1) If the country of Pika Pika taxes all pili nuts imported from The​ Philippines, Pika Pika has impased​ a(n)_________.A.quotaB.tariffC.embargoD.foreign content requirementE.subsidy2) When the husband of Mary​ Hernandez, who was involved in illegal activities at Cambridge​ Analytica, threatened to divorce her if she did not end her involvement with the the​ company, he demonstrated an example of​ ________.A.legal oversightB.compromised business ethicsC.ethical ambiguityD.strong personal ethicsE.flexible ethical standards3)The nation of Wookanda raises emu relatively more efficiently than the nation of Bookanda. Bookanda weaves cotton blankets relatively more efficiently than Wookanda. Wookanda decides to specialize in raising​ emu, to sell cotton to​ Bookanda, and to buy blankets from Bookanda. Bookanda decides to specialize in blanket​ weaving, to sell blankets to​ Baa-Baa, and to buy cotton from Wookanda. This international trade illustrates​ ________ advantage.A.artificial competitiveB.globalizationC.internationalD.absoluteE.comparative

Yes, framing can influence the choices individuals make in economics. The manner in which a problem is presented can affect the perception of the available options or choices, which can impact the decision-making process.

Yes, framing can influence the choices individuals make in economics. The manner in which a problem is presented can affect the perception of the available options or choices, which can impact the decision-making process. The framing of a problem can also influence the emotions and values associated with the choices, leading to different outcomes. Therefore, it is important to consider the framing of a problem in economic decision-making.

Learn more about decision-making process here

https://brainly.com/question/19901674

#SPJ11

Yes, framing can influence the choices individuals make, even when there is no difference between options or choices. The way a problem is presented can affect the way people perceive and evaluate the available options, which can ultimately impact their decision-making process.

Research in behavioral economics and psychology has shown that individuals may be susceptible to framing effects, and the same options presented in different ways can lead to different choices. However, it is important to note that framing effects are not universal, and some people may be less susceptible to them than others . It is important to consider the framing of a problem in economic decision-making.

Learn more about “  economic decision-making.“ visit here;

https://brainly.com/question/30383874

#SPJ4

To find the minimum revenue amount for disaggregated disclosure, you need to consult the applicable financial reporting guidelines and identify the thresholds or percentages stated for segment significance.

1. Identify the terms:
  a. Segment
  b. Disaggregated disclosure
  c. Minimum revenue amount

2. Define the terms:
  a. Segment: A part of a business that generates revenue and incurs expenses independently of other segments.
  b. Disaggregated disclosure: The process of breaking down and reporting financial information separately for each significant segment of a company.
  c. Minimum revenue amount: The lowest revenue threshold a segment must meet to be considered significant for disaggregated disclosure purposes.

3. Understand the criteria for determining the minimum revenue amount:
  The criteria for determining if a segment is significant enough to require disaggregated disclosure can vary depending on the regulatory body and financial reporting standards that apply.

4. Determine the minimum revenue amount:
  As the specific criteria are not provided in your question, I cannot provide an exact minimum revenue amount. However, I encourage you to review the financial reporting guidelines relevant to your company or situation.

For more such questions on financial reporting

brainly.com/question/28944788

#SPJ11

a) The entry to record the sale of the season tickets is $336,000. b) the entry to record the revenue recognized after playing the first home game will be:- $16,800

the entry to record the sale of the season basketball tickets at Marin University would be as follows:

Account Titles and Explanation            Debit              Credit
Cash (4,200 tickets x $80)              $336,000
Unearned Revenue                                       $336,000

The cash account is debited for the amount received for the sale of the tickets, which is calculated by multiplying the number of tickets sold (4,200) by the price of each ticket ($80). The unearned revenue account is credited for the same amount, as the university has not yet provided the service (i.e., the basketball games) for which the tickets were sold.

For the second question, the entry to record the revenue recognized after playing the first home game would be as follows:

Account Titles and Explanation            Debit              Credit
Unearned Revenue (1/20 x $336,000)         $16,800
Revenue                                                         $16,800

The unearned revenue account is debited for the amount of revenue that has been earned (i.e., recognized) after the first home game has been played. This amount is calculated by taking the total amount of unearned revenue ($336,000) and dividing it by the number of games in the home schedule (20), resulting in $16,800. The revenue account is then credited for the same amount, as revenue has been recognized for the first game played.

In summary, the first entry records the sale of the season basketball tickets as unearned revenue, while the second entry records the recognition of the revenue earned after playing the first home game. By doing so, Marin University can accurately track its revenue from ticket sales and ensure compliance with accounting principles.

To learn more about  revenue here:

https://brainly.com/question/16232387#

#SPJ11

Answer: The main elements of market revolution are Transportation, Mechanization, and Commercial Farming

Explanation: Following the War of 1812, the country looked to expand into the western territories in order to take advantage of the economic opportunities there as New Markets opened up.

1. Advances and improvements in transportation (roads, steamboats, canals , railroads).

2. advances in communication , example telephone, telegram

3. westward expansion.

4. agriculture technology and expansion

For further details about Market revolution : https://brainly.com/question/31507818?answering=true&answeringSource=feedPublic%2FhomePage%2F2

WBS stands for Work Breakdown Structure, which is a project management technique used to break down a project into smaller, more manageable components or tasks.

A WBS is a hierarchical decomposition of the project deliverables, which helps to organize and define the scope of the project.

1. Top-level categories in a WBS should be written as numbered nouns

2. An activity in a WBS is described using: action verbs

3. Besides manufacturing a new vehicle, car dealerships were opened to sell Edsels on E-Day. This illustrates how _cost_was the primary driver for Edsel: cost

4. A numerical and hierarchical chart illustrating all the project entails is the: WBS

To learn more about “WBS” refer to the https://brainly.com/question/30087262

#SPJ11

The correct answer is a. No, because the marginal utility of the 4th plateful will be negative.

This is because the additional satisfaction gained from the fourth plateful is only 1 unit, which is less than the satisfaction gained from the third plateful. As a result, the marginal utility is diminishing and eventually becomes negative, meaning that the fourth plateful would not provide any additional satisfaction and may even decrease satisfaction. Therefore, it is not worth going back for more food.
c. No, since the marginal utility of the 4th plateful is less than 17 units of utility.

just finished your third plateful of Thanksgiving dinner and it yielded 17 units of additional satisfaction, and the fourth plateful of Thanksgiving dinner would give 1 unit of utility. Should you go back for more

Learn more about marginal  here:

https://brainly.com/question/30529566

#SPJ11

The impact of capitalism and business ownership on factors like competition, pricing, and product availability. In a capitalist system, businesses like Jack's Wheels Limited can thrive due to the freedom of private ownership and market competition.

This leads to an abundant selection of products, as companies constantly innovate and adjust to market influences. Profits are generated through constant sales, and businesses may choose to make charity donations as well. However, factors like expensive gas prices can impact a business's bottom line, while government policies may also influence the market

Under communism, businesses are owned and controlled by the government, with the goal of ensuring equality and avoiding exploitation. In contrast, capitalism allows for private ownership of businesses, with the aim of generating profits and promoting competition.

In a capitalist system, businesses have the freedom to set their own prices and operate with minimal government intervention. This can lead to a wide range of products and services being available to consumers, as well as constant sales and promotions to attract customers. However, there may also be concerns about market influence and the potential for businesses to prioritize profits over other social or environmental goals.

One example of this might be Jack's Wheels Limited, a company that produces and sells cars. Under capitalism, they would have the freedom to set their own prices and compete with other car manufacturers. However, if gas prices were to skyrocket, this could have an impact on their profits and sales. In a communist system, the government might step in to regulate gas prices or provide subsidies to businesses like Jack's Wheels to ensure they can continue operating.

Additionally, while capitalism generally prioritizes profits and competition, there is still room for charity donations and social responsibility. Many businesses choose to support charitable causes or invest in sustainable practices, even if it may not lead to immediate financial gain.

Overall, while capitalism and communism have different approaches to business ownership and market influence, there are pros and cons to each system. It's up to individual societies to determine which approach is best for them based on their values and priorities.

Learn more about business  here:

https://brainly.com/question/15826679

#SPJ11

Water rights, markets, and rates are often tied to their intended use because water is a finite resource and its availability needs to be managed in order to ensure that users have access to the water they require.

Markets are places where buyers and sellers come together to exchange goods and services. They are often physical locations such as farmers markets, flea markets and shopping malls. They can also be digital locations such as stock markets, currency exchanges, and online marketplaces. Markets are important because they facilitate the exchange of goods and services, allowing buyers and sellers to find each other and make transactions.

Out of use or out of basin water transfers are often prohibited because the transfer of water to another area can cause a disruption to the existing ecosystems and water supply in the area of origin, and can also lead to increased costs for existing users.

To learn more about markets

https://brainly.com/question/4129536

#SPJ1

Water rights, markets, and rates are often tied to their intended use because water is a finite resource and its availability needs to be managed in order to ensure that users have access to the water they require.

Markets are places where buyers and sellers come together to exchange goods and services. They are often physical locations such as farmers markets, flea markets and shopping malls. They can also be digital locations such as stock markets, currency exchanges, and online marketplaces. Markets are important because they facilitate the exchange of goods and services, allowing buyers and sellers to find each other and make transactions.

Out of use or out of basin water transfers are often prohibited because the transfer of water to another area can cause a disruption to the existing ecosystems and water supply in the area of origin, and can also lead to increased costs for existing users.

To learn more about markets

https://brainly.com/question/4129536

#SPJ1

A Decision Support System (DSS) facilitates interaction between decision-makers and information systems in an organization to achieve desired outcomes. The type of DSS interaction can vary depending on the scenario.

Scenario 1: A marketing manager is analyzing customer demographics and purchase history to identify potential target segments for a new product.
Interaction Type: Data-driven DSS – In this case, the manager is interacting with the system to analyze large datasets and discover useful patterns or trends that can inform their decision-making.

Scenario 2: A financial analyst is using a forecasting model to predict future stock prices based on historical data and various economic indicators.
Interaction Type: Model-driven DSS – Here, the analyst interacts with the system by inputting specific variables into a predictive model to generate forecasts for the desired outcome, i.e., estimating future stock prices.

Scenario 3: A project manager is assessing potential risks and their impact on a project's timeline and budget to decide on the best mitigation strategies.
Interaction Type: Knowledge-driven DSS – In this scenario, the project manager interacts with the system to access expert knowledge and recommendations regarding risk management, allowing them to make more informed decisions to achieve a successful project outcome.

Learn more about Decision Support System here: brainly.com/question/28170825

#SPJ11

b)  Don is an Influencer.

The roles of individuals involved in a purchase decision are important to understand in marketing and sales.

In this scenario, Don Amspacher provides information for evaluating alternative purchase decisions and helps define and set specifications for evaluating alternatives for purchasing. This indicates that Don is not the ultimate decision-maker (decider) or the person who makes the actual purchase (buyer).

Instead, Don is an influencer, as he has the ability to influence the final decision by providing information and setting specifications. In the buying process, an influencer is someone who provides information or opinions to others in the organization who have the ultimate decision-making power. The influencer is typically someone who has expertise in the area or is affected by the outcome of the purchase decision.

Learn more about purchase decision

brainly.com/question/30166151

#SPJ11

solve for PV to get $6,236.11 as the initial price of the bond.

To calculate the initial price of the bond, we need to use the formula:

PV = C x (1 - (1 /[tex](1 + r)^n)[/tex]) / r + FV /[tex](1 + r)^n[/tex]

Where:

PV = Present value or initial price of the bond

C = Coupon payment per year = par value x coupon rate = $10,000 x 8% = $800

r = Required rate of return = 12%

n = Number of periods or years to maturity = 25

FV = Face value or par value of the bond = $10,000

Plugging in the values, we get:

PV = $800 x (1 - (1 /[tex](1 + 12%)^25[/tex])) / 12% + $10,000 /[tex](1 + 12%)^25[/tex]

PV = $800 x (1 - 0.0437) / 0.12 + $1,223.59

PV = $6,236.11

Therefore, the initial price of the bond is $6,236.11.

Using financial calculator process:

N = 25 (number of periods)

I/Y = 12 (interest rate)

PMT = 800 (coupon payment)

FV = 10,000 (face value)

Learn more about maturity  here:

https://brainly.com/question/9812396

#SPJ11

If a business in the industry from my example is considering an intervention, there are a few key pieces of information they need to know in order to fully understand how it will affect their business.

First, they need to understand the goals and objectives of the intervention, as well as the expected outcomes. This will help them determine whether the intervention aligns with their own goals and whether it will ultimately benefit their business.

Second, they need to know how the intervention will be implemented and what changes it will require within their business operations. This will allow them to plan and prepare accordingly.

Third, they need to be aware of any tomorrow or challenges associated with the intervention and how to mitigate them.

Finally, they need to understand the timeline for the intervention and when they can expect to see results. By taking these factors into account, a business can make informed decisions about whether to participate in the intervention and how to best prepare for its impact

Learn more about business at

https://brainly.com/question/8119526

#SPJ11

a strategic vision offers minimal value to the organization unless its effectively communicated to lower level managers and employee .True.

A strategic vision provides direction and purpose to the organization. However, it will not have any value unless it is effectively communicated to the lower-level managers and employees who are responsible for implementing it. If the vision is not communicated properly, it will not be understood, and the employees will not know how to align their work with the company's goals. Therefore, effective communication of the strategic vision is critical to its success and realization of its benefits.

Learn more about employees  here:

https://brainly.com/question/21847040

#SPJ11

The expected economic growth rate for the country is dependent on the population growth rate (n). Without knowing this value, we cannot determine the exact growth rate. However, we can conclude that the growth rate will be positive as long as the population growth rate is lower than 0.64%.

Based on the information provided, we can use the Solow Growth Model to calculate the expected economic growth rate for the country. The Solow Growth Model states that economic growth is determined by changes in the amount of capital per worker and technological progress.

First, we can calculate the steady-state capital per worker using the formula:

k* = (s / (n + δ))^(1/1-α) * A

where:
- s is the savings rate (24%)
- n is the population growth rate (not given)
- δ is the depreciation rate (5%)
- α is the capital share in output (not given)
- A is the level of technology (not given)

Since we don't have values for n, α, and A, we will assume that they remain constant. Thus, we can solve for k* using the given values of s and δ:

k* = (0.24 / (n + 0.05))^(1/0.67)

Next, we can calculate the steady-state output per worker using the formula:

y* = A * (k*)^α

Again, we don't have a value for A or α, so we will assume they remain constant. Thus, we can solve for y* using the given value of k*:

y* = A * (k*)^α

Finally, we can calculate the expected growth rate of the economy using the formula:

g = (s / (n + δ)) * (y* / k*) - δ

Substituting the values we have:

g = (0.24 / (n + 0.05)) * (y* / k*) - 0.05

We can simplify this equation by substituting y* / k* with the capital output ratio (3):

g = (0.24 / (n + 0.05)) * 3 - 0.05

g = 0.69 / (n + 0.05) - 0.05

Therefore, the expected economic growth rate for the country is dependent on the population growth rate (n). Without knowing this value, we cannot determine the exact growth rate. However, we can conclude that the growth rate will be positive as long as the population growth rate is lower than 0.64%.

Learn more about economic growth rate here

https://brainly.com/question/16038864

#SPJ11

In the long run, Ike's Bikes would choose to produce bikes using one, two, or three factories depending on the production capacity of each factory.

Assuming Ike's Bikes is projected to produce 450 bikes per month over the next few years, the number of factories it chooses to build bikes in the long term will depend on each factory's capacity.

If each factory's maximum production capacity is 150 bikes per month, Ike's Bikes would need to produce 450 bikes per month using three factories.

If each factory has a maximum production capacity of 225 bikes per month, Ike's Bikes would have to use two factories to produce 450 bikes per month.

If each factory's maximum production capacity is 450 bikes per month, Ike's Bikes only needs to produce 450 bikes per month in one factory.

So in the long run, Ike's Bikes will choose to build bikes in one, two, or three factories, depending on the capacity of each factory. 

learn more about production capacity

brainly.com/question/15298925

#SPJ4

In the long run, Ike's Bikes would choose to produce bikes using one, two, or three factories depending on the production capacity of each factory.

Assuming Ike's Bikes is projected to produce 450 bikes per month over the next few years, the number of factories it chooses to build bikes in the long term will depend on each factory's capacity.

If each factory's maximum production capacity is 150 bikes per month, Ike's Bikes would need to produce 450 bikes per month using three factories.

If each factory has a maximum production capacity of 225 bikes per month, Ike's Bikes would have to use two factories to produce 450 bikes per month.

If each factory's maximum production capacity is 450 bikes per month, Ike's Bikes only needs to produce 450 bikes per month in one factory.

So in the long run, Ike's Bikes will choose to build bikes in one, two, or three factories, depending on the capacity of each factory. 

learn more about production capacity

brainly.com/question/15298925

#SPJ4

D) All of the above can occur in the background when a planned order is converted to a production order.

Scheduling of the production order, releasing the production order on creation, and determining materials availability for the production order are all necessary activities that can happen automatically in the system. This helps to streamline the production process and ensure that orders are executed efficiently.
Your answer: D) All of the above. When a planned order is converted to a production order, activities such as scheduling of the production order, releasing the production order upon creation, and determining materials availability for the production order can all occur in the background.

Visit here to learn more about production order brainly.com/question/29054768

#SPJ11

A workload table captures the amount of work.. The correct answer is A: "amount of work."

A workload table captures the amount of work that each flow unit type requires for each resource, helping in managing resources effectively and efficiently. It provides information about the amount of time, effort, or resources required to complete a particular task or activity. By using a workload table, organizations can allocate their resources properly and ensure that they are being used effectively to meet the demand for their products or services.

The correct answer is A.

You can learn more about workload table at

https://brainly.com/question/31329737

#SPJ11

A workload table captures the amount of work.. The correct answer is A: "amount of work."

A workload table captures the amount of work that each flow unit type requires for each resource, helping in managing resources effectively and efficiently. It provides information about the amount of time, effort, or resources required to complete a particular task or activity. By using a workload table, organizations can allocate their resources properly and ensure that they are being used effectively to meet the demand for their products or services.

The correct answer is A.

You can learn more about workload table at

https://brainly.com/question/31329737

#SPJ11

The quantity of goods and services that can be produced by one worker or by one hour of work is referred to as labor productivity.

Human capital refers to the skills, knowledge, and experience possessed by the workforce, which can improve labor productivity. Real GDP measures the total value of goods and services produced in a country, adjusted for inflation.
Regarding the US economy from 2012 to 2019, based on the business cycle theory and current GDP growth rate, it experienced an expansion from 2012 to a peak in 2019, followed by a contraction.

The business cycle theory suggests that economies go through cycles of expansion and contraction, with periods of peak growth followed by downturns and recessions, and then eventually recoveries. The US economy had experienced a severe recession in 2008-2009, but by 2012 it had started to recover and enter a phase of expansion.

Learn more about human capital https://brainly.com/question/10480832

#SPJ11

The aggregate supply curve shows the relationship between: (D) the inflation rate and the level of aggregate output supplied.

The aggregate supply curve represents the amount of goods and services that firms are willing and able to supply at different price levels. As the price level increases, firms are willing to supply more output due to higher profits, which leads to a positively sloped aggregate supply curve. Therefore, the relationship shown on the aggregate supply curve is between the inflation rate (measured by the price level) and the level of aggregate output supplied.

Therefore, option D is the right answer.

To know more about aggregate supply models, visit: https://brainly.com/question/29898718

#SPJ11

If a level strategy is used, the total inventory cost will depend on the specific inventory holding cost and back ordering cost for the particular product and business. The inventory holding cost is the cost of keeping inventory on hand, such as storage and handling costs, insurance, and obsolescence.

The backorder cost is the cost of running out of inventory and having to expedite orders or miss sales opportunities.
To calculate the total inventory cost for a level strategy, you would need to factor in both of these costs over the designated time period. This can be done by multiplying the inventory holding cost by the average inventory level during that period and adding that to the back ordering cost, which can be calculated by multiplying the number of units back ordered by the cost per unit.

Ultimately, the total inventory cost will vary based on the specific strategy used and the specific costs associated with that strategy. It is important for businesses to carefully consider and optimize their inventory strategies to minimize overall inventory costs and maximize profits.

Learn more about inventory  here:

https://brainly.com/question/14184995

#SPJ11

Records (rows) and fields (columns) make up a table. Data kinds contained in fields include text, integers, dates, and hyperlinks, as well as others. Just so you know: contains specific information, such as details regarding a particular employee or product. Select View from the Home menu, then select Datasheet View from the set of views.

On the Fields tab, under the Add & Delete group, select More Fields. Select a field from the More Fields list to enter the new column into. Access places the field next to the column where your cursor is now located. In computer jargon, rows are referred to as records, whereas columns are called fields. There are rows and columns in a table.

To learn more about Columns, click here.

https://brainly.com/question/29194379

#SPJ1

True. The modification of the overhead allocation method that uses a single plantwide rate is known as the traditional overhead allocation method. An alternative approach is to use multiple predetermined overhead allocation rates that have a single allocation base. This method is known as the activity-based costing (ABC) method.

ABC allocates overhead costs based on the activities that actually drive those costs, rather than simply using a single plantwide rate. By breaking down overhead costs into separate activities, businesses can more accurately allocate costs to products or services that use those activities.

For example, a company may have several different activities that contribute to its overhead costs, such as machine setup, quality control, and packaging.

By calculating separate predetermined overhead rates for each of these activities and using them to allocate costs to specific products or services, the company can more accurately determine the true cost of producing each item.

Using multiple predetermined overhead allocation rates that have a single allocation base can help businesses make more informed decisions about pricing, product mix, and resource allocation, leading to more efficient and profitable operations.

To know more about activity-based costing refer here:

https://brainly.com/question/29310410#

#SPJ11

The net income before taxes will be none of the above. Therefore, the correct option is e.

To calculate the net income before taxes, we need to subtract the operating expenses and losses from the total revenues and add the gains. Hence,

Net income before taxes = Total revenue - Operating expenses and costs + Gains - Losses

1. Start with the total revenues: $50,000

2. Subtract the operating expenses and costs: $50,000 - $0,000 = $50,000

3. Add the gains: $50,000 + $3,000 = $53,000

4. Subtract the losses: $53,000 - $1,000 = $52,000

The net income before taxes will be $52,000. Therefore, the correct answer is (e) None of the above.

Learn more about Net income:

https://brainly.com/question/28390284

#SPJ11

The net income before taxes will be none of the above. Therefore, the correct option is e.

To calculate the net income before taxes, we need to subtract the operating expenses and losses from the total revenues and add the gains. Hence,

Net income before taxes = Total revenue - Operating expenses and costs + Gains - Losses

1. Start with the total revenues: $50,000

2. Subtract the operating expenses and costs: $50,000 - $0,000 = $50,000

3. Add the gains: $50,000 + $3,000 = $53,000

4. Subtract the losses: $53,000 - $1,000 = $52,000

The net income before taxes will be $52,000. Therefore, the correct answer is (e) None of the above.

Learn more about Net income:

https://brainly.com/question/28390284

#SPJ11

The cost of goods sold using the FIFO method is $8,100. The correct answer is D. $8,100.

The cost of goods sold (COGS) can be calculated using the FIFO (First In, First Out) method, which assumes that the first units purchased or produced are the first ones sold. According to this method, the cost of the beginning inventory is matched with the cost of the first units sold, and then the cost of the production during the period is matched with the cost of the remaining units sold.

In this case, the cost of the beginning inventory is 300 units x $11 = $3,300. The cost of the production during the period is 650 units x $12 = $7,800. Therefore, the total cost of goods available for sale is $3,300 + $7,800 = $11,100.

Since the sales were 700 units, we need to determine which units were sold first. Since the beginning inventory was 300 units, it is assumed that these units were sold first. Then, 400 units from the production during the period were sold.

The cost of the 300 units sold from the beginning inventory is $11 each, or a total of 300 x $11 = $3,300. The cost of the 400 units sold from the production during the period is $12 each, or a total of 400 x $12 = $4,800.

Therefore, the total cost of goods sold is $3,300 + $4,800 = $8,100.

Learn more about inventory here:

https://brainly.com/question/28916857

#SPJ11

The statement "Start-up costs are an intangible asset with an indefinite life and should be amortized over the expected life of the business" is false  because Start-up costs are not an intangible asset with an indefinite life, and should not be amortized over the expected life of the business.

Start-up costs are considered expenses incurred during the initial stages of setting up a business. These costs are usually one-time expenses and are not considered intangible assets, which are non-physical resources with economic value. Start-up costs can include items such as legal fees, rent deposits, and marketing expenses.

Instead of amortizing start-up costs over the expected life of the business, these costs are typically capitalized and expensed over a shorter period of time.

According to the U.S. Generally Accepted Accounting Principles (GAAP), start-up costs must be expensed as incurred, meaning that they are recorded as an expense in the financial statements when they occur.

This treatment allows businesses to recognize the costs associated with starting a business in a more timely manner, rather than spreading them out over the entire life of the business.

To know more about financial statements click on below link:

https://brainly.com/question/14951563#

#SPJ11

B. "Depreciation on the plant" is a typical manufacturing overhead cost.

Manufacturing overhead costs are indirect costs that are not directly traceable to a specific product or job. They include costs such as rent, utilities, maintenance, and depreciation on the plant and equipment. Depreciation on the plant is an example of a manufacturing overhead cost because it is a non-cash expense that represents the wear and tear on the plant and equipment over time. It is not directly related to the production of a specific product, but it is necessary for the production process to occur.

Option B is answer.

You can learn more about overhead cost at

https://brainly.com/question/14751638

#SPJ11

The unit conversion cost, considering a total physical unit of 39,500 and total conversion costs of $97,250, is $2.5 per equivalent unit when there are 1,200 units in the ending inventory that are 50% complete in terms of conversion costs.

To find the unit conversion cost, you'll need to consider the total physical units, total conversion costs, and the information provided about the ending inventory. Here's a step-by-step explanation:
1. Determine the total physical units: 39,500
2. Subtract the ending inventory units: 39,500 - 1,200 = 38,300
3. Calculate the equivalent units for the ending inventory: 1,200 units * 50% complete = 600 equivalent units
4. Add the equivalent units to the units completed:  38,300 + 600 = 38,900 equivalent units
5. Determine the total conversion costs: $97,250
6. Calculate the unit conversion cost: $97,250 / 38,900 equivalent units = $2.5 per equivalent unit

To know more about conversion cost:

https://brainly.com/question/18365833

#SPJ11

The statement "Influencer marketing is a common application of observational learning" is true.

Influencer marketing refers to the practice of leveraging individuals with large followings on social media platforms to promote products or services. Observational learning, a type of social learning, occurs when people learn by watching and imitating others' actions.

In the context of influencer marketing, consumers observe influencers using or endorsing a product and may be more inclined to purchase it themselves based on this observation. Influencers serve as role models, and their followers often trust their opinions and recommendations.

By observing the influencer's behavior and the positive outcome they experience from using a product, consumers learn to associate the product with success or satisfaction, and are more likely to make a purchase as a result. Overall, influencer marketing relies heavily on the principles of observational learning to drive consumer behavior.

To know more about Influencer marketing click on below link:

https://brainly.com/question/31104095#

#SPJ11

Sony should sell 9 units of the PSVR in Europe at a price of 6. Sony has developed the Sony PlayStation VR, a revolutionary 9th-generation video game.

To determine the optimal quantity and price for Sony to sell in Europe, we need to first calculate the marginal cost (MC) function. We can do this by taking the derivative of the cost function with respect to quantity:

MC = dC/dQ = 2

Next, we need to set marginal cost equal to marginal revenue (MR) to find the profit-maximizing quantity and price:

MR = dTR/dQ = P(Q) + Q(dP/dQ)

In the US market, we know that demand is given by 20 - P. Therefore, in order to solve for MR, we need to find the derivative of total revenue (TR) with respect to quantity:

TR = PQ
dTR/dQ = P + Q(dP/dQ)
dTR/dQ = P + Q(-1)
dTR/dQ = P - Q

Substituting in the demand function for the US market:

MR = P(Q) + Q(dP/dQ) = (20 - Q) + Q(-1) = 20 - 2Q

Now we can set MR equal to MC:

20 - 2Q = 2

Solving for Q, we get:

Q = 9

This tells us that Sony should sell 9 units of the PSVR in the European market.

To find the price, we can use the demand function for Europe:

Q = 3 - 0.5P
9 = 3 - 0.5P
P = 6

Therefore, Sony should sell 9 units of the PSVR in Europe at a price of 6.

Learn more about Sony here:

https://brainly.com/question/5626753

#SPJ11

Sony has developed the Sony PlayStation VR, a revolutionary 9th-generation video game console that makes use of cutting-edge virtual reality technology. As the first firm to develop a VR console product, Sony will enjoy a monopoly position for the foreseeable future. Sony’s cost function is

The recommended alignment option for the body text in most business documents is d. Left alignment.

The recommended alignment option for the body text in most business documents is d. Left alignment. This is because left alignment provides a clean and organized look, making the document easier to read and understand. Centered and full alignments can be distracting and difficult to read for long periods of time, while right alignment is rarely used for body text in business documents.

Learn more about Left alignment here

https://brainly.com/question/16021263

#SPJ11