You’re a project manager of a small team looking to hire. You have received many resumes to review, and while most of them look well qualified, two of the resumes are very poorly formatted and use wacky fonts and graphics. Would you consider these individuals as qualified candidates and be willing to interview them? Please justify your answer by briefly summarizing the discussion you might have with these candidates. Consider the following prompts as you develop your post: Explain why professional formatting matters on a resume or explain why it doesn’t. Argue whether we can infer anything about a candidate’s ability to work in a professional environment based on his or her resume’s formatting. Compare how you would address a resume with wacky fonts to how you would respond to grammatical errors in a resume.
No, you never consider those resumes that use wacky fonts and graphics. This is because it is the primary criterion that candidates have to fulfill in the hiring process.
What is the responsibility of a project manager?Project managers are responsible for planning, organizing, and directing the completion of specific projects for an organization while ensuring these projects are on time, on budget, and within scope.
Professional formatting justifies the capabilities and strength of candidates with respect to their qualifications. It increases your chances for the hiring process with the selection of your resumes.
A candidate’s ability to work in a professional environment based on his or her resume’s formatting is significantly based on their curiosity and willingness to do work in the same culture.
To learn more about Professional formatting, refer to the link:
https://brainly.com/question/17971683
#SPJ1
Once a central idea has been determined, then it is possible to identify the main points and decide upon an organizational strategy.
True False
Answer:
Explanation:
Once a central idea has been determined, then it is possible to identify the main points and decide upon an organizational strategy.
two parties are exchanging messages using public key cryptography. which of the following statements describes the proper procedure for transmitting an encrypted message?
two parties are exchanging messages using public key cryptography. The procedure should be,
The sender encrypts the message using the recipient's public key, and the recipient decrypts the message using the recipient's private key.
What is a private key?
A key in cryptography is a piece of data—typically a string of numbers or letters—that is saved in a file and used to encode or decode cryptographic data by being run through a cryptographic algorithm. When using a cryptographic technique to encrypt and decode data, a private key, sometimes referred to as a secret key, is a variable that is employed. Only the key's creator or parties permitted to decrypt the data should have access to secret keys.
When using a cryptographic technique to encrypt and decode data, a private key, sometimes referred to as a secret key, is a variable that is employed. Only the key's creator or parties permitted to decrypt the data should have access to secret keys.
To learn more about a private key, use the link given
https://brainly.com/question/15346474
#SPJ4
Which of the following print options allows you to select different print options before sending the contents of the current object immediately to the printer?
Select one:
a. Quick Print
b. Print
c. Print Preview
d. none of the above
Print options allows you to select different print options before sending the contents of the current object immediately to the printer : Print
What is an print?A print is an image that has been formed on one surface and transferred to another via a repeatable process, allowing the creation of several impressions.A print is a piece of graphic art that the artist intended to be created as an original work of art rather than a replica of another piece of art in a different media. Prints are made by inking or carving an image onto a hard surface, or matrix, such a stone, metal plate, or wooden block.Types of the prints are :Surface Printing.Flexographic Printing.Screen Printing.Rotary Screen.Gravure Printing.Digital Printing.Learn more about print refer to ;
https://brainly.com/question/27962260
#SPJ4
David, a software engineer, recently bought a brand new laptop because his enterprise follows the BYOD (bring your own device) model. David was part of a software development project where the software code was leaked before its release. Further investigation proved that a vulnerability in David's laptop caused the exposure. David insists he never used the laptop to access any network or integrate any devices, and the laptop was kept in a vault while not in use. Which of the following attack vectors was used by the threat actor?
A. Direct Access
B. Wireless
C. Supply Chain
D. Removeable media
The attack vector used by the threat actor is the Supply Chain. The correct option is C.
What is an attack vector?An attack vector is a strategy for breaking into a computer system or network without authorization. The entire number of attack vectors that an can use to influence a network or computer system or extract data is known as the attack surface.
Hacker can take advantage of system weak-nesses, including the human factor, using attack vectors. Viruses, mal-ware, email attachments, webpages, pop-up windows, instant messaging (IMs), rooms, and de-ceit are all common cyber-attack vectors.
Therefore, the correct option is C. Supply Chain.
To learn more about attack vectors, refer to the link:
https://brainly.com/question/27962411
#SPJ4
Write an instruction that adds the value 12 to the value in register $6. Use an instruction which ignores overflow. A. add $6, 12 B. addi $6, $0, 12 C. addiu $6, $6, 12 D. addi $6, 12
Answer:
Explanation:
Write an instruction that adds the value 12 to the value in register $6. Use an instruction which ignores overflow. A. add $6, 12 B. addi $6, $0, 12 C. addiu $6, $6, 12 D. addi $6, 12
when declaring class data members it is best to declare them as . group of answer choices protected members restricted member public members private members
When declaring class data members it is best to declare them as private members. A Java access modifier is a private keyword. It may be used to inner classes, methods, and variables.
It is the sort of access modifier that is most constrained.Only members of the same class have access to the private access modifier.We are unable to make an interface and outer class private.The ideal way to utilize the private keyword in Java is to entirely encapsulate a class by making all of its data members private.Making a class' constructor private prevents others from making instances of that class.Any method that is being overridden must not be more restrictive than the original method, which must be stated in the subclass.To know more keywords click on the below link:
https://brainly.com/question/18257856
#SPJ4
You want to build a new gaming computer but intend to reuse as many of the parts as possible from your old computer. You have determined that the motherboard and the case will be reused, and you will purchase a new graphics card, sound card, network interface card, and a USB 3.0 expansion card to increase your system's overall speed and performance. You are a bit worried that your old computer's power supply may not be able to support all of these new expansion cards. Which of the following cards is MOST likely to consume the most power during operations and require you to purchase a new power supply to support it?
Options are :
O USB 3.0
O Sound card
O NIC
O Graphics card
The graphics card is most likely to consume the most power during operations and require you to purchase a new power supply to support it. Graphics cards are responsible for rendering images and video on a computer
Graphics cards are responsible for rendering images and video on a computer, which is a resource-intensive task that requires a significant amount of power. High-end graphics cards can draw up to 250 watts or more of power, depending on the model and the settings it is running at. In contrast, sound cards, NICs, and USB 3.0 expansion cards generally have much lower power requirements and are not as likely to require an upgrade to the power supply.
It is important to ensure that the power supply in your computer is sufficient to support all of the expansion cards and other components that you are using. If the power supply is not able to provide enough power, it can cause problems such as system instability, random shut downs, and even hardware damage.
Learn more about Graphics cards, here https://brainly.com/question/13498709
#SPJ4
TRUE/FALSE. in addition to other preflight actions for a vfr flight away from the vicinity of the departure airport, regulations specifically require the pilot in command to check the accuracy of the navigation equipment and the emergency locator transmitter (elt). review traffic control light signal procedures. determine runway lengths at airports of intended use and the aircraft's takeoff and landing distance data.
True, As per regulations, the pilot in command must precisely ascertain the runway lengths at airports of intended usage and the aircraft's takeoff and landing distance information before taking off on a VFR flight away from the region of the departure airport.
What is VFR flight ?
Visual flight rules (VFR) in aviation are a collection of rules that a pilot must follow when flying an aircraft in weather that is typically clear enough for the pilot to see where the aircraft is heading.
In particular, the weather has to be better than the minimal requirements for basic VFR flight, or in visual meteorological conditions (VMC), as described in the regulations of the responsible aviation authority.
The pilot must be able to control the aircraft while keeping an eye on the ground and keeping a visual distance from obstacles and other aircraft.
To know more about visual flight rules (VFR), visit: https://brainly.com/question/28151179
#SPJ4
fill in the blank: a data analyst includes in their r markdown notebook so that they can refer to it directly in their explanation of their analysis.
A data analyst includes inline code in their R Markdown notebook so that they can refer to it directly in their explanation of their analysis.
What is inline code?Inline code is a term in many programming language to describe the code that written in the body of program.
R Markdown is a document that contain the text and code. Inline code in R Markdown is to code directly into the text with .Rmd file.
Thus, the given statement is to refer directly to their explanation which is mean the text, so the correct option is inline code because the inline code is a code that can directly into the text.
You question is incomplete, but most probably your full question was
Fill in the blank: A data analyst includes _____ in their R Markdown notebook so that they can refer to it directly in their explanation of their analysis.
Learn more about inline code here:
brainly.com/question/26021537
#SPJ4
tabase recovery, the transaction log shows both before and after images of records that has been modified by insert, delete, or update : T/F
It is true that database recovery, the transaction log shows both before and after images of records that has been modified by insert, delete, or update.
What is database?A database is a collection of data that has been organised to make it simple to manage and update.
Data records or files containing information, including as sales transactions, customer information, financial data, and product information, are often aggregated and stored in computer databases.
Rebuilding a database or table space after an issue such a media or storage loss, power outage, or application failure is known as recovery.
If your database or certain table spaces have been backed up, you can restore them if they are ever corrupted or damaged in any manner.
When a database is recovered, the transaction log displays both the before and after pictures of any records that have been updated, deleted, or inserted.
Thus, the given statement is true.
For more details regarding database, visit:
https://brainly.com/question/29412324
#SPJ4
I am working on 8.3.6 Girl Scout Designation
in JavaScript if anyone has done this lesson please tell me your code i cant seem to figure this out here is the prompt:
Write a program that will determine if a girl scout has reached ‘Gold’ status.
Ask the user for three variables:
- The number of boxes of cookies sold
- The total number of badges they have
- The number of volunteer hours they have worked
(Make sure you ask for the variables in this order!)
A girl scout has reached gold status if they sold at least 100 boxes of cookies, OR they sold at least 50 boxes and have at least 10 badges and have volunteered at least 25 hours. You will need to use both logical and comparison operators here.
Once you determine their status, let them know!
For example, if the user gave the following input:
How many boxes did you sell? 60
How many badges do you have? 12
How many hours have you volunteered? 30
You should respond with the following output:
Is gold status? True
The JavaScript program that determines if a girl scout has reached 'Gold' status is given as follows:
var nBoxes = prompt("How many boxes did you sell?");
var nBadges = prompt("How many badges do you have?");
var nHours = prompt("How many hours have you volunteered?");
var isGold = (nBoxes >= 100) || (nBoxes >= 50 && nBadges >= 10 && nHours >= 25);
alert("Is gold status? " + isGold);
How to write the program?The first step is reading the input variables from the user, using the prompt command.
There are three variables that have to be read, and they are read as follows:
var nBoxes = prompt("How many boxes did you sell?");
var nBadges = prompt("How many badges do you have?");
var nHours = prompt("How many hours have you volunteered?");
Then the conditional is called to verify if the girl scout has achieved gold status or not, as follows:
var isGold = (nBoxes >= 100) || (nBoxes >= 50 && nBadges >= 10 && nHours >= 25);
The alert command just prints if the person has achieved the status or not.
More can be learned about JavaScript programming at https://brainly.com/question/14825779
#SPJ1
you want to compare the average mpg of cars with 4 and 8 cylinders. the null hypotheses of: h null: the average of mpg for cars of 4 cylinders
The four-cylinder engine is smaller, lighter, and more fuel-efficient than the V8, but it typically cannot produce the same amount of horsepower as a V8. A few four-cylinder engines, however, surprisingly outperform a V8 in terms of speed.
Are four-cylinder engines more fuel-efficient?A four-cylinder engine typically has better fuel efficiency than a six-cylinder. Because of its lower horsepower as well as its smaller size and lighter weight, it has better fuel economy.
What is a 4 cylinder's high mileage?Everything depends on how the car has been maintained and driven. At 200,000 miles, some people might want to switch to a high mileage oil, while others might want to change to a high mileage oil at 80,000 miles. For the average driver, anything over 100,000 miles could safely be considered a high mileage vehicle.
To know more about fuel economy visit:-
brainly.com/question/24506260
#SPJ4
Question:-"you want to compare the average mpg of cars with 4 and 8 cylinders. the null hypotheses of: h null: the average of mpg for cars of 4 cylinders"
a license filter in a search engine helps you find images online that you can legally copy for personal or commercial use without paying a fee.T/F
You can find images online that you can legally copy for either personal or commercial use without paying a fee by using a license filter in a search engine.
A license filter is what?
Use the license filter to find images that you are allowed to use, share, or modify for either personal or commercial purposes. The Creative Commons licensing framework is the foundation of this filter. To see image results that are appropriate for your intended use, choose a filter option.
Not filtered by license means what exactly?Not license-filtered: This indicates that you haven't decided on the kind of filter to use to arrange the pictures. In other words, when "not filtered by license" is chosen, all types of photos with all types of licenses are displayed.
To know more about Creative Commons visit:-
brainly.com/question/29247019
#SPJ4
FILL IN THE BLANK a_________ displays a list of commands some of these commands have images next to them so you can quickly associate the command with the image. most menus are located on the toolbar at the top of the screen.
a menu displays a list of commands some of these commands have images next to them so you can quickly associate the command with the image. most menus are located on the toolbar at the top of the screen.
What is a toolbar?
A window's toolbar, which is frequently a bar across the top, contains buttons that, when clicked, perform commands. The taskbar can be moved to the top, either side, or the bottom of the desktop. It often sits at the bottom. You have the ability to relocate the taskbar once it has been unlocked. Many apps have customizable toolbars that you can utilize to keep the commands you use the most visible and accessible. Toolbars are a common addition to dialog boxes.
Frequently used program functionalities are accessible quickly thanks to a toolbar. For instance, a formatting toolbar in Microosooft Exl provides access to features like bolding text or adjusting text alignment with other often-used buttons.
To learn more about a toolbar, use the link given
https://brainly.com/question/11498917
#SPJ4
1. Suppose we have a byte-addressable computer using direct mapping with a 16-bit main memory addresses and 32 blocks of cache, If each block contains 8 bytes, determine the size of the offset field. (direct-16-32-8-offset field)
Words or bytes can be divided into 2s+w addressable units.The block size is 2w words or bytes (cache line width excluding the tag).
How does direct mapping determine block size? 2s+w words or bytes are the total number of addressable units.Block size is equal to 2w words or bytes (cache line width excluding tags). There are 2 blocks in main memory (i.e., all the bits that are not in w).Fully associative mapping allows every line of the cache that is now open for use to map to a block of main memory.Compared to direct mapping, fully associative mapping is more adaptable because of this.The tag is made up of the top 27 address bits.Since the words in the block are located at successive addresses, the complete block only requires a single tag. 16 kB, or 16 * 1024, or 16384 bytes, are available for use.Word has 4 bytes, so 16384 bytes divided by 4 bytes each word is 4096 words.Blocks are 4 words in length, hence there are 1024 (210) blocks in every 4096 words.This indicates that the index uses 10 bits.
To learn more about bytes refer
https://brainly.com/question/14927057
#SPJ4
In database access control area, which of following statement is the best to explain Authentication O Methods to restrict users to access the database system
O Control to access to partial database O verifying whether a user is the claimed user O defining the scope of access O All above mentioned
The best way to describe authentication in relation to database access control is to use the statement that checks to see if a user is who they claim to be.
What does a database employ to regulate user access?Privileges govern every user's access to identified objects under discretionary access control. A privilege is the ability to interact with a specified object in a specific way, such as by querying a table. Users may be granted privileges at the discretion of other users, thus the name "discretionary access control."
Database access control: what is it?Database access control, often known as DB access control, is a technique for limiting unauthorized individuals' access to sensitive data and granting access to user groups that are permitted to view it in order to prevent data breaches in database systems.
To know more about database visit :-
https://brainly.com/question/28964112
#SPJ4
You are building a new computer and want to purchase a motherboard that has integrated town with digital audio output. Which of the following words would you most likely find on the motherboard face plate that indicates digital audio support?
Answer:
The word that you would most likely find on the motherboard face plate that indicates digital audio support is "optical" or "S/PDIF." This refers to the presence of an optical digital audio output, which uses fiber-optic cables to transmit digital audio signals. Other terms that you may see include "HDMI" or "DVI," which refer to digital video interfaces that also support digital audio. It is also possible that the motherboard may have a "TOSLINK" port, which is a type of optical digital audio connector.
It is important to note that having a motherboard with integrated digital audio output does not necessarily mean that it will support all types of digital audio formats. For example, some motherboard may support only basic stereo audio, while others may support more advanced formats such as surround sound or high-resolution audio. Be sure to check the motherboard's specifications and compatibility with your audio system before making a purchase.
Explanation:
You are configuring a new system and want to use a RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. Which of the following actions will you take as part of the configuration?
The action must be take as part of the configuration a new system using RAID 0 array for the operating system is load the RAID drivers during operating system installation.
What is RAID 0?RAID 0 is one type of RAID that can be used in SSD disks including SATA disks or NVME disks. This function it to broken data into stripes and then each stripes will written simultaneously into two or more drives. The RAID 0 is not for redundant data but for increasing the speed.
Since it will broken data into multiple drives, then the RAID 0 drives must be loaded when the operating system is in installation process.
You question is incomplete, but most probably your full question was
You are configuring a new system and want to use RAID 0 array for the operating system using SATA disks and the RAID functionality built into the motherboard. Which of the following actions will you take as part of the configuration?
a. Set master/slave jumpers on the hard drives.
b. Set the disk mode to ACHI in the BIOS.
c. Set the disk mode to IDE in the BIOS.
d. Load the RAID drivers during operating system installation.
Learn more about RAID 0 here:
brainly.com/question/28759241
#SPJ4
enter the name of the file containing the key. key1.txt enter the name of the file containing the student's responses. responsesa.txt question 1 has incorrect answer 'a', the correct answer is 'b'. question 7 has incorrect answer 'a', the correct answer is 'd'. question 12 has incorrect answer 'c', the correct answer is 'b'. 3 questions were missed out of 15. the student grade is 80.00% the student has passed the quiz.
The Student average marks is 80% in the test, So ,the student has passed the quiz test.
How do you determine the average of a group of numbers?
A set of numbers' sum divided by the total number of figures in the data set is referred to as an average in mathematics.
The total data set is thus represented by the Centre number.
Particularly in mathematical or statistical contexts, the median is another term frequently used to refer to an average.
The central tendency of a bunch of numbers in a statistical distribution—which is where the center is located—is measured by the AVERAGE function.
Example: Calculate the average of 9, 5, 1, 9, 6, 2, and 3.
The sum of the numbers is: 9 + 5 + 1 + 9 + 6 + 2 + 3 = 35
By how many numbers there are, divide: 35 ÷ 7 = 5
These numbers have a mean average of 5, or 5.
To know more about AVERAGE function., visit: https://brainly.com/question/24233224
#SPJ4
which of the following is used when a cdma smartphone attempts to connect to the cellular network while traveling? (select any that apply) group of answer choices
When a CDMA smartphone tries to connect to a cellular network while in transit, both PRI and PRL are utilized.
The PRL is used on CDMA networks, contains radio bands, sub bands, and service provider IDs, enables over-the-air updates, and helps your phone connect to the proper tower.
PRI, or Product Release Instructions, updates The radio settings in the PRI, which may include ID numbers, network codes, country codes, and other crucial data, let your phone to connect to the network of the appropriate mobile operator.
To know more about PRL click on the below link:
https://brainly.com/question/14290713
#SPJ4
What is a string of data made up of?
OA. "True" or "false" values
OB. Any set of characters
OC. Numbers only
OD. Numbers or images
A string consists of one or more characters, which can include letters, numbers, and other types of characters.
What is a string explain?A string is a data type used in programming, that is used to represent text rather than numbers. A string is a sequence of characters and can contain letters, numbers, symbols and even spaces. It must be enclosed in quotation marks for it to be recognized as a string.Strings are used for storing text/characters. For example, "Hello World" is a string of characters.He received the nickname “Sting” from one of his Phoenix Jazzmen bandmates because of the black-and-yellow striped sweater he often wore while performing. After graduating in 1974, Sting taught at St. Paul's First School in Cramlington for two years.Strings, which are widely used in Java programming, are a sequence of characters. In the Java programming language, strings are objects. The Java platform provides the String class to create and manipulate strings.
To learn more about string of data refer to:
https://brainly.com/question/20813205
#SPJ1
Answer: B. Any set of characters
Explanation:
did the test
The hr manager of veep communications notices a lot of employees waste valuable time surfing social media websites. the hr manager requests you (a network administrator) to prevent the employees' access to these websites. which of the following firewalls will you use in this scenario?
- stateless firewall
- host based firewall
- application layer firewall
- packet filtering firewall
In this scenario, it would be most appropriate to use a packet filtering firewall to prevent employees from accessing social media websites.
A packet filtering firewall is a type of firewall that operates at the network layer (layer 3) of the OSI model. It works by examining the header information of each incoming and outgoing packet and making a decision to allow or block the packet based on predefined rules. These rules can be based on various criteria, such as the source and destination IP addresses, port numbers, and protocol types.
A packet filtering firewall is well-suited for this task because it can be configured to block packets based on their destination website address. This allows the hr manager to block access to specific social media websites while still allowing access to other websites that may be necessary for employees to do their jobs.
Learn more about packet filtering firewall, here https://brainly.com/question/13098598
#SPJ4
A____is a form of server software that allows nontechnical personnel to create and edit website pages, using any web browser and without complex programming knowledge
A wiki is a form of server software that allows nontechnical personnel to create and edit website pages, using any web browser and without complex programming knowledge.
What is web browser?A web browser is a piece of software used to access websites. When a user requests a web page from a specific website, the browser obtains the page's files from a web server and then displays the page on the user's screen.
On a variety of gadgets, including desktops, laptops, tablets, and smartphones, browsers are used. An estimated 4.9 billion people used a browser in 2020. With a 65% global market share across all devices, Chr0me is the most popular browser, followed by Safàri with 18% of the market.
Although they are frequently confused, a web browser and a search engine are not the same thing. A search engine is a website that offers links to other websites.
Learn more about web browser
https://brainly.com/question/22650550
#SPJ4
suppose you are given a relation R = (A, B, C, D, E) with the
following functional dependencies (CE D, D B, C A)
(a). find all candidate keys
(b). identify the best normal form that R satisfies (1NF, 2NF, .......
BCNF).
(c). If the relation is not in BCNF, decompose it until it becomes
BCNF. At each step, identify a new relation, decompose and re-compute
the key and the normal forms they satisfy
The all candidate keys are:
ABE Yes; ABE+= ABCDE.BCE Yes; BCE+= ABCDE.BDE Yes; BDE+= ABCDE.What is a functional dependency with example?The details of the name of the employee, salary and city are obtained by the value of the number of Employee (or id of an employee). So, it can be said that the city, salary and the name attributes are functionally dependent on the attribute Employee Number.
B) The best normal form that R satisfies:
BDG → AE Yes; BDG+ = BDGECHAF (all attributes), which contains AE.BED → CF Yes; BED+ = BEDCF, which includes CF.CEG → AB Yes; CEG+ = CEGHAB, which contains AB.C) The relation is not in BCNF, decompose it until it becomes BCNF is:
BCD → A Yes; BCD+ = ABCDE, which contains A.ABD → C Yes; ABD+ = ABCDE, which contains C.AB → D Yes; AB+ = ABCDE, which contains D.ABC → D Yes; ABC+ = ABCDE, which contains D.ACE → D Yes; ACE+ = ABCDE, which contains D.CD → B Yes; CD+ = ABCDE, which contains B.See more about Functional Dependecies at brainly.com/question/29142324
#SPJ1
Which of the following is not a fundamental way to approach the creation of a new information system?
a. develop a custom application in-house
b. rely on an external vendor to build the system
c. purchase a software package and customize it
d. rely on end-users to develop it themselves
e. all of these are ways to create new information systems
Answer:
The correct answer is d. rely on end-users to develop it themselves.
All of the other options (a. develop a custom application in-house, b. rely on an external vendor to build the system, and c. purchase a software package and customize it) are common ways to approach the creation of a new information system. These approaches involve hiring professionals or purchasing software packages to design, build, and implement the system.
Option d, relying on end-users to develop the system themselves, is not a fundamental way to approach the creation of a new information system. End-users are typically not trained in the technical skills needed to design and build an information system, and they may not have the necessary expertise or resources to do so. It is generally more effective to rely on professionals or pre-existing software packages to create a new information system.
Assume that there are two text input elements named val1 and val2. Write the JavaScript code to get the value from these elements and convert them to numeric (integer) values. Then add the two values together and store the result in the innerHTML property of the paragraph having and id of varOut.
The parseInt() function (or method) in JavaScript is used to transform a parameter or value that is handed in as a string into an integer value.
Which function is applied when a number is converted to an integer?To turn a number into an integer in Excel, utilize the INT function. When a number is entered, the function truncates any decimal values to the closest integer. The INT function, for instance, can be used to round a number up or down.
How can I convert a string in JavaScript to an integer?JavaScript uses the parseInt(), Number(), and Unary operator(+) functions to convert strings to integers. When the string lacks a number, the parseInt() function returns Nan (not a number).
To know more about JavaScript visit:-
https://brainly.com/question/28448181
#SPJ4
NASAA has the power to set record retention rules for a State-Registered Adviser that cover which of the following records?
Financial assets NASAA held by foreign financial institutions for clients.
USA 2002 Rule 502 (c) An Investment Advisory Contract's Contents [Introduction] If the claimed activity is fraudulent, the restrictions of this subsection apply to federally covered investment advisers.
Which of the following is against NASAA regulations for an advising contract?The ideal response is B. An advisory contract's "liquidated damages provision" would specify that the adviser is liable if the client incurs losses.
What is the model rule for NASAA?Investment adviser representatives will be better equipped to assist their clients if they are knowledgeable about current regulatory compliance standards and best practises in their areas of specialisation, according to William R.
To know more about NASAA visit:-
https://brainly.com/question/17030439
#SPJ4
Which of the following processes can simulate nearly all colors by combining the four primary colors and is used to print an ad in full color?
O stripping O trapping O kerning O cmyk printing O color bleeding
The processes can simulate nearly all colors by combining the four primary colors and is used to print an ad in full color is CMYK printing.
What is CMYK?CMYK or cyan, magenta, yellow, key is a primary color in printing. These colors are four primary colors so it can be mixed with each other to create new colors when the printing process occurs to produce colors that are far more accurate for printing than RGB.
Since in the question is said about combining the four primary colors to used in printing, so the correct option is CMYK printing.
Learn more about CMYK here:
brainly.com/question/29462558
#SPJ4
An incident response team is following typical incident response procedures. Which of the following phases is the BEST choice foranalyzing an incident with a goal of identifying steps to prevent areoccurrence of the incident?answer choicesPreparationIdentificationEradicationLessons learned
You should analyze an incident during the lessons learned stage of incident response with the goal of identifying steps to prevent reoccurrence.
What is lessons learned stage ?
The knowledge acquired via the project-management process is known as lessons learned. Both the advantages and disadvantages are included. It's important to avoid making the same mistakes again and to build on what worked before.
Support Your Team Examples Set reasonable timeframes for jobs and assign them properly. Clear Communication To maintain open lines of communication, check in frequently with the team.
Why are lessons learned important?
The ultimate goal of documenting lessons learned is to pass on knowledge to future project teams that can boost effectiveness and efficiency and build on the experience that has been gained by each completed project.
Learn more about lessons learned stage
brainly.com/question/29585474
#SPJ4