Work is characterized as a force that causes an object to move or be displaced. The work done would be 455040.
What is Work?Work is the scalar product of the force acting on an object and the displacement that force causes when the force is constant.
Despite the fact that work lacks a direction due to the scalar product (or dot product) aspect of vector mathematics, force and displacement are both vector quantities.
"W" stands for work, "F" is the force, and "d" represents displacement (or the distance the object travels).
Therefore, Work is characterized as a force that causes an object to move or be displaced. The work done would be 455040.
To learn more about work, refer to the link:
https://brainly.com/question/18094932
#SPJ1
Written problem: I find that I can blow 1000 cm3 of air through a drinking straw in 1.3 s. The diameter of the straw is 5 mm. Find the velocity of the air through the straw.
Answer:
Below
Explanation:
Diameter of straw = .5 cm then the radius = .25 cm
AREA of the straw = pi r^2 = pi ( .25 cm)^2 = .19635 cm^2
Now we need to find the LENGTH necessary to have a volume of 1000 cm^3
1000 cm^3 = L * . 19635 cm^2
L = 5.092.958 cm <=== your blowing covers this distance in 1.3 s
5092.958 cm / 1.3 s = 3917.7 cm / s = 39.2 m/s
Evaluate the numerical value of the vertical velocity of the car at time t=0. 25s using the expression from Part D, where y0=0. 75m, α=0. 95s^−1, and ω=6. 3s^−1
The numerical value of the vertical velocity of the car at time t=0 is 4.91 meters per second.
Given,
t = 0.25 s
y = 0.75 m
α = 0.95 rad/s²
ω = 6.3 rad/s
Wf=6.54 rad/sec
V=wr
6.54*0.75
V=4.91 m/s
The classic example of independent motions along different axes is projectile motion. Projectile motion is the combination of two separate linear motions. The horizontal motion doesn’t affect the vertical motion, and vice versa. Since there is no acceleration in the horizontal direction (ignoring air resistance), the projectile moves with constant velocity in the x direction.
If an object slides down a friction less plane inclined at angle θ, the acceleration down the plane is g sin θ, because the component of g (the downward acceleration due to gravity) that points along the plane is g sin θ. (There is no acceleration perpendicular to the plane because the normal force from the plane cancels the component of the gravitational force perpendicular to the plane.
Another type of 2-D motion is circular motion. If an object is moving in a circle of radius r with speed v at a given instant, then the (inward) radial component of the acceleration vector a equals. This radially inward acceleration is called the centripetal acceleration. If additionally the object is speeding up or slowing down as it moves around the circle.
To know more about vertical velocity here
https://brainly.com/question/27917951
#SPJ4
What is a pivot arm lever?
The forearm serves as the lever arm, while the elbow serves as the pivot. In spite of the forearm's weight and whatever additional weight the hand may be bearing, the biceps muscle exerts the force and bends the forearm. Compared to the effort, the weight is further from the pivot.
A moving bar that pivots on a fulcrum fastened to a fixed point is the lever. The lever works by exerting forces at various angles in relation to the pivot or fulcrum. Ones farther from this pivot move more quickly than points closer to it when the lever revolves around the fulcrum.
A moving bar that pivots on a fulcrum fastened to a fixed point is the lever. The lever works by exerting forces at various angles in relation to the pivot or fulcrum. Ones farther from this pivot move more quickly than points closer to it when the lever revolves around the fulcrum.
For such more question on Pivoted.
https://brainly.com/question/21497963
#SPJ4
Mercury thermometer is not suitable to measure the temperature of very cold place. Why?
The use of a mercury thermometer is not suitable for the purpose of determining the temperature of extremely cold ice because at such low temperatures, mercury transforms into a translucent state, making it impossible to read.
Another reasons why mercury thermometer is not suitable to measure the temperature of the very cold place are:
Since mercury freezes at a temperature of -38.83 degrees Celsius, a mercury thermometer will not work in extremely cold temperatures. We are unable to use a thermometer that contains mercury at low temperatures because the glass could shatter at those temperatures.The body whose temperature we are measuring with the thermometer does not radiate heat in the opposite direction.When exposed to low temperatures, mercury takes on a transparent appearance, making it more challenging to obtain accurate readings.To learn more about mercury thermometer, click here:
https://brainly.com/question/28442913
#SPJ4
An object is dropped from a height of 8 m. At what height will its kinetic energy and its potential energy be equal
At the peak it has the same potential and kinetic energy.
How is kinetic energy calculated?Kinetic energy (K.E.) is inversely proportional to the square of an object's velocity and its mass: K.E. = 1/2 m v2. When a mass is measured in kilograms and a speed is measured in meters per second, the kinetic energy is measured in kilogram-meters squared per second squared.
Kinetic energy and potential energy are equivalent at what height?The velocity will be zero and the ball's displacement will be at its maximum at the highest point of the trajectory. We might state that the energy present is equivalent to the sum of the potential energy.
To know more about kinetic energy visit:-
https://brainly.com/question/15764612
#SPJ4
Why can't we make parallax measurements for most of the stars in our galaxy?
a. Temperature
b. measuring its apparent brightness through two or more color filters and comparing these values
c. most stars are too far away to show a parallax shift
d. 100 times
C. Most stars are too far away to show a parallax shift.we make parallax measurements for most of the stars in our galaxy
What is galaxy?
Galaxy is a term used to describe a large system of stars, star clusters, interstellar gas, and dust bound together by gravity. Galaxies are often classified by their shape, size, and composition.
The Milky Way, our own galaxy, is a barred spiral galaxy, composed of hundreds of billions of stars and gas, bound together by gravity. Other types of galaxies include elliptical, irregular, and dwarf galaxies. Galaxies are often found clustered together in groups and superclusters, which are some of the largest structures in the universe.
To learn about more galaxy
https://brainly.com/question/13956361
#SPJ4
What is Dynamics flexibility?
The capacity to move joints and muscles throughout their complete range of motion while engaging in active activity is known as dynamic flexibility.
What is meant by dynamic flexibility?The absolute range of motion that a person can acquire through movement is referred to as dynamic flexibility. In other words, the greatest range of motion is the maximum distance that may be reached, bent, or turned. The terms "dynamic flexibility" and "ballistic flexibility" are interchangeable.
Static stretches are those in which you remain in a single position—standing, sitting, or lying still—for up to 45 seconds. Dynamic stretches are regulated motions that get your ligaments, muscles, and other soft tissues ready for action and safety.
Before a workout or any sort of exercise, dynamic stretching is an excellent approach to improve flexibility and engage key muscles.
To learn more about Static electricity refer to:
brainly.com/question/26609519
#SPJ4
how do waves change as they approach the shore the height increases, friction along the top of the wave increases, the wavelength increases, the distance between crests inc
As the waves approach the shore, they slow down, the height of the waves increases and the wavelength decreases.
The ocean floor provides resistance to the waves' troughs as they go closer to the coast. The wave is slowed down by the friction it creates with the ocean floor. The wavelength of the waves is shortened by this friction. The crests rise higher and the troughs deepen as the wavelength shortens.
Friction at the wave's point of contact with the bottom slows it down. The wavelength is reduced as one wave slows down and is caught up to by another. The wave height increases even when the wavelength shrinks because the wave's energy remains constant.
To know more about waves:
https://brainly.com/question/13237598
#SPJ4
Which of the following is a thermodynamic process in which a system returns to the same conditions under which it started?
A) a cyclic process
B) an adiabatic process
C) an isovolumetric process
D) an isothermal process
A cyclic process is a thermodynamic process where the initial and final states are identical. As a result, both the system's initial and end internal energies are constant. As a result, the system's capacity to absorb heat is determined by the work it performs during a cycle.
What is a Thermodynamic Process?A thermodynamic process is one that modifies the system's thermodynamic state. A transition from an initial to a final state of thermodynamic equilibrium characterizes a change in a system. The actual course of the process is not the main focus in classical thermodynamics and is frequently disregarded.
There are several different types of thermodynamic processes, such as (a) isothermal, in which the system's temperature stays constant; (b) adiabatic, in which no heat is exchanged; (c) isobaric, in which the system's pressure stays constant; and (d) isochoric, in which the system's volume stays constant.
To learn more about Thermodynamic process from given link
https://brainly.com/question/30101601
#SPJ4
A grocery shopper tosses a(n) 9.0 kg bag of rice into a stationary 19.1 kg grocery cart. The bag hits the cart with a horizontal speed of 6.7 m/s toward the front of the cart. What is the final speed of the cart and bag
The speed with which the cart and bag move after the collision is equal to 2.14 m/s.
Given the following data:
Mass of bag = 9.0 kg
Speed of bag = 6.7 m/s
Mass of cart = 19.1 kg
Speed of cart = 0 m/s (since it is initially at rest or stationary).
To calculate the final speed with which the cart and bag move after the collision:
Applying the law of conservation of momentum, the collision between the cart and bag is given by the formula:
Where:
M is the mass.
V is the velocity.
Substituting the given parameters into the formula, we have;
9.0 × 6.7 + 19.1 × 0 = Vf (9+19.1)
60.3 = vf (28.1)
vf = 60.3/28.1
vf = 2.14 m / s
To know more about speed of the cart visit:
https://brainly.com/question/15104105
#SPJ4
. Suppose a positively charged object A is brought in contact with an uncharged object B in a closed system. What type of charge will be left on object B
Charging by Contact is positive. On object B, a positive charge will remain.
What is Charge?The fundamental physical property of matter, electric charge, exerts a force when kept in an electric or magnetic field. A magnetic field is produced by a moving electric charge, and an electric charge is associated with an electric field. Magnetic and electric fields combine to form the electromagnetic field. The interaction of the charges results in the electromagnetic force, which is the fundamental force in physics. Throughout this session, tell us about electric charges, their types, and their traits.
A scalar quantity is an electric charge. Only when a quantity complies with the laws of vector addition, such as the triangle law of vector addition and the parallelogram law of vector addition, can it be said to be a vector in addition to having a magnitude and direction. In the case of an electric current, the resultant current of these two currents at a junction is an algebraic sum rather than a vector sum. Therefore, despite having magnitude and direction, an electric current is a scalar quantity.
Learn more about Charge from given link
https://brainly.com/question/18102056
#SPJ4
Suppose that the railcar passes by a horn that is emitting a sound with frequency f. Which of the following describes the frequency f PS-10-1-prime.gif that the person on the railcar hears?
A. f PS-10-1-prime.gif > f before passing the horn, f PS-10-1-prime.gif < f after passing it
B. f PS-10-1-prime.gif < f before passing the horn, f PS-10-1-prime.gif > f after passing it
C. f PS-10-1-prime.gif = f before passing the horn, f PS-10-1-prime.gif = f after passing it
D. f PS-10-1-prime.gif > f before passing the horn, f PS-10-1-prime.gif > f after passing it
F PS-10-1-prime.gif > f before passing the horn, f PS-10-1-prime.gif < f after passing it describes the frequency f PS-10-1-prime.
Hence, Option A is correct.
The Doppler effect causes the frequency heard by the railcar passenger prior to passing the horn to be higher than the real frequency of the sound released, whilst the frequency heard after passing the horn is lower than the actual frequency. This is why the answer to this question is A. A railcar is a self-propelled passenger-carrying railroad vehicle. A train with a single coach and a driver's cab at one or both ends is typically referred to as a "railcar." Such vehicles are referred to as "railmotors" by several railway companies, including the Great Western.To know more about railcars here
https://brainly.com/question/14652521
#SPJ4
If your vehicle plunges into deep water, but does not sink immediately, you should escape through a:
If this situation ever happens, you should always try to escape through an open window first because it is your best option.
How do you classify a vehicle?There are several ways to categorize automobiles; in North America, trucks and passenger vehicles are separated by rated rating and total interior capacity, respectively (GVWR). In the European Union, vehicle segments employ linear metrics to represent size.
Why are vehicles important?The private automobile has changed contemporary civilization for more than a century by enabling autonomy and freedom of movement. Due to the growing distances between places like home, work, educational establishments, retail malls, and recreational facilities, mobility has become more and more crucial.
To know more about Vehicles visit:
https://brainly.com/question/8860896
#SPJ4
A spring with a cart at its end vibrates at frequency 5.0Hz\;Hz .
A. Determine the period of vibration.
B. Determine the frequency if the cart's mass is doubled while the spring constant remains unchanged.
C. Determine the frequency if the spring constant doubles while the cart's mass remains the same.
A. The period of vibration is the time it takes for one complete oscillation to occur. It is the reciprocal of the frequency. The period of vibration can be calculated using the formula:
Period = 1/Frequency
Given that the frequency of vibration is 5.0Hz, the period of vibration is:
Period = 1/5.0 s
Period = 0.2 s
B. If the cart's mass is doubled while the spring constant remains unchanged, the frequency of vibration will not change. This is because frequency is dependent on the spring constant and the mass of the cart and not on the amplitude of the oscillation.
C. If the spring constant doubles while the cart's mass remains the same, the frequency of vibration will also double. This is because frequency is directly proportional to the square root of the spring constant. Therefore, doubling the spring constant would lead to an increase in the frequency of vibration by a factor of square root of 2.
Learn more about Frequency here: https://brainly.com/question/5102661
#SPJ4
Why does torque increase with distance?
Torque increases with distance because torque is defined as the force acting on an object multiplied by the distance from the axis of rotation. The farther the force is applied from the axis of rotation, the greater the torque will be.
To understand this, imagine a lever with a weight on the end of it. If the weight is placed closer to the pivot point of the lever, it will take less force to lift the weight than if the weight is placed farther away from the pivot point. This is because the farther the weight is from the pivot point, the greater the torque will be. The same is true for any object that is being rotated around an axis - the farther the force is applied from the axis of rotation, the greater the torque will be.
To know more about Torque click below:
brainly.com/question/6855614#
#SPJ4
A student is connecting three resistors of various resistances together in a circuit. In one configuration, the resistors are connected in a series. In another configuration, the resistors are connected in parallel. Explain which configuration results in a higher total resistance.
Most circuits contain more than one resistor, which restricts the passage of charge inside the circuit. Resistance is a unit of measurement for this charge flow restriction.
What is Resistance?When a current, or flow of charge, must pass through a sequence of devices, resistors are used. For instance, if a person holding a screwdriver allows current to flow through them and into the Earth, then
Resistors are connected in series to a voltage source. Given that the current must flow sequentially through each resistor, it makes sense that the total resistance is equal to the sum of the individual resistances.
This fact would be helpful to someone trying to prevent an electrical shock since they could wear high-resistance rubber-soled shoes to lower the current.
Therefore, Most circuits contain more than one resistor, which restricts the passage of charge inside the circuit. Resistance is a unit of measurement for this charge flow restriction.
To learn more resistance, refer to the link:
https://brainly.com/question/29427458
#SPJ1
Three loops of wire move near a long straight wire carrying a current as in the following figure. (a) What is the direction of the induced current, if any, in loop A? O clockwise O counterclockwise
O No current is induced. (b) What is the direction of the induced current, if any, in loop B? O clockwise O counterclockwise O No current is induced. (c) What is the direction of the induced current, if any, in loop C? O clockwise O counterclockwise O No current is induced.
(A) The current in the long straight wire produces a magnetic field that is perpendicular to its direction of flow.
What is Counter clockwise ?
Counter clockwise is a direction opposite to the usual clockwise direction. It is often used to describe the direction of rotation or movement, such as the turning of a wheel, the orbits of planets, or the hands of a clock. Counterclockwise motion can also be referred to as "widdershins" or "anticlockwise."
This magnetic field interacts with the loops of wire, inducing a current in them. The direction of the current in loop A is clockwise due to the right hand rule.
(B) No current is induced. Since the flux through loop B is not changing, no induced current is created.
(C) No current is induced. Since loop C is not moving, the changing magnetic field will not induce any current in it.
To learn about Counter clockwise
https://brainly.com/question/28354740
#SPJ4
Complete Questions:
(a) What is the direction of the induced current, if any, in loop A?
A) clockwise
B) counterclockwise
C) No current is induced.
(b) What is the direction of the induced current, if any, in loop B?
A clockwise
B counterclockwise
C No current is induced.
(c) What is the direction of the induced current, if any, in loop C?
A clockwise
B counterclockwise
C No current is induced.
A hand pump suitable for inflating a football has a cylinder which is 0.24m in length and an internal cross-sectional area of 5.0 x 10 -4 m 2 . To inflate the football the pump handle is pushed in and air is pumped through a one-way valve. The valve opens to let air in to the ball when the air pressure in the pump has reached 150 000 pa. (Assume the air temperature remains constant}
a) If the pressure in the pump is initially 100 000 pa, calculate how far the piston must be pushed inwards before the one way valves opens.
(b) When the one-way valve opens the total pressure in the cylinder will be 150 000 pa. What force will be exerted on the piston by the air in the cylinder?
The distance the piston needs to travel for the valve to open is equal to the applied force divided by the area, which is equal to 0.1 m.
What is applied force?
Applied force is a type of force that is applied to an object or system in order to cause it to move, accelerate, or change its shape. This type of force is often generated by machines and other devices, and can also be exerted by humans.
Applied force can also be used to counter other forces, such as gravity, friction, and inertia. Applied force is measured in newtons (N).
To learn abot more applied force.
https://brainly.com/question/25239010
#SPJ1
The __________ technique lets you turn the steering wheel as much as a half turn while still keeping both hands on the wheel.
The hand over hand technique lets you turn the steering wheel as much as a half turn while still keeping both hands on the wheel.
Turn the vehicle by lowering the steering wheel in the desired direction (for left turns, pull with your left hand, and vice versa). Relax your other hand and lower the driving wheel. Bring it down to meet your "pulling" hand above your but-tocks, along the wheel. When they come together, let go of the "pulling" hand and let the other to take con-trol.
It is not a good idea to turn off the ignition while the vehicle is in mo-tion, therefore Even though the car has a steering wheel lock, it is not a good idea to switch it off while it is going since it can cause the car to lose con-trol, which can cause problems and accidents.
To know more about steering wheel
https://brainly.com/question/4209682
#SPJ4
A microscope slide of the letter "p" is placed on the microscope stage so that it is oriented right side up with respect to the student using the microscope. What will the letter resemble when she observes the letter through the microscope?
On the microscope slide, a specimen will appear upside-down and facing left while it is actually right-side up and facing right.
What is the orientation of a microscope?The orientation of the specimen image is reversed when viewed via a microscope compared to the orientation of the actual specimen. As a result, when viewed under a microscope, the specimen will appear to be upside-down and backwards.
Coarse Adjustment Knob: To concentrate the specimen, the coarse adjustment knob, which is placed on the microscope's arm, raises and lowers the stage. With just a partial turn of the adjustment knob, the gearing system creates a significant vertical movement of the stage.
Condenser-Objective lens-Body tube-Eyepiece is the proper order for the flow of light in a compound microscope.
Use two hands at all times when moving your microscope. Lift the scope while encircling the arm with one hand.
To learn more about microscope refer to:
https://brainly.com/question/9255183
#SPJ4
A paper airplane is thrown with an initial velocity of 2.4 m/s and an angle of 60°. Find the voy
Initial velocity of 2.4 m/s and an angle of 60°.
The x component is 2.4 m/s cos(60°) = 2.4 m/s (0.5) = 1.2 m/s
The y component is 2.4 m/s sin(60°) = 2.4 m/s (0.866) = 2.08 m/s
What is Initial velocity?Initial velocity is the speed an object has when it starts moving in a certain direction. It is the speed that an object has before any external forces act upon it. Initial velocity is a vector quantity, meaning it has both a magnitude, or size, and a direction. Initial velocity is usually measured in meters per second (m/s). It is important to note that the initial velocity of an object can be different depending on the reference frame from which it is measured.
To learn more about Initial velocity visit:
brainly.com/question/28996913
#SPJ1
The complete question is-
A paper airplane is thrown with an initial vclocity of 2,4 m and angle of 60" Find the Voz: 012m/s 0.62 mn/& 0 1.70 m/8 208 m/$
the electrical potential due to a dipole on its axis at a point p at a large distance x from the dipole is given by v
The electrical potential due to a dipole at a point P on its axis at a large distance x from the dipole is given by the formula: V = (p * x) / (4 * pi * epsilon_0 * x^2)
Where:
p is the dipole moment, a vector quantity that represents the magnitude and direction of the dipole. It is defined as the product of the magnitude of one of the charges (q) and the distance between the charges (d), p = q*d.x is the distance from the dipole to point P, it is a scalar quantity.epsilon_0 is the electric constant or vacuum permittivity, it is a scalar quantity that relates the electric flux density to the electric field strength. Its value is approximately 8.85 x 10^-12 C^2/Nm^2.The equation assumes that point P is located on the axis of the dipole (the line connecting the two charges) and that the distance x is much larger than the size of the dipole. This means that the dipole can be considered as a point source of electric potential and the field at point P is well approximated by the field of a point charge.It's important to note that the formula gives the potential at point P due to the dipole, however, the dipole itself also has an electric field which can be found by taking the gradient of the potential.Learn more about the electrical potential here:
https://brainly.com/question/14306881
#SPJ4
In an 11v11 adult game, I see a defender challenge for the ball. The defender misses the ball and with their momentum they accidentally but careelessly trip the opponent. The ball rolls over the touchline. What is the restart
For the Direct free kick, the game restarted.
What does a soccer direct free kick entail?There are two different kinds of free kicks used in soccer: direct and indirect.The term "direct free kick" refers to a kick that can be used as a direct strike.Indirect free kicks require a second touch before the ball can be used as a shot at goal.
A direct penalty kick is what?If a player attacks an opponent in a way that the referee deems to be irresponsible, reckless, or employing excessive force, the referee will award a direct free kick.jumps, kicks, or makes an attempt to kick.
To know more about soccer visit:
https://brainly.com/question/15499943
#SPJ4
Three point charges are arranged at the corners of a square of side L as shown in (Figure 1) What is the potential at the fourth corner (point A)? Express your answer in terms of the variables Q, L, and the Coulomb’s constant k.
The potential at the fourth point will be [tex]\frac{k^3Q}{\sqrt{L}}[/tex]
Let q1= -2Q and q2 = 6Q. ( k.)
What does charge number three's value, q3, equal?
To remedy the issue, the charges' orientation is also necessary.
You might try using the formula (kQ/r) to get the potential at the fourth corner.
Electric potential is a scalor, therefore adding the values from the three sites is as simple as adding them all together.
The effort required to transfer a unit charge against an electric field from a reference point to a specified spot. Earth is typically chosen as the reference point, however, any location beyond the range of the electric field charge can be utilized. potential electricity.
for instance, q1=-Q, L from the 4th point
q2=3Q and the fourth point's root is L.
The solution to q3= Q L from the fourth point is just [tex]-\frac{kQ}{L} + \frac{k^3Q}{\sqrt{L}} +\frac{kQ}{L} = \frac{k^3Q}{\sqrt{L}}[/tex] (at the fourth point)
For more questions on Electric potential
https://brainly.com/question/14306881
#SPJ4
The missing diagram is attached below:
Imagine that an object i falling through a long traight gla tube held vertical; air ha been removed
completely from the tube. The object doe not touch the wall of the tube. Will the object experience any
force of friction
No, the object will not experience any force of friction because there is no air or other medium in the tube to create friction against the object.
This is because friction is only possible when two objects are in contact with each other, or when an object is in contact with a medium like air or water. Since there is no air or other medium in the tube, there is nothing for the object to interact with. As a result, the object will fall through the tube without any external forces acting on it, such as friction. The motion of the object will be completely determined by the force of gravity and the object's inertia, and no other external forces will be present.
To know more about friction refer to the link brainly.com/question/13000653
#SPJ4
Assume that you have a mass of 50.0 kg. Earth has a
mass of 5.97 X1024 kg and a radius of 6.38X 10 m.
What is the force of gravitational attraction
between you and Earth?
The force of gravitational attraction is 489.18N
Gravitation is a study of how two masses interact, one of which is heavier and the other lighter, and force is the force that attracts all bodies towards itself in this universe. Gravitational force is a central force that is exerted along the line joining the q of two masses, and the direction of that force depends only on their position with respect to the source mass.Gravitational force: The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of the distance between them.[tex]F = \frac{Gm_{1} m_{2} }{r^{2} }[/tex]
Where,
F is the gravitational force between two bodies
m1 is the mass of the first body = 50 Kg
m2 is the mass of the second body = [tex]5.97 * 10^{24} Kg[/tex]
r is the distance between the centres of two bodies = [tex]6.38 * 10^{6} m[/tex]
G = gravitational constant = [tex]6.67 * 10^{-11}[/tex]
Putting these values in above equation we get: F = 489.18N
To know more about gravity visit:
https://brainly.com/question/27943482
#SPJ1
A fish introduces more air into its swim bladder so that it rises toward the surface of the water. Which of the following statements best describes the situation? A The fish decreased its buoyant force by decreasing its density. B The fish increased its buoyant force by increasing its density. с The fish increased the buoyant force by reducing its density.
The situation will be describe with:
C. The fish increased the buoyant force by reducing its density.
THE SWIM BLADDERA swim bladder is an internal organ that some fish use to control their buoyancy. The fish can adjust the amount of gas in the swim bladder to make itself more or less dense than the water around it. In order to rise toward the surface of the water, the fish would need to decrease its density relative to the water, which it can do by increasing the amount of air in its swim bladder. This increase in air in the swim bladder reduces the fish's density, which in turn increases its buoyancy and allows it to rise to the surface.
There are different ways that a fish can control its buoyancy, and different species of fish may have different adaptations for doing so. Some fish may have other organs or structures that can be used to control buoyancy, such as lipids in their body tissue, or fins that can be used to control their position in the water.
Additionally, some fish may have the ability to change their shape or size in order to control their buoyancy, such as by swallowing air or by compressing their swim bladder. However, in general, the most common way for fish to control buoyancy is by adjusting the amount of gas in their swim bladder.
Learn more about swim bladder here:
https://brainly.com/question/14431269
#SPJ4
What is the hypothesis of thermal energy transfer?
The heat transfer theory attempts to anticipate the energy transfer that may occur between material bodies as a result of temperature differential. Conduction, convection, and radiation are the three processes through which heat may be moved from one location to another.
Heat transfer is a thermal engineering subject that deals with the creation, consumption, conversion, and exchange of thermal energy (heat) across physical systems.
Heat transmission techniques include thermal conduction, thermal convection, thermal radiation, and energy transfer via phase shifts. To achieve heat transfer, engineers also address the transfer of mass of different chemical species (mass transfer in the form of advection), either cold or hot. While these processes have separate properties, they frequently occur in the same system at the same time.
Learn more about thermal energy to visit this link
https://brainly.com/question/18989562
#SPJ4
An object has a density of 3.25 kg/m?. If it has a total volume of 12.65m?. What is the object's mass?
Answer:
The object's mass is 41.1125 kilograms.
Explanation:
We can use the general density equation to determine the mass.
Density Equation
[tex]p=\frac{m}{V}[/tex]
[tex]p[/tex] is the density
[tex]m[/tex] is the mass
[tex]V[/tex] is the volume
Lets solve for [tex]V[/tex].
Multiply both sides of the equation by [tex]V[/tex].
[tex]p*V=\frac{m}{V}*V[/tex]
Cancel out the common factor of [tex]V[/tex] on the right side.
[tex]pV=m\\m=pV[/tex]
Now we have an equation for mass.
We are given
[tex]p=3.25[/tex]
[tex]V=12.65[/tex]
Substituting our values into our equation gives us
[tex]m=3.25*12.65\\m=41.1125[/tex]
Notice the unit of the given density
[tex]kg/m[/tex]
Our answer will be in kilograms
A student carefully measures the time it takes for a turtle to move 10.0 m. He gets a value of 4218.6 s. However he discovers that the stopwatch had already been running for about 300 s before the turtle started to move. How long did it take the turtle to go 10.0 m
The turtle traveled 10 meters in 3,918.6 seconds using simple subtraction.
What does subtracting in math mean?In mathematics, to subtract is to eliminate something from set of things or a group of things. When we remove from the group, the number of items falls or gets less. The minuend, forces at play, and difference are the elements of a subtraction problem.
It involves calculating the distinction between two numbers. The icon looks like this: (minus). In this operation, we take a particular number then split it by a fewer group. In other words, we divide one integer by another. Click here for some difficult addition and subtraction sums.
He gets a value of 4218.6 s
he discovers that the stopwatch had already been running for about 300 s
Time taken by turtle = 4218.6 - 300
= 3918.6 s
To learn more about subtraction from given link
https://brainly.com/question/28467694
#SPJ4