explanation:

espero que te ayude

Explanation:

I think this is it, give it a try

Answer:

Explanation:

v² = u² + 2as

s = (v² - u²)/2a

s = (0² - 75²) / (2(-14))

s = 200.8928

s = 200 m

Answer:

Identification

Explanation:

:-;..........

Answer:

Explanation:

I will ASSUME that the struck car was initially at rest. Would not have to be, but a different mass will result if it was

Conservation of momentum

14000(8.1) + m(0) = (14000 + m)(3.6)

14000(8.1) = 14000(3.6) + m(3.6)

m = 14000(8.1 - 3.6) / 3.6

m = 17500 kg

The mass of the second car is 17500 kg.

The law of conservation of momentum asserts that, unless an external force is applied, the total momentum of two or more bodies operating upon one another in an isolated system remains constant. As a result, momentum cannot be gained or lost.

Newton's third law of motion has a direct impact on the idea of momentum conservation.

mass of the first car = 14000 kg.

Initial speed of first car = 8.1 m/s.

Final speed of the two cars = 3.6 m/s.

From law of conservation of momentum; we can write:

Total initial momentum = total final momentum

14000 kg ×8.1 m/s + m×0 = (14000 + m) kg × (3.6 m/s)

14000(8.1) = 14000(3.6) + m(3.6)

m = 14000(8.1 - 3.6) / 3.6

m = 17500 kg

Hence, the mass of the second car is 17500 kg.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ2

Answer:

180 LUV:)

Explanation:

Answer:

4653

4565445655687568677667876

A. psychodynamic is the personality best explains Sam's behavior

The psychology of mental or emotional forces or processes developing especially in early childhood and their effects on behavior and mental states is called psychodynamic .

Since , any behavior  is not genetical or it never get inherited hence it is not biological . This has been  grown with time and this behavior have been grown in Sam by observing his parents doing the same hence correct option should be A. psychodynamic

learn more about psychodynamic

https://brainly.com/question/10373312?referrer=searchResults

#SPJ2

Answer:

Explanation:

F = ma

3(9.81) - 3.8(9.81sin36) = (3 + 3.8)a

a = 1.10566...

a = 1.1 m/s²

the 3.8 kg mass will move up slope and the 3 kg mass will fall at that acceleration.

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{Total\: Displacement }{Total\: time}[/tex]

[tex]\\ \rm\rightarrowtail Avg\: velocity=\dfrac{4}{2}=2m/s[/tex]

The shutter speed that should be used if the lens is changed to f/4.0 is; Choice D: 1/500 s.

The relationship between the shutter speed and the focal ratio is an inverse relationship.

Ratio of Areas = 5.6²/4²

Since; T1A1 = T2A2

In essence; when the focal ratio is reduced as in this case; from f/5.6 to f/4.0; the shutter speed is increased.

Ultimately, the shutter speed of the camera in discuss increases to; 1/500 s.

Read more:

https://brainly.com/question/13083614

Answer: Even though the genetic susceptibility plays a crucial role on the IQ of the individual, various modifiable environmental factors like education, premature birth, nutrition, pollution, drug and alcohol abuse, mental illnesses, and diseases can have an influence on an individual's IQ.

Answer:

v=u+at

v= 10+100×10

v = 10+1000

v = 1010 m/s

Answer:

Explanation:

350 cm / 25 cm = 14 radians

14 rad / 2π rad/rev = 2.23 revolutions

The center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

The given parameters:

The center of gravity of the two particles when first particle is fixed is calculated as;

[tex]C_G = \frac{m(0 ) \ +2m(L) }{m+ 2m} \\\\C_G = \frac{2mL}{3m} \\\\C_G = \frac{2L}{3}[/tex]

The center of gravity of the two particles when second particle is fixed is calculated as;

[tex]C_G = \frac{m(L) \ + \ 2m(0)}{m + 2m} \\\\C_G = \frac{mL}{3m} \\\\C_G = \frac{L}{3}[/tex]

Thus, the center of gravity of this two particle system is located 1/3 distance away from 2 m and on the line joining the two particles.

Learn more about center of gravity here: https://brainly.com/question/874205

Answer:

Critical angle is a angle of incidence, for which refraction is 90 degree, this is a least angle of incidence at which total reflection takes place, please mark me Brainliest

Answer:

Transmission

Explanation:

It’s the passage of electromagnetic waves through a medium.

The passage of a wave through a medium is known as transmission.

The transmission of waves may be characterized as a wave traveling through a medium or into a new medium. Not all waves transmit through the same materials. It significantly depends on the type of wave, the type of material, and even the frequency of the wave.

Transmission is generally the passage of electromagnetic radiation through a medium. While Reflection is the process by which electromagnetic radiation is returned either at the boundary between two media (surface reflection) or at the interior of a medium (volume reflection).

Waves can go through things. Waves go through water, light can pass through the glass, and sound can pass through walls. The material the wave passes through is called a medium. A single disturbance passing through a medium is called a pulse.

Therefore, the passage of a wave through a medium is known as transmission.

To learn more about the Transmission of the wave, refer to the link:

https://brainly.com/question/27844842

#SPJ6

Given our understanding of the situation, for this vehicle with four wheels is traveling in a linear path through soft dirt, we would expect for only two wheels to leave tire track impressions.

The vehicle has four wheels, and one might think initially that it makes sense for all four wheels to create tire track impressions on the dirt. This assessment is correct, all four tires will create impressions, However, not all four tires will leave a said impression.

This is due to the fact that as the vehicle advances, the tires in the back will erase the impressions left by the front tires. Therefore, only two tire track impressions will be left.

To learn more visit:

https://brainly.com/question/14443145?referrer=searchResults

Answer:

The axis of rotation of the Earth is tilted at an angle of 23.5 degrees away from vertical, perpendicular to the plane of our planet's orbit around the sun. The tilt of the Earth's axis is important, in that it governs the warming strength of the sun's energy.

Explanation:

can i get brainliest

Answer:

138

Explanation:

(since there's a blank next to "9x y j", I'm assuming the y of F(x, y) is 9x[tex]\sqrt{y}[/tex] j)

1) find the partial derivative of each:

[tex](6y^{\frac{3}{2} })i + (9x\sqrt{y} )j[/tex]  

 [tex]f_{x} =(6y^{\frac{3}{2} })_{x} = \int\limits{6y^{\frac{3}{2} }} \, dx = 6xy^{\frac{3}{2} } +c \\\\f_{y} = (9x\sqrt{y} )_{y} = \int\limits{9xy^{\frac{1}{2} } } \, dy = 9x(\frac{2}{3} )y^{\frac{3}{2} } +c = 6xy^{\frac{3}{2} } +c[/tex]

2) use partial integrals to make gradient of f:

take whatever you got from partial integral and add them together (if they repeat, just use it once)

[tex]F =[/tex] Vf (V = gradient of)

[tex]F(x, y) = 6xy^{\frac{3}{2} }[/tex]

3) Evaluate the integrals with given points:

Integral of F dotted with dr = F(point B) - F(point A) = F(3, 4) - F(1, 1)

[tex]F(point B) = 6(3)(4)^{\frac{3}{2} }\\F(Point A) = 6(1)(1)^{\frac{3}{2}}\\F(point B) - F(pointA) = 6(3)(4)^{\frac{3}{2} }-(6(1)(1)^{\frac{3}{2}})[/tex]

= 144 - 6 = 138 units of work

Work done by the force field F in moving an object from A to B = 138 J

Given data :

Force field F(x,y) = [tex]6y^{\frac{3}{2} }i + (9x\sqrt{y} ) j[/tex]  

Step 1 : determine the partial derivatives of the vector quantity

Fx = ∫ [tex]6y^{\frac{3}{2} }i = 6xy^{\frac{3}{2} } + c[/tex]

Fy = ∫ [tex](9x \sqrt{y})_{y} = 9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]

Equating the partial derivatives :  

[tex]9x(\frac{2}{3})y^{\frac{3}{2} } + c[/tex]  = [tex]6xy^{\frac{3}{2} } + c[/tex]

therefore the gradient of F  i.e. F = vF  = F( x,y ) = [tex]6xy^{\frac{3}{2} }[/tex]

Next step : Determine the work done

Work done ( F.dr ) = [ F(point b ) = F( 3,4 ) ]  - [ F(point A) = F( 1,1 ) ]

F(3,4 ) = 6(3)(4)[tex]^{\frac{3}{2} }[/tex]  = 144

F( 1,1 )  = 6(1)(1)[tex]^{\frac{3}{2} }[/tex]    = 6

Therefore the work done by the force field = 144 - 6 = 138 J

Hence we can conclude that the work done by the force field F is = 138 J

Learn more about work done : https://brainly.com/question/21854305

Answer:

972 J

Explanation:

At the bottom, all the gravitational potential energy was converted into kinetic energy. If you calculate the GPE, its value will be the same that the KE at the bottom. The GPE can be calculated this way:

GPE = mass×gravity×heigth

GPE = 2.2×9.8×45.08 ≈ 972

At the equilibrium position of the spring, the mass has kinetic energy

1/2 (1.00 kg) (0.0400 m/s)² = 0.000800 J = 0.800 mJ = 800 µJ

and when the spring is maximally compressed, this kinetic energy is converted into potential energy.

The maximum spring potential energy of the simple harmonic motion is approximately 7.48 millijoules.

To find the maximum spring potential energy (Us) in simple harmonic motion, we need to determine the maximum displacement (A) of the mass from its equilibrium position.

In simple harmonic motion, the maximum displacement is equal to the amplitude of the oscillation.

The formula for maximum displacement (A) is given by:

A = v0 / ω

where v0 is the initial velocity (4.00 cm/s) and ω is the angular frequency of the oscillation.

The angular frequency (ω) is given by:

ω =[tex]\sqrt{(k / m)[/tex]

where k is the spring constant (9.00 N/m) and m is the mass (1.00 kg).

Substitute the values:

ω = [tex]\sqrt{(9.00 N/m / 1.00 kg)} = \sqrt{9.00 rad/s[/tex] ≈ 3.00 rad/s

Now, calculate the maximum displacement:

A = 4.00 cm/s / 3.00 rad/s ≈ 1.33 cm

Next, calculate the maximum spring potential energy:

Us =[tex](1/2) * k * A^2[/tex]

Us = (1/2) * 9.00 N/m * [tex](1.33 cm)^2[/tex]≈ 7.48 mJ

To know more about spring potential energy, here

brainly.com/question/29510087

#SPJ2

--The compleete Question is,  A 1.00 kg mass is connected to a spring with a spring constant of 9.00 N/m. If the initial velocity is 4.00 cm/s and the initial displacement is 0.00 cm, then what is the maximum spring potential energy of the simple harmonic motion--