Answer:
Explanation:
The equation for centripetal force is
[tex]F=\frac{mv^2}{r}[/tex]. We have all the values we need except for the radius. We have the circumference of the circle, though, so we will solve for the radius using that and the fact that C = 2πr:
3.04 = 2(3.1415)r and
r = .484 m, to the correct number of sig fig's.
Now that we have everything we need and isolating the v NOT squared:
[tex]v=\sqrt{\frac{rF}{m} }[/tex] and filling in:
[tex]v=\sqrt{\frac{(.484)(2100)}{905} }[/tex] . This answer will need 2 sig fig's since 2100 has 2 sig fig's in it. That means that the velocity of the test car is
1.1 m/sec
Solve for resistance. I do not get it. Pls help
Answer: I think a
Explanation:
The Doppler shift can be observed when ____________. Check all that apply. Group of answer choices the source of sound moves towards an observer the source of sound moves away from an observer an observer moves towards a stationary sound source an observer moves away from a stationary sound source the observer and sound source move at the same speed in the same direction the observer and sound source move at the same speed towards one another none of these
Answer:
the source of sound moves towards an observe
Explanation:
The Doppler effect is related to waves such as sound or light. the effect causes an increase or decrease in the frequency of sound light or other waves when the souces either move towards or away from the observer. For example the siren of the train to a person on the platform, the redshift seen by astronomers.
Therefore, The Doppler shift can be observed when the source of sound moves towards an observer From a place closer to the observer than the last wave's crest, each consecutive wave crest is sent. Each wave therefore, takes a little less time than the preceding wave to reach the observer.
What is the difference between Mass and Weight?
Why do we use mass instead of weight?
How to keep my family safe during a hurricane?
Answer:
there are many ways
Explanation:
first off get flashlights if power goes out your in trouble second stay indoors if you are traveling and a hurricane alert goes off just go in a carvel or something. 3rd try to get to a shelter if no store near by or if your on a mobile house. 4th board up your windows. 5th get some food(things that have long shelf life) if the house falls and you have no access to your food then its over. 6 get first aid if the hurricane hits your house and its collapses on you and your injured you need treatment. 7th radio the hurricane is 99% of the time going to knock down the internet poles you need updated info on the hurricane.
Explain how frequency and amplitude affect sound vibrations?
Answer:
The larger the amplitude of the waves, the louder the sound. Pitch (frequency) – shown by the spacing of the waves displayed. The closer together the waves are, the higher the pitch of the sound.
Explanation:
At apogee the moon is at its farthest from earth and thus appears smaller than normal. Because of this it has the smallest angular size in the sky at this time. At apogee the moon is at its farthest from earth and thus appears smaller than normal. Because of this it has the smallest angular size in the sky at this time. True False
Answer:
the statement is FALSE
Explanation:
In the movement of celestial bodies the most common orbit is the ellipse, in this the sun orbits or in this case the planet Earth is in a focus and the lighter body rotates around in a closed orbit.
The closest point is called perigee and the farthest apogee, but throughout the movement the kinetic moment must be conserved, so at the farthest point the speed decreases so that the angular momentum remains constant since the radius is greater.
This phenomenon is also described in Kepler's second law as that the areas must be equal in equal periods of time, so the speed decreases when being further from the Earth.
Consequently the statement is FALSE
what is force of gravity
Answer:
On Earth all bodies have a weight, or downward force of gravity, proportional to their mass, which Earth's mass exerts on them. Gravity is measured by the acceleration that it gives to freely falling objects. At Earth's surface the acceleration of gravity is about 9.8 metres (32 feet) per second per second.
A 1 km long train passes through a 2km long tunnel .
How much time does it take to pass it completely
“GIVEN SPEED OF TRAIN = 1KM/Hr”
Answer:
If the tunnel is straight, it will have 2 hours to pass through it
Explanation:
Train speed distance time
1km/hr. 1km. 1hr. 1km/hr. 2km. 2hr
The two scientists who gave us a better understanding of the universe are?
Answer:
I'm pretty sure it is Edwin Powell Hubble and Albert Einstein
Explanation:
f the voltage in a circuit is 80 volts and the resistance is 20 ohms, what is the current?
I = 4 A
Explanation:
From Ohm's law, the voltage is given by
V = IR
or
I = V/R = (80 V)/(20 ohms)
= 4 A
An object moving at a constant velocity will always have a
Answer:
It will always have a zero acceleration
hmm.....................
Answer:
could you please translate this
Explanation:
may try to help
Answer:
hmm
Explanation:
AMIAMO, MO SHINDAUO
I WILL MARK YOU THE BRAINLIEST NO LINKS
An upward force applied by a fluid on an object in the fluid is the
Archimedes Principle
Hooke's Law
buoyant force
spring force
Answer:
buoyant force
Explanation:
just trust meeee
Answer:
C
Explanation:
Write a short paragraph about Fruit and Seed formation of Strawberry plants.
As elevation increases, temperature decreases. At which elevation will sound travel fastest? 500 meters 1,000 meters 1,500 meters 2,000 meters
Answer:
500 meters
Explanation:
Sound travels faster in warmer air because the air particles have more kinetic energy. The highest temperature air is found at the lowest altitude, therefore 500 meters is the elevation that sound travels the fastest from the options provided.
Answer:
500 meters
Explanation:
Please urgent science question explaining needed
Answer:
what is the question? there isn't one
which way would 2 negatively charged balloons naturally move? what would that do to the amount of potential energy stored in the field?
Answer:
gsg
Explanation:
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
What is force of repulsion?The basic principle of charges is that, two like charges repel and unlike charge attracts. That is: two negative charged bodies or two positively charged bodies will repel each other and one negative charged body attracts a positively charged body.
In both cases attraction or repulsion the charged particles exerts a force with each other called the electrostatic force. The electrostatic force between two charges is directly proportional to the magnitude of charges and inversely proportional to the distance between them.
The balloons with negative charges moves apart from each other by electrostatic force of repulsion. The potential energy in them increases as they move away.
Find more on electrostatic repulsion:
https://brainly.com/question/24013868
#SPJ2
(give the answer or I'll report) please solve it with the steps
Answer:
The required elastic potential energy is 0.068J
Explanation:
Given,
Spring force constant, k= 3.4 N/M
Spring stretch length/ Displacement, x= 0.2m
We know,
Elastic potential energy, V= [tex]\frac{1}{2} kx^{2}[/tex]
=[tex]\frac{1}{2}*3.4*(0.2)^{2}[/tex]
=[tex]\frac{0.136}{2}[/tex]
=0.068
∴The required elastic potential energy is 0.068J
What is velocity?
Please don't answer and let joinbrainly answer. Thank you.
Answer:
The rate of change in position of an object with respect to time, and displacement is called velocity.
The primary coil of a transformer has 411 turns; the secondary coil has 1000 turns. An alternating current is sent through the primary coil. The emf in the primary is of amplitude 11.7 V. What is the emf amplitude in the secondary
Answer:
The emf amplitude in the secondary coil is 26.53 V
Explanation:
Given that,
The number of turns of the primary coil of a transformer = 441
The number of turns of the secondary coil of a transformer = 1000
The emf in the primary is of amplitude 11.7 V
We need to find the emf amplitude in the secondary. We know that,
[tex]\dfrac{E_1}{N_1}=\dfrac{E_2}{N_2}\\\\E_2=\dfrac{E_1N_2}{N_1}[/tex]
Put all the values,
[tex]E_2=\dfrac{11.7\times 1000}{441}\\\\E_2=26.53\ V[/tex]
So, the emf amplitude in the secondary coil is 26.53 V.
Un proyectil es lanzado con un ángulo de 30⁰ y una velocidad inicial de 20m/s ¿cual es el punto más alto de su trayectoria? ¿cual es su alcanzar horizontal? ¿cuánto tiempo está en el aire¿
Answer:
Thus, the horizontal range is 17.7 m, and the maximum height is 10.2 m.
Explanation:
velocity of projection, v = 20 m/s
Angle of projection, A = 30 degree
The horizontal range is
[tex]R =\frac{v^{2}sin2A}{g}\\R=\frac{20\times 20\times sin60}{2\times 9.8}\\R=17.7 m[/tex]
The maximum height is
[tex]H =\frac{v^{2}sin^{2}A}{2g}\\H=\frac{20\times 20\times sin^{2}30}{9.8}\\H=10.2 m[/tex]
A student applies a 10 N force to a wood block with a mass of 5 kg. The block is pushed across four different surfaces. The accelerations of the block are recorded. Which surface showed the least friction?
The complete question is as follows: A student is subjected to a reaction force of 10 N northward from a 5 kg block while pushing the block over a smooth, level surface. Ignoring friction, what is the acceleration of the block?
Answer: The acceleration of the block is [tex]2 m/s^{2}[/tex].
Explanation:
Given: Force = 10 N
Mass = 5 kg
It is known that force applied on an object is the product of mass and acceleration.
Mathematically, [tex]F = m \times a[/tex]
where,
F = force
m = mass
a = acceleration
Substitute the values into above formula as follows.
[tex]F = m \times a\\10 N = 5 kg \times a\\a = \frac{10}{5}\\= 2 m/s^{2}[/tex]
Thus, we can conclude that the acceleration of block is [tex]2 m/s^{2}[/tex].
Waves that are completely out of phase will experience destructive interference.
True
or
False
Answer:
True
Explanation:
As far as I know, constructive interference means waves are "in phase" and destructive interference means the waves are "out of phase"
Answer:
true
Explanation:
destructive interference occurs when two identical waves are superimposed exactly out of phase.
The ratio of the number of pigs to the number of horse in a farm is 2 to 3 (2:3), if therected are 24 horses, what is the number of pigs?
Answer:
16 pigs
Explanation:
Let the horses be H.
Let the pigs be P
Let the total number of animals be x.
Given the following data;
Ratio of P to H = 2:3 = 2 + 3 = 5
Number of horses = 24
To find the number of pigs;
First of all, we would determine the total number of animals x.
From the ratio of horse, H:
3/5 * x = 24
Cross-multiplying, we have;
3x = 120
x = 120/3 = 40
Next, we find the number of pigs;
Pigs = 2/5 * 40
Pigs = 80/5 = 16 pigs
Monochromatic light of wavelength lambda, such as light from a laser, is directed through two narrow parallel slits that are a distance d apart. There is a viewing screen a very long distance R away from the slits that is used to observe the interference pattern that emerges from the light shining through the slits. The distance that light travels from one slit to the screen is r1 and the distance that light travels from the other slit to the screen is r2. The central bright fringe of the interference pattern results due to a path difference, r1 – r2, of zero. What path difference is required to produce the first order bright fringe that is adjacent to the central bright fringe?
Answer:
When r1 – r2 equal the wavelength of the monochromatic light
Explanation:
This is because to observe a bright fringe a constructive interference pattern of path difference, r1 – r2 = mλ is observed, where m is an integer and λ = wavelength of monochromatic light.
For bright fringes and thus constructive interference, r1 – r2 must be integral multiples of the wavelength, λ. When r1 – r2 , we have the central bright fringe and thus m = 0.
The first order bright fringe which is adjacent to the central bright fringe is obtained when m = 1,
So r1 – r2 = 1 × λ
r1 – r2 = λ
Thus, the path difference required to produce the first order bright fringe that is adjacent to the central bright fringe is when r1 – r2 = λ, the wavelength of the monochromatic light.
What force is exerted on a machine? output force work input work output input force
Answer:
output force is exerted on a machine
Answer:
output force is exerted in the machine , i guess
What is kinetic energy formula???
Answer :— Kinetic energy is directly proportional to the mass of the object and to the square of its velocity: K.E. = 1/2 m v2. If the mass has units of kilograms and the velocity of meters per second, the kinetic energy has units of kilograms-meters squared per second squared.
[tex] \\ [/tex]
Hope you understand :)
Answer:
Explanation:
Kinetic energy (K.E)=1/2*mass*velocity^2
Q 36 - URGENT HELP PLS
WILL BE MARKED AS BRAINLIEST.
Define greenhouse gases with examples.
Manmade or Natural gases which are contributing to greenhouse effect by absorbing the heat and warming the planet.
These gases are carbon dioxide, methane, water vapor, and nitrous oxide which occur naturally and unnaturally in nature
some examples are like excess and unnecessary use of petroleum products leads to increase the amount of greenhouse gases in nature.
Deforestation and cutting trees also lead to increase the greenhouse gases in environment.
write a short note on Andromeda galaxy.
Answer:
[tex]\sf\pink{Andromeda \: galaxy}[/tex]
The Andromeda is a galaxy which is nearest to the milky way. It is also named as Messier 31 or M31 or NGC 224. It is a spiral galaxy located at a distance of approximately 2.5 million light years from earth.
another name Andromeda in Hindi is Vaikunth.
Explanation:
The Andromeda Galaxy (IPA: /ænˈdrɒmɪdə/), also known as Messier 31, M31, or NGC 224 and originally the Andromeda Nebula (see below), is a barred spiral galaxy approximately 2.5 million light-years (770 kiloparsecs) from Earth and the nearest major galaxy to the Milky Way.
Number of stars: ~1 trillion (1012)
Right ascension: 00h 42m 44.3s