0.0075mole of calcium trioxocrabonate IV is added to 0.015mole of a solution of hydrochloric acid .the volume of gas evolved at stp is​

1 mole of magnesium atoms will react with 2 moles of oxygen molecules. This is because the chemical equation for the reaction between magnesium and oxygen is: Mg + O2 → MgO.

A chemical equation is a symbolic representation of a chemical reaction, showing the reactants (starting materials) on the left side and the products (resulting substances) on the right side. The symbols used to represent the reactants and products are chemical formulas, which use the symbols of the elements in the reaction. The arrow between the reactants and products indicates the type of reaction taking place. The coefficients next to the symbols and formulae of entities indicate the number of moles of each species that are involved in the reaction. The overall reaction is balanced when the number of atoms of each element on the left side of the equation is equal to the number of atoms of that element on the right side of the equation.

This equation shows that for every 1 mole of magnesium atoms, 2 moles of oxygen molecules are required for the reaction to take place. Therefore, 1 mole of magnesium atoms will react with 2 moles of oxygen molecules.

To learn more about chemical equation
https://brainly.com/question/13847161
#SPJ1

Natural vegetative propagation uses bulbils, aerial shoots, roots, underground stems, and subaerial stems. Utilizing unique vegetative components, artificial vegetative propagation is accomplished.

The production and growth of a new plant through asexual means or from a plant fragment is known as vegetative propagation. There is no gamete production or fertilization throughout the process of propagation.

In this procedure, tubers—modified roots—grow into new plants. In some plant species, adventitious buds even grow on the roots. If the correct circumstances are present, these buds develop into new plants or sprouts. Sweet potato and dahlia are two examples.

To learn more about vegetative propagation visit:

brainly.com/question/1213600

#SPJ1

Answer: I believe its two

Explanation:

8 acidic oxides, take your pick <3

Aluminium oxide.

Silicon dioxide.

Phosphorus oxides.

Sulfur oxides.

Chlorine oxides.

Iron oxides.

Chromium oxides.

Vanadium oxides

Answer:

A balanced chemical reaction is an equation where the number of atoms of each type in the response is the same on both reactants and product sides.

Explanation: Burning, and cooking are two examples. :)

Hope you are happy :)

Cathode: 2 Ag+ (aq) + 2 e- → 2 Ag (s). Anode: 2 H+ (aq) → H2 (g) + 2 e-.

What is cathode ?

A cathode is an electrode in an electrical circuit from which electrons flow out. It is usually made of metal and is negatively charged. Cathodes are commonly used in electronic devices such as batteries, lamps, and vacuum tubes. In a battery,

the cathode is the terminal which provides a negative charge and is usually connected to the negative terminal of the battery. In a vacuum tube, the cathode is the source of electrons which flow through the tube to the anode, which is the positive terminal.

To learn about more cathode .

https://brainly.com/question/4052514

#SPJ1

The volume of acid required to prepare 8dm3 of 0.5moldm-3 solution of the compound is 203 cm3.

Volume is the amount of space that an object or substance occupies. It is typically measured in cubic units, such as metres cubed (m³). Volume is an important concept in mathematics, physics, and engineering. Volume plays an important role in everyday life; for example, the volume of water in a swimming pool can be measured to determine how much water needs to be added or subtracted. Volume is also used to measure the amount of a substance, such as oil or gas. The volume of a container can also be used to measure the amount of material contained within it. Volume can also be used to measure the capacity of a container, such as a bucket or a tank. In addition, volume can be used to calculate the mass of an object by measuring its density.

The mass of acid required to prepare 8dm3 of 0.5moldm-3 solution of the compound is:
M = 8 x 0.5 x 98 = 392 g
The volume of acid required to prepare 8dm3 of 0.5moldm-3 solution of the compound is:
V = 392 / (1.84 x 0.97) = 203 cm3
Therefore, the volume of acid required to prepare 8dm3 of 0.5moldm-3 solution of the compound is 203 cm3.

To learn more about volume
https://brainly.com/question/28717703
#SPJ1

There is a golden rule of solubility, non polar solute dissolve in non polar solvent and polar solute dissolve in polar solvent. Therefore, the correct option is option B.

Solution is a homogeneous mixture of two or more than two substances. A solution is a homogeneous mixture of solute and solvent molecules. Solvent is a substance that is in large amount in solution. solute is the substance which is in small amount in a solution.

There are two types of mixture that is homogeneous and heterogeneous. Solution is a homogeneous solution. The nature of solvent tells about whether the solvent is in liquid, solid or gas form.

Let amount of 30% to mix, be X

Then amount of 18% to mix = 300 - X

0.3X + 0.18(300 - X) = 0.21(300)

0.3X+ 0.18(300) - 0.18X= 0.21(300)

0.3X - 0.18X =0 .21(300) -0 .18(300)

0.12X =0 .03(300)

X=75L

Therefore, the correct option is option B.

To know more about solution, here:

https://brainly.com/question/13812915

#SPJ1

Explanation:

This hot material rises to an area of lower pressure through the process of convection. Areas of lower pressure always have a lower melting point than areas of high pressure. This reduction in overlying pressure, or decompression, enables the mantle rock to melt and form magma.

Electrons first occupy the position in lowest possible energy.

orbital diagrams:-

The higher the energy level, the Third energy the electrons in that level have. On the orbital diagram, fill in the boxes to label the representations of an orbital and a sublevel.   2   electrons can occupy a single orbital, and these electrons have Opposite spin. Within a sublevel, all the orbitals fill with one electron, each of which has the Positive spin before a second electron fills any of the orbitals.

what is Orbital?

Each energy position is made up of areas known as an orbital. An orbital is an area of probability in which electrons can be set up. Each energy position, except for the first, has further than one orbital. Each orbital has a specific shape.

To know more about Energy levels here:

brainly.com/question/29736874

#SPJ1

Answer: 1s2 2s2 2p4

Explanation:

Recall the number of electrons an orbital can have:

s orbitals have 2, p orbitals have 6, d orbitals have 10, f orbitals have 14, and so on.

Oxygen in its neutral state would have 8 electrons.

To summarize the diagonal filling order, it goes from the least energy level to the most, and the orbital with the least amount of orbitals to the most.

So, the order for this will go from 1 and end at 2 (for energy level,) then s, s again (as energy level 1 has 1s orbital only,) and p.

So, the first energy level, 1s2 (2 electrons), leaves the remaining six electrons.

Completely fill the s orbital (another 2 electrons), and the remaining 4 electrons will be in the respective p orbital.

Thus, it is 1s2 2s2 2p4.

Considering the definition of molality, the molality of the KCl in the solution is 6.56 moles/kg.

Molality, or molal concentration, is the amount of a substance dissolved in a given mass of solvent. It is defined as the moles of a solute per kilogram of solvent.

The Molality of a solution is determined by the expression:

molality= number of moles of solute÷ kilograms of solvent

In this case, you know:

Replacing in the definition of molality:

Molality= 1.41 moles÷ 0.215 kg

Molality= 6.56 moles/kg

The molality of the solution is 6.56 moles/kg.

Learn more about molality:

brainly.com/question/20366625

brainly.com/question/4580605

#SPJ1

The number of moles of the ideal gas is 0.12 moles. Option A

In the context of the problem that we have here, we are looking at the ideal  gas equation. When we look at the idea gas equation, we can tell that we would have the pressure of the gas, the volume of the gas as well as the temperature of the gas in view as is the case that we have here.

Thus, the idea that we are asked to pass across in the question is that we should be able to find out the number of moles that we have in the compound that have the variables that have been listed here.

Pressure (P) =  1 atm

Volume (V) = 1 L

Temperature (T) = 1 K

Number of moles (n) = ?

Using;

PV = nRT

n = PV/RT

n = 1 * 1/0.082 * 1

n = 0.12 moles

The moles of the gas is 0.12 moles.

Learn more about ideal gas:https://brainly.com/question/28257995

#SPJ1

The mass of hexane, C₆H₁₄ that would be needed to produce 562 grams of carbon dioxide, CO2 is 183 g

We'll begin by writing the balanced equation for the reaction.

2C₆H₁₄ + 19O₂ → 12CO₂ + 14H₂O

From the balanced equation above,

528 g CO₂ were produced from 172 g of C₆H₁₄

With the above information, we shall determine the mass of hexane, C₆H₁₄ needed to produce 562 g CO₂. Details below:

From the balanced equation above,

528 g CO₂ were produced from 172 g of C₆H₁₄

Therefore,

562 g of CO₂ will react to produce = (562 × 172) / 528 = 183 g of C₆H₁₄

Thus, the mass of hexane, C₆H₁₄ needed is 183 g

Learn more about mass:

https://brainly.com/question/25824598

#SPJ1

Answer:

a whole new world too be into

Explanation:

The sections of the heating curve illustrate this process Section A followed by B. Therefore, option D is correct.

The term heating curve is defined as the graphical representation of the correlation between heat input and the temperature of a substance.

At section, A solid Ice at temperature 0°C can heat  for about 10 mins and all the energy generated from heating up the ice is used to split the bonds which binds the ice together as a solid.

At Section, B the liquid water at 100°C covert to vapor because the heat energy required here split the bond between the water molecules then they are move in random directions as vapor.

Thus, option D is correct.

To learn more about the heating curve, follow the link;

https://brainly.com/question/10481356

#SPJ1

Your question is incomplete, probably your question was

As a sample of water is heated, the energy is used to overcome the attractions between the molecules so that they are no longer held close together and can move in random directions. Then, the kinetic energy of its molecules increases. Which sections of the heating curve illustrate this process?

As a sample of water is heated, the energy is - 1

Image is attach below

Answer: chemical change

Answer:

it should be chlorine gas

Explanation:

The VSEPR drawing for the compounds in the question are shown in the images attached.

We have to know that according to the valence shell electron pair repulsion theory, the structure of the molecule can be found by looking at the number of electron pairs that surround the central atom in the molecule.

Now the structure of the compounds as we can see in the images that ahve been attached are based on the Vlence Shell electron pair repulsion drawing for each of the compounds that we have mentioned in the question.

We can see that the structure of the compound must have a central atom and then the other atoms in the molecule are arranged around the central atom of the molecule.

The molecule would have a definite shape that is based on the number of electron shells in the molecule.

Learn more about molecule:https://brainly.com/question/19922822

#SPJ1

Answer:

623 kgm^-3

Explanation:

Density = Mass/Volume

Mass = 1209 kg

Volume = 1.94 m^3

Density = 1209 / 1.94 kgm^-3

             = 623.1958763 kgm^-3

             = 623 kgm^-3 (3sf)

Helen takes 35 nights to knit a total of 175 centimeters of scarf. Hence, she will take 36 nights to knit 180 centimeters of scarf.

Length is a basic measurement in for an object which is basically taken in meters or centimeters. The basic unit of length in American standard is meters (m) and in CGS system it is centimeters.

It is given that, Helen knit a total of 175 centimeters of a scarf over 35 nights. Then, the length she knit in one nigh is calculated as:

175/35 = 5 cm.

Therefore, the number of nights required to complete 180 cm is :

180 /5 = 36

Thus, she will take 36 nights to knit a total of 180 cm of scarf.

Find more on length units:

https://brainly.com/question/3217720

#SPJ1

Answer:

A glove is like the earth because...

A globe is like the earth in that it is a three-dimensional representation of the earth's features, such as countries, oceans, and landmasses.

A globe is also like the earth in that it can rotate on its axis, which allows the viewer to see different parts of the earth depending on the angle of rotation.

A globe is not like the earth because...

A globe is not like the earth in that it is typically much smaller than the earth.

A globe is also not like the earth in that it does not depict the earth's relief features, such as mountains and valleys, in their true proportion to the rest of the earth's surface.

A globe is like the earth in that it is a scaled-down, spherical model of the earth's surface, representing physical features accurately. However, a globe is not like the earth because it is much smaller and does not rotate or revolve.

The globe and the earth are similar in two main ways. First, a globe is a scaled-down model of the earth, showing an accurate representation of the earth's surface. This includes physical features such as continents, oceans, and countries, which are mapped out precisely. Second, a globe is spherical, just like the earth.

However, there are differences between a globe and the earth. One key difference is the scale: the earth is far larger than any globe. The most obvious point of difference is the size: while a globe is small enough to be held in your hands or placed on a desk, the earth has a diameter of approximately 7,917.5 miles. Also, the globe is a static object, it does not rotate on its axis or revolve around the sun like the earth does.

https://brainly.com/question/13254506

#SPJ2

The mass of 65% and 20% nitric acid that must be mixed to produce 4.5 kg of 30% nitric acid are 1.306 kg and 3.189 kg respectively.

The volume of 4.5 kg of 30% nitric acid is determined using the formula below:

The density of 30% nitric acid is 1.18 g/mL

The mass of the  30% nitric acid is 4.5 kg or 4500 g

Hence, the volume will be:

The volume of 30% nitric acid = 4500 / 1.18

The volume of 30% nitric acid = 3813.56 mL

The volume of 65% and 20% nitric acid required is then determined.

Let the volume of the 65% and 20% nitric acid be x and y respectively;

x + y = 3813.56 ---(1)

amount of acid in 3813.56 ml solution = 30% * 3813.56

amount of acid in 3813.56 ml solution = 1144.07 mL

therefore;

60% * x + 20% * y = 1144.07 mL

0.6x + 0.2y = 1144.07 ----(2)

Solving for x and y in the two equations

From (1), x = 3813.56 - y

Substitute x = 3813.56 - y in (2)

0.6(3813.56 - y) + 0.2y = 1144.07

0.4y = 1144.07

y = 2860.18 mL
x = 3813.56 - 2860.18

x = 953.38 mL

The mass of the acids required is then determined as follows:

The density of 60% nitric acid is 1.37 g/mL

Mass of 60% nitric acid required = 953.38 mL * 1.37 g/mL

Mass of 60% nitric acid required = 1306 g or 1.306 kg

The density of 20% nitric acid is 1.115 g/mL

Mass of 20% nitric acid required = 2860.18 mL * 1.115 g/mL

Mass of 20% nitric acid required = 3189 g or 3.189 kg

Learn more about mass, density, and volume at: https://brainly.com/question/26364788

#SPJ1

Answer:

The answer is the last one only.

Explanation:

Light/sun gives energy and growth which makes the plants leaves/plant grow bigger.

Explanation:

Without the sun, plants wouldn't get the food that's needed to grow, reproduce and survive. plants need sunlight, water and carbon dioxide to live.

Answer:

Acyclic or Open-chain compounds. Cyclic or Closed-chain compounds.

Answer:

Clastic or detrital sedimentary rocks are made from pieces of bedrock, sediment, derived primarily by mechanical weathering.

Explanation:

The boiling points increase down the group.Thus, option C is the answer.

Group 0, also known as the noble gases, is a group of chemical elements in the periodic table. These elements are all characterized by having a full valence shell of electrons, which gives them little tendency to gain or lose electrons and makes them generally unreactive. As a result, the elements in Group 0 are not very reactive and do not form many compounds.

The boiling points of the elements in Group 0 generally increase as you go down the group. This trend is due to the increasing atomic radius of the elements as you go down the group. The larger the atomic radius, the more space there is between the atoms in a substance, and the more energy is required to overcome the attractive forces between the atoms. This results in a higher boiling point.

In contrast, the relative atomic masses (Ar) of the elements in Group 0 generally decrease as you go down the group. This is because the atomic radius increases as you go down the group, but the number of protons in the nucleus (and therefore the atomic mass) does not change significantly. As a result, the relative atomic mass decreases as the atomic radius increases.

To know more about Group:

https://brainly.com/question/29761108

The most common example is the molar volume of a gas at standard temperature and pressure (STP), which is equal to 22.4 L for 1 mole of any ideal gas at 273.15 K and 1 atm of pressure.

Stoichiometry refers to the quantitative relationship between reactants and products. Calculating the quantities of reactants needed to make a given quantity of products, or the quantities of products resulting from a given quantity of reactants, is required in stoichiometric problems. Gas laws must be taken into account for the calculation if one or more reactants or products in a chemical reaction are gases. The findings of ideal gas law applications are often accurate to within 5%. We go over a few key ideas that are crucial for solving Stoichiometry Problems involving Gases in the sections below.

Stoichiometry and gas laws both rely on the mole notion as their foundation. A mole is an exact measurement of a substance. Based on the quantity of identities, a mole is a unit (i.e. atoms, molecules, ions, or particles). The number of identities in a mole of anything is equal to the number of atoms in exactly 12 grams of carbon-12, the most common isotope of carbon.

Learn more about Ideal Gas Law- Molar Volume: https://brainly.com/question/15132707

#SPJ1

Answer:

Uranium experiences a stronger net force holding its protons and neutrons together than barium.

Explanation: