5. What type of chemical reaction is shown?
1 point
2 AgNO3 + CuCl2
-
2 AgCl + 2 Cu(NO3)2
Synthesis
Decomposition
Singe Replacement
Double Replacement
Combustion

Answers

Answer 1

Answer:

double Replacement

Explanation:

The mutual replacement of radical and ions between the two compounds or molecules is called double replacement.

General equation : AB+CD = AD +B


Related Questions

A weather reporter describes a large area of air that has the same temperature and air pressure . What is the reporter describing ?

Answers

Answer:

air mass

Explanation:

Remember, the weather of a particular location is often a description of the atmospheric condition of that particular place.

Indeed, the definition of an air mass fits the reporter's description above. As the name implies, a particular air mass would represent the temperature characteristics of a particular area that has a constant or the same temperature and air pressure.

An 84% efficient single pulley is used to lift a 230 kg piano 3.5 m. How much work must be input?

Answers

Answer:

35%

Explanation:

win

The amount of work required to lift the 230 kg to a height of 3.5 m at  84% efficiency is 9391.67 J

What is efficiency?

This can be defined as the capacity to achieve a given task with little or no waste. Mathematically, it can be expressed as

Efficiency = (output / input) × 100

How to determine the work output Mass (m) = 230 KgHeight (h) = 3.5 mAcceleration due to gravity (g) = 9.8 m/s²Work output =?

Work output = mgh

Work output = 230 × 9.8 × 3.5

Work output = 7889 J

How to determine the work input Output = 7889 JEfficiency = 84% Input =?

Efficiency = (output / input) × 100

84% = 7889 / input

Cross multiply

84% × input = 7889

Divide both side by 84%

Input = 7889 / 84%

Input = 7889 / 0.84

Input = 9391.67 J

Learn more about efficiency:

https://brainly.com/question/2009210

#SPJ2

How do the meetings of the words exercise and fitness differ?

Answers

exercise is the activity and fitness is a lifestyle and done with time

Define time period. Give its formula. ​

Answers

Answer:

Part A

Time period, designated by the symbol, 'T', is defines as the time it takes for a complete cycle of an oscillation or vibration (of a wave) to transit through a given point.

The longer the time period of a wave, the lower the frequency of the wave

The unit of the time period is seconds, 's'

Part B

Mathematically, the formula for the time period is presented as follows;

f = 1/T

∴ T = 1/f

f = v/λ

∴ T = λ/v

Where;

v = The velocity of the wave;

λ = The wavelength of the wave

Explanation:

A person weighs 60 kg. The area under the foot of the person is 150 cm2. Find the pressure exerted on the ground by the person. (Take g 10m/s2)

Answers

Answer:

40000 N/m²

Explanation:

Applying,

P =  F/A................... Equation 1

Where P = Pressure, F = Force, A = Area.

From the question,

The force(F) exerted by the person's foot is thesame as it's weight.

F = W = mg............ Equation 2

Where m = mass of the person, g = acceleration due to gravity.

Substitute equation 2 into equation 1

P = mg/A................ Equation 3

Given: m = 60 kg, g = 10 m/s², A = 150 cm² = (150/10000) m² = 0.015 m²

Substitute these values into equation 3

P = (60×10)/0.015

P = 600/0.015

P = 40000 N/m²

when two capacitors are connected in series, the effective capacitance is 2.4muF and when connected in parallel, the effective capacitance is 10muF. calculate the individual capacitances.​

Answers

Answer:

let one capacitor be x and other be y

[tex]in \: parallel \: connection : \\ \frac{x + y}{xy} = 10 \times {10}^{ - 6} - - - (a) \\ in \: series \: connection : \\ x + y = 2.4 \times {10}^{ - 6} - - - (b) \\ in \: (a) : \\ \frac{2.4 \times {10}^{ - 6} }{xy} = 10 \times {10}^{ - 6} \\ xy = 0.24 - - - (c) \\ from \: (b) : \\ y = (2.4 \times {10}^{ - 6} ) - x \\ \therefore \: in \: (c) : \\ x(2.4 \times {10}^{ - 6} - x) = 0.24 \\ 2.4 \times {10}^{ - 6} x - {x}^{2} = 0.24 \\ {x}^{2} - 2.4 \times {10}^{ - 6} x - 0.24 = 0 \\ x = 0.5 \\ 0.5y = 0.24 \\ y = 0.48 \\ { \boxed{ C _{1} = 0.5 \: farads}} \\ { \boxed{C _{2} = 0.48 \: farads}}[/tex]

PLEASE HELP WITH THIS QUESTION
Which of Newton's Laws is represented in this demo?​

Answers

Answer:

Newton's first law

Explanation:

you see, when an object is in motion, it tends to stay in motion, but in your case, if a object is at rest, it usually stays at rest unless acted upon my an unbalanced force which is pulling card from under the coin extremely quick and because you pulled it extremely quick, the coin isn't light enough to be moved easily with the paper, nor enough friction and speed for the coin to continue sticking onto the piece of paper

A.K.A. the coin is heavy, which is why it did not move with the paper

Answer:

Newton's First Law - Law of Inertia

Explanation:

Newton's First Law, the Law of Inertia mentions that an object at rest will stay in rest until acted by another force. The penny's inertia will cause it to fall directly down into the cup because the magnitude of external force applied by the card will be too meager to have a notable effect.

50cm long copper wire carries 5A current directed towards negative z-axis placed in a region if magneti field of strength 15T applied into the page the magnetic force will be?

Answers

Answer:

Your answer is 37.5 N

Explanation:

Force, F = BIL

F = 15 x 5 x 0.5 = 37.5 N

A hot cube of iron was heated up using 1500 J of thermal energy and was placed in a beaker of water. Before it was heated, the iron cube was 20.0 ˚C. The cube of iron raised the temperature of the water to 45.0 ˚C. If the iron cube has a mass of 133 g, what is the specific heat capacity of iron?

Answers

Answer:

451.13 J/kg.°C

Explanation:

Applying,

Q = cm(t₂-t₁)............... Equation 1

Where Q = Heat, c = specific heat capacity of iron, m = mass of iron, t₂= Final temperature, t₁ = initial temperature.

Make c the subject of the equation

c = Q/m(t₂-t₁).............. Equation 2

From the question,

Given: Q = 1500 J, m = 133 g = 0.113 kg, t₁ = 20 °C, t₂ = 45 °C

Substitute these values into equation 2

c = 1500/[0.133(45-20)]

c = 1500/(0.133×25)

c = 1500/3.325

c = 451.13 J/kg.°C

If the distance between the source of sound and observer is reduced to one half, then
the intensity of sound will become

Answers

Answer:

Let the power delivered by the sound wave be 'P'

Intensity by definition is the power delivered per unit area.

i.e. I =

dA

dP

;

In spherical polar coordinate system dA = r

2

Ω

I =

r

2

Ω

dP

;

I ∝

r

2

1

So if distance increases 3 fold. The Intensity becomes

9

1

times the initial

The process of recovering valuable or useful materials from waste or scrap is called
a.
recycling.
c.
rebuilding.
b.
renewing.
d.
reducing.


Please select the best answer from the choices provided

A
B
C
D

Answers

The answer is A) Recycling. Recycling has to do with finding something valuable amongst trash. For example, in a dumpster, someone may just find a nice painting. Mark as brainliest :)

Answer:

hi

Explanation:

What is the force between two charged objects called ?

Answers

Answer:

Coulomb force

Explanation:

The electric force between charged bodies at rest is conventionally called electrostatic force or Coulomb force. The force is along the straight line joining the two charges.

The drop in potential across a resistor in a circuit is 40 V. What is the current
flowing through the resistor if the resistance is 2.0 0? (use Ohmis law. V = IR

Answers

Answer:

Current, I = 20 Amperes.

Explanation:

Given the following data;

Voltage = 40 V

Resistance = 2 Ohms

To find current flowing through the resistor;

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

[tex] V = IR[/tex]

Where;

V represents voltage measured in voltage.

I represents current measured in amperes.

R represents resistance measured in ohms.

Making current (I) the subject of formula, we have;

[tex] I = \frac {V}{R} [/tex]

Substituting into the formula, we have;

[tex] I = \frac {40}{2} [/tex]

Current, I = 20 Amperes.

which factor is least likely to limit the rate of photosynthesis?

- carbon dioxide concentration

- light intensity

- oxygen concentration

- temperature

Answers

Answer:

oxygen concentration

Explanation:

Which variable is represented by the following symbol? ∑F
a. Normal Force
b. Applied Force
c. Weight
d. Net Force

Answers

The variable represented by that symbol is: d. Net force.

a que velocidad en km/h corrio usain bolt en el capeonato mundial de berlin en 2009 para batir el record mundial de los 100 m planos en 9.58

Answers

Answer:

v = 37.59 km/h

Explanation:

The question says, "how fast in km / h did usain bolt run at the berlin world championship in 2009 to break the world record for the 100m sprint in 9.58".

Distance, d = 100 m = 0.1 km

Time, t = 9.58 s = 0.00266 h

We need to find the speed of the Usain Bolt. We know that,

Speed = distance/time

So,

[tex]v=\dfrac{0.1}{0.00266}\\\\v=37.59\ km/h[/tex]

So, the required speed is equal to 37.59 km/h.

1. A boat is floating on the water.
One of the forces acting on the boat is the weight. This is the force of the Earth on the boat.
a
State the other force in this interaction pair.
(1 mark)

Answers

Answer:

Gravity

Explanation:

Because without gravity thee would be no boat floating on water

A bus start from rest the aaceleration of the bus after 5 seconds become 10m/s2 find the final velocity of the bus

Answers

Answer:

The final velocity is 50 m/s.

Explanation:

Below is the calculation of velocity:

v = u + a*t

v = final velocity

u = initial velocity

a = accreleration

Since, u = 0, a = 10m/s^2, and t = 5 seconds. Now plug these values in the formula.

v = u + a*t

v = 0 + 10 x 5

v = 50 m/s

The final velocity is 50 m/s.

1. What is the voltage if a resistance of 25 produces a current of 250
amperes?

Answers

         The relationship between electric current and potential difference is stated by Ohm's law. Most conductors' current is directly inversely proportional to the voltage applied to them. German physicist Georg Simon Ohm was the first to empirically confirm Ohm's law.

What is the unit of Ohm's law?

The expression for Ohm's law is V I. As a result, V = RI, where R is the resistance constant. R is influenced by the conductor's material, size, and other factors. Ohm () is its SI unit.

      Ohms to volts conversion using the formula watts volts = watts ohms. or.

V = √W × Ω Example.

Given that,

  Voltage (v) = 250 V          

  Resistance (R) = 25 Ω,

   Determine current (I) =?

 We know that from ohm's law

 V = I R    

  I = V/R

  I = 250 / 25

  I = 10 A

Current in the circuit is 10 Amps.

To Learn more About Ohm's law, Refer:

https://brainly.com/question/14296509

#SPJ2

What energy transformation takes place when you stretch a bungee cord?

A.
Kinetic energy transforms into potential energy.

B.
Mechanical energy transforms into sound energy.

C.
Elastic energy transforms into kinetic energy.

D.
Potential energy transforms into elastic energy.

Answers

Answer:

D.Potential energy transforms into elastic energy.

A bat is flying at 0.6 m/s when it spots an appetizing insect. The bat accelerated at a rate of 1.2m/s2 for 1.9
seconds. How fast is the bat traveling at the time?

Answers

Answer:

v_f = 2.9m/s

Explanation:

v_f = v_I + a(t)

v_f = 0.6m/s + 1.2m/s²(1.9s)

v_f = 2.88m/s

v_f = 2.9m/s

Felipe drives his car at a velocity of 28 m/s. He applies the brake, which slows the vehicle down at a rate of 6.4 m/s2 and causes it to slow to a stop. How long does it take for the car to stop? Round your answer to the nearest tenth.

Answers

Answer:

Explanation:

Use the one-dimensional equation

[tex]v_f=v_0+at[/tex] where v is the final velocity, v0 is the initial velocity, a is the acceleration, and t is the time it takes to reach that final velocity. We are solving for t. Filling in the other values:

0 = 28 + (-6.4)t and

-28 = -6.4t so

t = 4.4 seconds

Answer:

4.4

Explanation:

The temperature of an ideal gas in a sealed 0.40m3 rigid container is reduced from 350 K to 270 K.The final pressure of the gas is 60 kPa. The molar heat capacity at constant volume of the gas is 28.0 J/(mol K). The heat absorbed by the gas is closest to

Answers

Answer:

The answer is below

Explanation:

Given that the volume (V) = 0.4 m³, temperature difference (ΔT) = 270 K - 350 K = -80 K, pressure (P) = 60 kPa = 60000 Pa, R = 8.314 J/molK

Since we have constant volume, we can use the final state parameters to calculate the number of moles using the ideal gas law:

[tex]PV=nRT\\\\n=\frac{PV}{RT} =\frac{60000*0.4}{8.314*270} =10.69\ moles[/tex]

Given that the molar heat capacity at constant volume ([tex]C_v[/tex]) = 28.0 J/(mol K), the heat absorbed (Q) is:

[tex]Q=nC_v\Delta T=10.69*28*(-80) = -23945.6\ J\\\\Q=-23.95\ kJ[/tex]

Q ≈ -24 kJ

You plan to use a slingshot to launch a ball that has a mass of 0.019 kg. You want the ball to accelerate straight toward your target at 23 m/s2. How much force do you need to apply to the ball?

Answers

Answer:

Explanation:

this is a simple application of Newton's 2nd Law: F = ma.

F = .019(23) so

F = .44 N

You would need to apply a force of 0.437 Newtons to the ball in order to achieve the desired acceleration of 23 m/s².

Force is a physical quantity that describes the interaction between objects or systems and their ability to change motion or shape. It is a vector quantity, meaning it has both magnitude and direction. Force can cause an object to accelerate, decelerate, or change direction.

According to Newton's second law of motion, force is directly proportional to the mass of an object and the acceleration it experiences. The equation F = m × a represents this relationship, where F is the force, m is the mass of the object, and a is the acceleration.

Force can be measured in various units, such as Newtons (N) in the International System of Units (SI) or pounds (lb) in the US customary system. Common examples of forces include gravity, friction, tension, compression, and applied forces like pushing or pulling an object.

According to Newton's second law of motion, which states that force (F) is equal to mass (m) multiplied by acceleration (a):

F = m × a

In this case, the mass of the ball is given as 0.019 kg, and the desired acceleration is 23 m/s². Plugging these values into the equation, we can calculate the force:

F = 0.019 kg × 23 m/s²

F = 0.437 kg m/s²

Learn more about Force, here:

https://brainly.com/question/30507236

#SPJ3

Which law is stated below?
All forces exist in action-reaction pairs.
A. Newton's third law
B. Newton's first law
C. Newton's second law
D. The law of inertia

Answers

That would be a, newton’s third law

Answer:

Maybe the answer is Newton's third law

5. How can you help yourself stay motivated to continue with your fitness program and healthy lifestyle once virtual P.E. has ended?

Answers

I don’t like looking unfit so that keeps me motivated to workout

i will mark brainliest if you get it right.

Answers

Answer:

Satellite D

Explanation:

It has more mass

3.
The mass of a regulation tennis ball is 57 g. Typically during a serve the ball is in contact with the tennis racket for 30 ms. If the serve
was measured at 73.14 m/s what impulse was exerted on the tennis ball?
5.5 kg. m/s
7.8 kgm/s
2.3 kg. m/s
4.2 kg. m/s

Answers

The answer is
B:because

need help please... thank u​

Answers

Answer:

the answer from my side is both vertical and horizontal

Answer:

Entirely horizontal

Explanation:

The ball begins the movement with horizontal and vertical velocity, but it is subject to the gravity acceleration, that will break the movement. When it achieves the top of the path, is when the vertical velocity go to 0 and begin to grow in the opposite direction, so in the very top of the path, the velocity is entirely horizontal

1) Use SolidWorks (SW) FEA to apply a bending load of 600 lbf on the right end of the stepped shaft as shown below. This is the same geometry as H01. Estimate stress concentration factor Kt for bending from your FEA. Provide a hardcopy color plot of your FEA showing maximum von Mises stress.

Answers

Solution :

Given :

L = 1 in

d = 0.75 in

D = 1 in

Fillet radius, r = 0.063 in

[tex]$K_{t_{bending}=\frac{\sigma_{FEA_{bending }}}{\sigma_{Nominal_{bending }}}$[/tex]

We know that :

[tex]$\sigma_{b} = \frac{32M}{\pi d^3}$[/tex]

[tex]$\sigma_{b} = \frac{32 \times (2998.63 \times 25.4)}{\pi (0.75 \times 25.4)^3}$[/tex]

    [tex]$=112.27 \ N/mm^2$[/tex]

[tex]$\sigma_{FEA} = 1.3 \times 10^8 \ N/m^2$[/tex]

         [tex]$=1.3 \times 10^8 \times 10^{-6}$[/tex]

         [tex]$=1.3 \times 10^2$[/tex]   MPa

         = 130 MPa

Therefore, the stress concentration factor is :

[tex]$k_t=\frac{130}{112.27}$[/tex]

   = 1.157922

Other Questions
the graphs of f(x) =-2x and g(x)=(1/2)^z are shown Sales $7,270,000 Gross profit $ 1,450,000 Indirect labor $330,000 Indirect materials $195,000 Other factory overhead $90,000 Materials purchased $5,100,000 Total manufacturing costs for the period $6,170,000 Materials inventory end of the period $ 480,000 how much direct material cost Helppppppppppp meeeeeeeeeee Which of the following best describes the relationship between Angle a and angle b in the image below ( Choose all that apply) En trminos de energa, a qu se debe que sea ms difcil detener un camin en comparacin a una bicicleta? Ralphs classroom measures 12 meters in length. What is the length of the classroom in millimeters? A. 11,000 mm B. 12,000 mm C. 12,500 mm D. 13,000 mm Can you guys help me What type of power plant uses plant organic material and soil of plants as well as their waste products to generate electricity? Help fast ill put you brainlest The market interest rate related to a bond is also called the Group of answer choices stated interest rate effective interest rate contract interest rate straight-line rate Mark is building a sandbox inside a play area. How much play area remains outside of the sandbox? Please describe what you look forward to most in your upcoming activities within the DCE. relationship between beauty industries `Please help me with this 4/5v = - 8/7 Roberto has $20 to buy baseballs for his little league team. Each baseball costs $6. How many baseballs Conan he buy? 8. What role do you play to make your brothers and sisters good huma being? Which equation(s) have -4 and 4 as solutions? A. x2 = 8B. x2 + 16 = 0C. 2x2 = 32D. -3x2 = -48E. 6x2 + 56 = -40F 27 - 5x2 = -53 MARKING BRAINLIEST PLS HELPPART 1Read two examples of free verse poetry from those listed below. Read the poems (or portions of the poems if they're long - at least 20 lines), then write what your impression of the poems were. What do you think they were about? How did you feel about the lack of structure such as rhyming and regular verses? How did reading them make you feel? (Click on the links below to read these poems or you can can find them by searching in your browser using the keywords: Example: "e.e. " + "poem title".)PART 2Write your own free verse poem. For a free verse poem, you may want to write a prose paragraph, then break it up into lines that have meaning for you as you write about your subject. You can do several versions. One with long lines, one with short lines, one mixed, and see which is better. You might also change things as you go.Here is a free verse poem by Carl Sandburg:FogThe fog comeson little cat feet.It sits lookingover harbor and cityon silent haunchesand then moves on.Other poems by Carl Sandburg:Buffalo BillUpstairsWildernessYoung BullfrogsLaughing CornWalt Whitman Poems:There was a Child went ForthA Farm-PictureWarble for Lilac-TimeThe TorchA Clear MidnightPoems by Pablo NerudaIn the NightLost in the ForestYou SingPoems by E. E. because it'sLittle TreeSpring Is Deliana thinks she needs to solve 5 6. Do you agree with her? Explain why or why not. find the positive square root of 0.00822649 .6.EE.2c1. Evaluate the following algebraic expression when x = 32xexponet2 + 5x - 10